Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 49 for “"Pressure--Testing"”.

  1. External Pressure Testing of High Density Polyethylene Pipe

    … procedure will enable one to perform external pressure tests, while the new equation will enable one to determine the collapse pressure of four inch diameter high density polyethylene pipe. This thesis is part of a three phase program and is a preliminary type of study.

    marquette Repository record for External Pressure Testing of High Density Polyethylene Pipe (opens in a new tab)

  2. Post-Tensioning Duct Air Pressure Testing Effects on Web Cracking

    … the construction process. The ducts were air pressure tested to ensure the duct can successfully be grouted for a bonded post-tensioned system. During the air pressure testing, tendon stressing and grouting, web cracks form that cause delamination of the concrete in the web that lead to …

    unr Repository record for Post-Tensioning Duct Air Pressure Testing Effects on Web Cracking (opens in a new tab)

  3. High Pressure Testing Of Composite Solid Rocket Propellant Mixtures: Burner Facility Characterization

    … laboratory setting is to use a constant-volume pressure vessel, or strand burner. To provide high-pressure burn rate data at pressures up to 360 atm, the authors have installed, characterized and improved a strand burner facility at the University of Central Florida. Details on the facility and …

    ucf Repository record for High Pressure Testing Of Composite Solid Rocket Propellant Mixtures: Burner Facility Characterization (opens in a new tab)

  4. The Design, Fabrication, and Pressure Testing of a Low-Temperature Co-Fired Ceramic Electric Propulsion Thruster

    … thesis specifies the design, fabrication, and testing of a thruster and its fluid delivery system designed for use with a micro-satellite weighing less than fifty kilograms. The advent of Micro-Electro-Mechanical Systems (MEMS) has sparked a new market with incredibly small scale designs. Using …

    boise Repository record for The Design, Fabrication, and Pressure Testing of a Low-Temperature Co-Fired Ceramic Electric Propulsion Thruster (opens in a new tab)

  5. Hydrostatic Pressure Testing of a Square-Cross Section Stainless Steel Propellant Tank Manufactured Using Selective Laser Sintering

    … was accomplished by performing a hydrostatic pressure test (HPT) of a metal SLS manufactured propellant tank, constructed for a nano-satellite of the cubesat class. Strain measurements from twelve strain gage locations on the propellant tank were recorded. A finite element analysis (FEA) …

    embry-riddle Repository record for Hydrostatic Pressure Testing of a Square-Cross Section Stainless Steel Propellant Tank Manufactured Using Selective Laser Sintering (opens in a new tab)

  6. Experiments with a free floating wave buoy

    … was used to obtain a time series of wave-induced pressure variations in deep water. The meter's response was roughly checked against a piston-type pressure testing apparatus. Techniques in the operation of the meter were developed involving a slight modification in the suspension of the sensor. …

    nps Repository record for Experiments with a free floating wave buoy (opens in a new tab)

  7. Laser microfabrication and testing of silicon carbide diaphragms for MEMS applications

    … by means of nanoindentation and a novel pressure testing apparatus. Mechanical tests indicate that the diaphragms remain sealed under applied gas pressure and that the heat effects and variations in pulse energy from the laser reduce the overall mechanical strength of the diaphragms.</p>

    iastate Repository record for Laser microfabrication and testing of silicon carbide diaphragms for MEMS applications (opens in a new tab)

  8. Glass-Polymer Composite Pipes and Joints: Manufacturing, Testing, and Characterization

    … feasibility of GFRP pipe implementation in high- pressure, transmission lines. These investigations have sought to determine GFRP pipe properties of strength, stiffness, corrosion resistance, failure modes, and long-term behavior.;During this project, hydrostatic burst pressure testing (internal …

    wvu Repository record for Glass-Polymer Composite Pipes and Joints: Manufacturing, Testing, and Characterization (opens in a new tab)

  9. Effect of End-Plate Tabs on Drag Reduction of a 3D Bluff Body with a Blunt Base

    This thesis involves the experimental testing of a bluff body with a blunt base to evaluate the effectiveness of end-plate tabs in reducing drag. The bluff body is fitted with interchangeable end plates; one plate is flush with the rest of the exterior and the other plate has small tabs protruding …

    calpoly Repository record for Effect of End-Plate Tabs on Drag Reduction of a 3D Bluff Body with a Blunt Base (opens in a new tab)

  10. Leakage Characterisation in Bulk Pipes using Pressure Tests

    … bulk pipelines in the field were tested with a pressure testing device developed by the University of Cape Town. With this device, a range of pressures were applied to various pipeline sections and the corresponding leakages were measured, resulting in characteristic pressure-leakage …

    cape-town Repository record for Leakage Characterisation in Bulk Pipes using Pressure Tests (opens in a new tab)

  11. Characterization and optimization of laser-induced graphene (LIG) based capacitive pressure sensors for aerospace applications

    … application in monitoring airframe surface pressures to enhance aircraft performance and aerodynamic efficiency. A capacitive pressure sensor was developed using 1” square LIG electrodes, formed by irradiating a CO₂ laser on a Kapton polyimide film. The sensor’s behavior was studied across a …

    texas Repository record for Characterization and optimization of laser-induced graphene (LIG) based capacitive pressure sensors for aerospace applications (opens in a new tab)

  12. Studies on the module structure for the NOvA liquid scintillator neutrino detector

    … units. It was found that reducing the pressure testing of the modules from 1.4 bar to 0.7 bar and increasing the rigidity of the pressure test containment units eliminated the formation of visible cracks in the manifold covers.

    umn Repository record for Studies on the module structure for the NOvA liquid scintillator neutrino detector (opens in a new tab)

  13. Design and Analysis of a Toroidal Jet-Stirred Reactor for Ammonia-Hydrogen Jet Engine Development

    … as well as provide means to connect it to a pressure vessel or other piping. This work will allow for chemical mechanism validation of lean blowout in ammonia-hydrogen mixtures while laying the foundation for future high-pressure testing of such mixtures up to 60 bar.

    ucf Repository record for Design and Analysis of a Toroidal Jet-Stirred Reactor for Ammonia-Hydrogen Jet Engine Development (opens in a new tab)

  14. A Study on High Pressure-Induced Phase Transformations of a Metastable Complex Concentrated Alloy System with Varying Amounts of Copper

    … investigate the effect of copper on the critical pressure for activating TRIP and the high pressure stability of a Fe(40-X)Mn20Cr15Co20Si5CuX TRIP CCA, where x varies from 0 to 3 at.% Cu. To achieve this goal, diamond anvil cell testing during in-situ synchrotron radiation X-ray diffraction was …

    unt Repository record for A Study on High Pressure-Induced Phase Transformations of a Metastable Complex Concentrated Alloy System with Varying Amounts of Copper (opens in a new tab)

  15. Η χρήση μεβράνης κολλαγόνου ίππειου περικάρδιου για την αποκατάσταση ελλειμάτων στομάχου: πειραματική μελέτη

    … cavity (including adhesion scoring), mechanical testing and histologicalexamination of the stomach were performed.Results All animals survived the operative procedure and had a normal post-operative course,without complications, until euthanasia. None of the patches failed and the abdomen …

    greece Repository record for Η χρήση μεβράνης κολλαγόνου ίππειου περικάρδιου για την αποκατάσταση ελλειμάτων στομάχου: πειραματική μελέτη (opens in a new tab)

  16. Mechanical properties of the Bakken Formation

    … coefficients describe the ability of the pore pressure to counteract the outward stresses on the rock and will be between zero and one. The values for all formations were well below one and ranged from 0.15-0.75 over the unit of interest. The saturated stiffness tensor and Biot's coefficients …

    colo-mines Repository record for Mechanical properties of the Bakken Formation (opens in a new tab)

  17. Characterization of Ultra-High-Speed Friction Stir Welds Made in Thin Sheet AA6061-T4 Material

    … were further assessed through microhardness testing, tensile and fatigue testing, pressure testing, and electron backscattering diffraction. It was demonstrated that loading direction of the weld had a significant impact on performance, with the advancing side proving to be stronger than the …

    byu Repository record for Characterization of Ultra-High-Speed Friction Stir Welds Made in Thin Sheet AA6061-T4 Material (opens in a new tab) Download PDF for Characterization of Ultra-High-Speed Friction Stir Welds Made in Thin Sheet AA6061-T4 Material (opens in a new tab)

  18. A Silicon and Silicon Carbide Bonding Methodology for Cooling High Heat Flux Electronics

    … used. While important, leak-proof bonding at pressures of 60 psi or greater has proven difficult to achieve. To address this challenge, a novel bonding procedure for a silicon manifold-microchannel heat sink was developed. Since the components of the manifold-microchannel heat sink were made …

    maryland Repository record for A Silicon and Silicon Carbide Bonding Methodology for Cooling High Heat Flux Electronics (opens in a new tab)

  19. Development and Characterization of a New Very High-Pressure Strand Burner for Studying Propellant Burning Rates at Extreme Temperatures

    … combustion such as extreme temperatures and high pressures. While the burning rates of AP/HTPB-based solid rocket propellants up to pressures of 2000 psi are well documented, relatively little data at higher pressures exists. Therefore, a new high-pressure, constant-volume strand burner facility …

    tamu Repository record for Development and Characterization of a New Very High-Pressure Strand Burner for Studying Propellant Burning Rates at Extreme Temperatures (opens in a new tab)

  20. Flooding Experiments with Steam/Water and Air/Water at Elevated Pressure in a Large Diameter Vertical Tube

    … steam/water and air/water fluid pairs at elevated pressures was conducted. This research provides the first flooding data above atmospheric pressure in large diameter vertical tubes and can be used to improve the flooding models in one-dimensional system codes. A stainless steel test section …

    tamu Repository record for Flooding Experiments with Steam/Water and Air/Water at Elevated Pressure in a Large Diameter Vertical Tube (opens in a new tab)

Page 1 of 3