Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 46 for “"Pressureless sintering"”.
-
Pressureless Sintering Of Powder Processed Functionally Graded Metal-Ceramic Plates
… alumina through powder processing techniques and pressureless sintering for dynamic mechanical characterization. An approach is employed to control the thermal shrinkage of each microstructure during sintering by varying particle sizes of the two powders. Models were developed to understand both …
-
Pressureless sintering and oxidation resistance of zrb2 based ceramic composites
… concentrations of B4C, SiC, TaB2, and TaSi2 were pressureless-sintered and post-hot isostatic pressed to their theoretical densities. Oxidation resistances were studied by scanning thermogravimetry over the range 1150 - 1550 degree C. SiC additions improved oxidation resistance over a broadening …
-
Pressureless Sintering of SiC - Oxide Multiphase Ceramics for Protective Coating Applications
… characterization to further understand their sintering behaviors. In this study, a processing procedure to consistently produce dense composite ceramics of PDC SiC – Y2Si2O7 and PDC SiC – Gd2Zr2O7 at varying ratios was established. Polymer-derived SiC (PDC SiC) has shown to be a suitable …
-
Ablation Properties of HfC-SiC-WC Ultra-High Temperature Ceramics Produced by Pressureless Sintering
… loads. In this study, we explore the use of pressureless sintering to produce this material at relatively low temperatures (2100 oC) and focus on understanding the effect of adding WC, in the 0 to 20 wt.% range, on its ablation resistance. The sintered samples were evaluated for their …
-
Pressureless Sintering and Mechanical Properties of SiC Composites with in-situ Converted TiO2 to TiC
… of the SiC-TiC composite system were studied. Pressureless sintering experiments were conducted on samples containing 0 to 30 vol % TiC created through an in-situ reaction between TiO2 and C: TiO2 + 3C -> TiC + 2CO. Sintering of the compacts was carried out in the presence of Al2O3 and Y2O3 …
-
Pressureless Sintering of Powder Processed Graded Metal-Ceramic Composites Using a Nanoparticle Sintering Aid and Bulk Molding Technology
… properties through the use of a nanoparticle sintering aid, (2) modeling of shrinkage-induced stresses to determine gradient architectures where cracking does not occur, and (3) fabrication of graded metal-ceramic composites using pressureless sintering and bulk molding technology. A new …
-
Preparation, microstructure, mechanical and thermophysical properties of short carbon fibre/SiC multilayer composites by tape casting and pressureless sintering
… (Csf/SiC) were prepared by tape casting and pressureless sintering. The short C fibres were firstly dispersed in solvents with the aid of dispersant and then mixed with SiC slurry to limit fibre breakage. The relative densities, mechanical properties, oxidation behavior of Csf/SiC multilayer …
-
Consolidation of Al-TiO₂ and Ti₃Al-Ai₂O₃ composite powders
Pressureless sintering, hot pressing and sinter-HIP of Ti₃Al-Al₂O₃ and Al-TiO₂ composite powders have been carried out under inert atmospheres. The Al-TiO₂ composite powders were produced by discus milling Al/TiO₂ powder mixtures followed by ball milling. The Ti₃Al-Al₂O₃ composite powders were …
-
Innovative sinter processing of non-oxide CMC materials
… which often require very expensive machining. Pressureless sintering of CMC preforms to near net shape is a preferred alternative, greatly reducing costs and allowing the formation of complex component geometry. However, there are major technical difficulties. Densification by infiltration of …
-
Densification, microstructure, and mechanical properties of zirconium diboride based ultra-high temperature ceramics
… studying the densification of ZrB₂ ceramics by pressureless sintering techniques. Various processes have been applied to coat ZrB₂ powders with polymer precursors, which were used to produce C after charring. After sintering at 1900⁰C, relative density increased of ~70% for uncoated ZrB₂ to >99% …
-
Consolidation of WC-Co nanocomposites synthesised by mechanical alloying
… alloying (MA) milling time, temperature, sintering method and microstructure on the mechanical properties of a tungsten carbide-cobalt (WC-Co) hardmetal, based on 10wt% Co, has been established. The effects of high-energy milling for 30, 60, 180 and 300 min and the interrelation between …
-
LOW TEMPERATURE SILVER PASTE
… despite the advantages, the adoption of silver sintering technology has been limited, primarily due to the harsh conditions required—namely, high temperatures and applied pressures—that can hinder its use in sensitive electronic devices. This thesis explores the development of a pressureless …
-
Reaction processing for the development of ultra-high temperature ceramics
… hot pressing, reactive hot pressing, and pressureless sintering"--Abstract, page iv.
-
Solution-based synthesis and processing of nanocrystalline ZrB₂-based composites
… thesis focuses on the synthesis, processing and sintering of nanocrystalline powders with Zr- and Ta-based diboride/carbide/silicide compositions. A solution-based processing method was developed to prepare reactive mixtures that were precursors for ZrB₂-based powders. The precursors reacted to …
-
Evaluating Processing–Property Relationships in Metallic Alloys and Metal-Ceramic Composites Fabricated with Direct-Write Technique
… the alloys, and processing was carried out using pressureless-solid state sintering. Slurries with different powder particle size distributions were designed to control the interfacial free energies and volume specific surface area, which act as the driving forces for densification in pressureless …
-
Nondestructive Evaluation of Zirconium Phosphate Bonded Silicon Nitride Radomes
… applications in advanced tactical missiles. Pressureless sintering reduces processing costs, but is untried for radome manufacturing. The tendency for catastrophic failure requires that each radome fabricated with this material/method be inspected for defects prior to use. Visible, …
-
Solid-state processing of thermoplastic polymers
Although compaction and sintering of polymeric powders has been investigated since the early 1970's, this processing method is not widely used, possibly because the fundamental mechanisms which control compaction and sintering have never been fully understood. This study has made significant …
-
SYNTHESIS OF HIGHLY DENSE YTTERBIUM-DOPED LUTETIUM AND UNDOPED YTTRIUM OXIDE FOR HIGH POWERED LASING APPLICATIONS
… Yb3+-doped Lu2O3 disks were prepared by pressureless sintering and hot isostatic pressing (HIPing) mixed powder compacts. By selecting optimized sintering soak temperatures/times, HIPed specimens of theoretical density and good transparency were obtained. Discolorations and dispersed …
Page 1 of 3