Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 38 for “"Pressure-Impulse"”.
-
Pressure-impulse diagrams using finite element analysis for reinforced concrete slabs subjected to blast loading
… events. Blast events subject structures to high pressure and impulse loads. The magnitude of blast load experienced by a structural element is directly related to the exposed area. Hence protection of reinforced concrete slabs and walls, which constitute the maximum exposed area of a structure …
-
Pressure-impulse diagrams using finite element analysis for reinforced concrete columns subjected to blast loading
… high strain rates. At the structural level, Pressure-Impulse diagrams for reinforced concrete columns that have four configurations of transverse reinforcement are developed. Finite element modeling in LS-DYNA is used to analyze the structures and calculate the damage level for each blast …
-
Graphics-assisted tool for the automated numerical modelling of blast-loaded masonry structures - An automated finite-element workflow for constructing pressure–impulse failure diagrams of unreinforced masonry walls
Pressure-impulse diagrams provide a compact representation of the failure boundary of a structural element under blast loading, but their construction for masonry walls is expensive, where each point requires a full dynamic finite-element analysis. This thesis develops a methodology and an …
-
Dynamic analysis of steel confined concrete tubular columns against blast loads
… the last chapter, a numerical method to generate pressure-impulse diagrams for CFDST columns is proposed which uses a damage criterion involving the residual axial load-carrying capacity. Based on the numerical method, pressure-impulse diagrams for different column configurations are derived and …
-
Multidisciplinary Design Optimization for Sonic Boom Mitigation
… takes into account variations in temperature and pressure with altitude. The far-field signal prediction is handled using the classical linear Thomas Waveform Parameter Method where the switching altitude from the nonlinear to linear prediction is determined by convergence of the ground signal …
-
Experimental Behavior of High Strength Concrete Slabs Subjected to Shock Loading
… load simulator are presented in this thesis. The pressure, impulse, and deflection time histories generated from the experiments along with the predicted panel deflection and damage responses are presented. The pressure impulse (PI) curves developed using a SDOF model are compared with the …
-
Experimental and Analytical Investigation of Steel Hardened Curtain Wall Mullions
… against the experimental results. In addition, Pressure-impulse (P-I) diagrams were developed as design aids for different pressure-impulse combinations. The retrofit techniques developed were applied to a selected prototype building to assess their feasibility for use in practice. Two different …
-
Experimental Investigation of Gaseous Oxyacetylene Blast Enhancement by the Combustion of Suspended Multimodal Spherical Aluminum Powder
… Shock Tube Research Facility to measure blast pressure, impulse, and heat release efficiency during combustion in these detonations. These results were compared against oxyacetylene detonations conducted with the addition of unimodal aluminum particles approximately 1, 10, 30, and 95 μm in …
-
Performance and Design of Retention Anchors in Blast Resistant Windows
… in building façade are vulnerable to blast pressures. When subjected to blast shock waves, glass windows may suffer failures, potentially causing serious injuries and casualties to the building occupants due to the flying glass shards and other projectiles. Protective films and laminated …
-
Blast Performance Quantification Strategies For Reinforced Masonry Shear Walls With Boundary Elements
… the walls’ performance under blast loads. The pressure impulse diagrams were generated to assess the capability of the current response limits in quantifying the different damage states for walls with different design parameters. Furthermore, new response limits were proposed to account for the …
-
First-principle simulation of blast barrier effectiveness for the development of simplified design tools
… approach is demonstrated to estimate the peak pressure, impulse, time of arrival, and time of duration of blast loads on buildings protected by simple barriers, using data generated from validated computational hydrocode simulations. Once verified and validated, the proposed neural-network …
-
Features and Applications of the Laser-induced Spark as a Monopole Source for Acoustic Impulse Response Measurements
Impulse responses of acoustic systems allow us not only to analyze the acoustical behavior of the system, but also to synthesize that acoustical behavior by other means, e.g., reproducing virtual sources in rooms over headphones. Characteristics of the acoustic source like directivity, size, …
-
Analytical models for calculating the response of temporary soil-filled walls subjected to blast loading
… which could be used to efficiently calculate a pressure-impulse (P-I) curve. An explicit finite element (FE) formulation was constructed using LS-Dyna software, and two analytical models were also derived and presented: a Rigid-Body Rotation model as a preliminary model, and the Rigid-Body …
-
Wave impacts on rectangular structures
… mixture and hence the value of the acoustic pressure that acts as a maximum cutoff for pressure calculated by any incompressible model. The results are also highly sensitive to the angle of alignment of the wave front and seawall. Here we consider the worst case scenario of perfect alignment. …
-
Breakage response of glass panels subject to long-duration blast
… phase duration greater than 40ms. Resulting impulses can cause window failure several kilometres away from the point of detonation. Data from long-duration blast events indicate window failure is highly dependent on glazing aspect ratio, area and other structural parameters. Inconsistency in …
-
The Dynamic Response of Concrete Filled FRP Tubes Subjected to Blast and Impact Loading
… blast loading for SDOF analysis of CFFTs and Pressure-Impulse diagrams. The use of SDOF modeling and conservation of energy in blast design were also discussed. Finally, a non-linear explicit dynamic model of CFFTs was developed using the commercial software ANSYS Autodyn. This model was …
-
Behavior and design of steel-plate composite (SC) walls for blast loads
… specific blast loads is presented along with pressure-impulse diagrams for use as design tools or aids.
-
Explainable Machine Learning Frameworks for Predicting Blast Load Parameters in Free-Air and Air Blast Scenarios
… key blast parameters, such as peak incident pressure, impulse, reflected pressure, and time of arrival in free-air blasts. While all models demonstrated high accuracy, ANNs outperformed others in capturing the continuous variation of blast pressures, making them the preferred choice for …
-
Acoustical modeling of the transient response of rooms using a beam-tracing model
… a rigid plane. The new model can predict the pressure impulse response between the source and receiver, which is required for obtaining the temporal response of rooms to other sound sources, as well as for deriving room-acoustical parameters that correlate with subjective perception of sound. …
Page 1 of 2