Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 87 for “"Pressurized water reactors"”.
-
A neutron noise diagnostic methodology for pressurized water reactors
… (PSD) from an ex-core neutron detector in a pressurized water reactor (PWR) and nuclear plant noise data taken under normal operating conditions to quantify the dynamic state of the plant in terms of physically significant parameters and to provide representations of the noise descriptors …
-
Investigations on Neutron Flux Fluctuations in Pressurized Water Reactors
… fluctuations are a natural phenomenon of nuclear reactors. Approximately since 2001, pressurized water reactors built by Kraftwerk Union AG have exhibited an unexplained cycle-by-cycle change of the magnitude of these fluctuations. The change has also drawn attention to long-known but also …
-
Performance monitoring of pressurized water reactors using artificial neural networks
<p>Performance monitoring of a Pressurized Water Reactor (PWR) plant, in general, includes the monitoring and diagnostics of plant systems (both primary and secondary), actuators and instrument channels. The primary goal of operation of a PWR is to maintain as high a thermal power as possible, to …
-
Planning, performing, and interpreting dynamic measurements in pressurized water reactors
<p>Dynamic tests were performed on the Oconee I nuclear power system at 40, 75, and 95 percent of full power. The tests used pseudorandom binary and multifrequency binary perturbation of reactivity. Recordings were made of the resulting output of plant parameters including neutron power, steam …
-
An alternate high pressure injection system for pressurized-water reactors
… to a major rupture in the primary system of a pressurized water reactor (PWR), tests were conducted using the thermal-hydraulic computer code RELAP4/MOD5. The results for the overall plant system show that the maximum core average fuel cladding temperature reached during an intermediate size …
-
A mathematical model of iodine spiking in pressurized water reactors
When a pressurized water reactor is operated for a sufficiently long period of time, a small number of fuel rods will develop ruptures in their claddings. These defects will leak volatile fission products into the primary coolant, including radioactive iodine. During steady-state operation of the …
-
Uncertainty Analysis in Modelling for CANDU and Pressurized Water Reactors
… of nuclear power plants in general, and in CANDU reactors specifically. The work presented in this thesis extends the methodologies for uncertainty propagation established internationally to CANDU plants and pioneers the integration of these tools with important plant features in CANDUs, such as …
-
Axial Xenon Redistribution And Power Shaping In Large Pressurized Water Reactors
… model for axial power shaping studies in pressurized water reactors of the current generation. The model is also intended for numerical studies on: (1) reactor load-follow capability throughout a fuel loading lifetime; and (2) burnup dependence of the reactor stability against axial xenon …
-
Analysis and monitoring of in-core dynamics in pressurized water reactors
… temperature coefficient of reactivity in pressurized water reactors (PWRs) are studied. Three kinds of models are developed to investigate the mechanisms involved in the noise signals: the phenomenological model, the distributed parameter model and the multi-nodal model. The Loss-of-Fluid …
-
Suitability of the Kalina Cycle for Power Conversion from Pressurized Water Reactors
… suitability for thermal power conversion from a pressurized water reactor. Several previous papers have examined this application, but these either lack proof of concept or make unfeasible assumptions. This work expands current knowledge by simulating the Kalina cycle and comparing it to current …
-
Analysis of coolant pressure dynamics in the primary system of pressurized water reactors
… of coolant pressure in the primary loop of a pressurized water reactor (PWR). One of the objectives is to determine the important parameters that influence the standing wave behavior of the pressure noise process. As a consequence of this analysis, certain frequency range of the pressure noise …
-
Implementation of an expert system for xenon spatial control in pressurized water reactors
<p>Most commercial pressurized water reactors are unstable to xenon oscillations that occur during load-follow operation;Control of the axial xenon oscillations is a knowledge- and experience-intensive activity for reactor operators. To aid reactor operators in the control of axial xenon …
-
Knowledge base expert system control of spatial xenon oscillations in pressurized water reactors
… oscillations during the load-follow operation of pressurized water reactors. They are expected to observe the axial offset of the core, and to estimate the correct time and amount of necessary control action based on heuristic rules given in axial offset control strategies;Current control methods …
-
A surveillance strategy for a four year operating cycle in commercial pressurized water reactors
… was applied at an operating Westinghouse Pressurized Water Reactor to demonstrate the viability of a 48 month cycle within the nuclear industry. Of the 3108 regulatory and investment protection surveillances studied, 3054 would likely support an extended full cycle. The framework for …
-
The Simulation and Study of Conditions Leading to Axial Offset Anomaly in Pressurized Water Reactors
Axial offset anomaly (AOA) in pressurized water reactors (PWR) refers to deviation of the measured neutron flux in the top half of the core from the predicted values. Among other difficulties, AOA reduces the shutdown margin, and may force the plant to reduce power output. AOA is believed to be …
-
A new technique for estimating the bulk fluid temperature of stratified flow in pressurized water reactors
<p>In some Westinghouse reactors, the computed hot-leg bulk temperature is being biased by thermal stratification of the core exit flow. The stratification results from large temperature differences between the inner and outer regions of the core exit flow and limited fluid mixing between the core …
-
Study on Advanced In-Core Fuel Management for Pressurized Water Reactors Using Loading Pattern Optimization Methods
本文データは平成22年度国立国会図書館の学位論文(博士)のデジタル化実施により作成された画像ファイルを基にpdf変換したものである
-
Two-phase CFD analyses in fuel assembly sub-channels of Pressurized Water Reactors under swirl conditions
… swirl conditions in sub-channel geometries of pressurized water reactors (PWR) FAs, including a realistic description of the critical heat flux (CHF)-phenomena and identification of two-phase indicators characterizing CHF-phenomena. The numerical simulations were conducted with a 3-D CFD code …
-
An improved method for estimating the moderator temperature coefficient of pressurized water reactors using multivariate autoregression
… temperature coefficient (MTC) of reactivity in pressurized water reactors based on a newly established technique is described. Previous work has correlated stochastic fluctuations in the reactor core-exit temperature with similar fluctuations in the in-core neutron flux. The frequency response …
Page 1 of 5