Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 243 for “"Pressure Transducer"”.
-
A fiber optic pressure transducer.
A pressure transducer with an outside diameter of 0.190" has been built and statically tested. The transducer used a glass fiber bundle 0.109" in diameter to transmit and receive reflected light from a pressure diaphragm. The amount of light returned to a photosensor was dependent upon the …
-
Feasibility of a reflective pressure transducer
<p>Most commercial pressure transducers make use of rather mature technologies for converting pressure into more easily manipulated electrical signals. The strain gauge and the capacitive transducer are but two of the more popular methods now in use. This study looks at the feasibility of designing …
-
Design of Frequency Output Pressure Transducer
… part. There are 4 parts in the frequency output pressure transducer: two crystal oscillators, phase-locked loop (PLL), mixer, frequency counter. Crystal oscillator is used to activate the piezoelectricity crystal which is made from quartz. The resonance frequency of the piezoelectricity crystal …
-
A Pressure Transducer Using Field Emitter Arrays
A new pressure sensing device using field emission from diamond coated silicon tips has been developed. A high electric field applied between a nano-tip array and a diaphragm configured as electrodes produces electron emission governed by the Fowler - Nordheim equation. The electron emission is …
-
Development of a flat frequency response pressure transducer system.
… the frequency response of a cascaded remote pressure transducer system has been developed. This prediction was used to find a theoretical configuration which would produce a fairly flat frequency response (1.00 ± 0.05) over a 100 hertz range. Such a configuration would allow cross …
-
Improved passage design for a spark plug mounted pressure transducer
Combustion chamber pressure measurement in engines via a passage is an old technique gaining new acceptance from the modern scientific community. While it was once used to facilitate pressure measurements from indicators that were too large to mount flush in the combustion chamber, it is now used …
-
An investigation of a condenser microphone as a pressure transducer
The device described is a preasure-sensitive transducer. commercially available condenser microphone, a Stephens model C-1 was used as a capacitor manometer. The instrument was developed for use in breath velocity studies where pressures encountered are thousandths of pounds per square inch. A …
-
The Design and Performance of a Fiber Optic Pressure Transducer
… and performance characteristics of a fiber optic pressure transducer are presented and discussed. The transducer consists of a cylindrical metal housing with a specular reflecting aluminum diaphragm at the distal end and a circular array of fiber optic light guides at the proximal end. The center …
-
An economic analysis of the wireless intraocular pressure transducer (WIT)
… many risk factors for blindness, intraocular pressure (IOP) is the only one that can be effectively altered by physicians. While a rigorous monitoring of IOP will improve the care of patients through early diagnosis and prompt treatment, the frequent visits patients must make to the clinic …
-
The design of a pressure transducer for measuring silage pressures
Thesis (M.S.)--Michigan State University of Agriculture and Applied Science. Dept. of Agricultural Engineering, 1960
-
A feasibility and design study for an electro-optical pressure transducer
… of the feasibility of using an electro-optical pressure transducer and optical membranes for measuring static surface pressures is reported here. The fundamental geometrical characteristics of a circular membrane under a uniform pressure load are examined, leading to the development of …
-
Development and evaluation of an interface pressure transducer for biomedical applications
The measurement of the interface pressure between a biomedical device and part of the human body is useful to aid in the design or improve the performance and safety of such devices. Therefore, a need exists for a transducer to measure interface pressure in these applications. The development and …
-
Characterization, Modeling of Piezoelectric Pressure Transducer for Facilitation of Field Calibration
… calibration technique concerning piezoelectric pressure sensor to reduce cost and improve reliability. This paper summarizes the algorithm used to characterize and develop a model for a piezoelectric pressure transducer. The basic concept of the method is to excite the sensor using an electric …
-
Analysis of in-cylinder pressure transducer data quality utilizing a SIDI turbocharged engine
In-cylinder pressure transducers have been used for decades to record combustion pressure inside a running engine. However, due to the extreme operating environment, transducer design and installation must be considered in order to minimize measurement error. One such error is caused by thermal …
-
Development of a pressure transducer to measure the time-varying pressures generated in a radial face seal
… was the development and calibration of a pressure transducer to measure the time-varying pressure generated in the sealing region of a radial face seal. The transducer was to measure the fluid film pressure with minimum flow disturbance.</p><p>The method consisted of cementing a stainless …
Page 1 of 13