Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 2097 for “"Pressure drop"”.
-
Pressure drop in spouted beds.
… work contains the result of an investigation on pressure drop in sprouted beds. Six inch columns with a 0.5" air inlet orifice were used during the course of the investigation. The spouting medium was air. The gas flow rates vary from 84 to 1077 pounds per hour per square foot of column cross …
-
Hydraulic quick coupler pressure drop
Thesis (M.S.)--Michigan State University. Department of Agricultural Engineering, 1971
-
Pressure drop through a packed bed
… core. With regard to thermal-fluid simulations pressure drop correlations are very important, and must be validated experimentally. The High Pressure Test Unit (HPTU) was designed, built and successfully commissioned to provide a facility capable of producing the range of experimental results …
-
Pressure Drop in a Pebble Bed Reactor
Pressure drops over a packed bed of pebble bed reactor type are investigated. Measurement of porosity and pressure drop over the bed were carried out in a cylindrical packed bed facility. Air and water were used for working fluids. There are several parameters of the pressure drop in packed beds. …
-
Transvalvular pressure drop estimation for aortic stenosis
… systolic function. Peak velocity, mean pressure drop and the effective orifice area obtained from Doppler Echocardiography are the first-line, non-invasive metrics of severity. These techniques rely upon devolved physics applied to a one-dimensional estimation of the peak aortic jet …
-
VERIFICATION OF ADDITIVE MANUFACTURED PRESSURE DROP COMPONENTS
… the use of additive manufacturing in producing pressure drop components inside fluid loops. A design was studied through Computation Fluid Dynamics modeling and produced using different additive manufacturing methods. A scaled loop was also designed to measure the performance and viability of …
-
Pressure Drop Across a Restriction of Annular Geometry
This report presents experimental results for the pressure drop across a restriction of annular geometry used in a typical pressurized water reactor steam generator. The pressure drops were obtained for air, water, and the corresponding two-phase mixtures. The loss coefficients associated with …
-
Pressure drop in headers of microchannel heat exchangers
Submission published under a 24 month embargo labeled 'Closed Access', the embargo will last until 2024-05-01
-
Pressure drop in packed beds of metal Raschig rings
… higher void space should also result in lower pressure drops than would be encountered with ceramic rings. The purpose of this research program was to determine the pressure drop-flow characteristics of this packing, and to develop suitable correlations for design of packed absorption …
-
Heat transfer and pressure drop in internally finned tubes.
Heat transfer and pressure drop characteristics are investigated using finite difference technique for a laminar forced convection fully developed flow in internally finned circular tubes, assuming a fin shape very close to the real fin configuration. For the same mass flow rate, the larger number …
-
Analysis of the pressure drop through structured packed beds
Accurately analysing the pressure drop over structured packed beds is of great importance to certain reactor designs, such as the Pebble Bed Modular Reactor (PBMR). In previous studies, the High Pressure Test Unit (HPTU) was used to conduct pressure drop experiments for three structured packed beds …
Page 1 of 105