Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 66 for “"Prestressed bridge"”.

  1. Self-Compacting Concrete for Prestressed Bridge Girders

    … have been hesitant to allow SCC for precast bridge girder applications. This study was initiated with the intent to investigate the viability of using SCC developed at local precast plants with locally available materials for the construction of precast prestressed SCC girders in the State of …

    umn Repository record for Self-Compacting Concrete for Prestressed Bridge Girders (opens in a new tab)

  2. Self-compacting concrete for prestressed bridge girders

    … of its use in the production of precast prestressed concrete bridge girders for the State of Minnesota. Six precast prestressed bridge girders were cast using four SCC and two conventional concrete mixes. Variations in the mixes included cementitious materials (ASTM Type I and III cement …

    umn Repository record for Self-compacting concrete for prestressed bridge girders (opens in a new tab)

  3. CALIBRATION OF PHI FACTORS FOR PRESTRESSED BRIDGE GIRDERS

    … Factor Design (LRFD) format is performed for bridge girders prestressed with Carbon Fiber-Reinforced Polymers (CFRP). The underlying principle of the LRFD design is to achieve a uniform probability of failure (target reliability) for all possible design scenarios, which is achieved through …

    houston Repository record for CALIBRATION OF PHI FACTORS FOR PRESTRESSED BRIDGE GIRDERS (opens in a new tab)

  4. Precast prestressed bridge approach slab : cost effective designs

    Bridge approach slabs (BAS) are transition slabs used to connect the roadway with the bridge. Among the various problems bridge approach slabs experience, differential settlement is the found to be the major cause leading to approach slab distress. The two suggested alternatives are also effective …

    missouri Repository record for Precast prestressed bridge approach slab : cost effective designs (opens in a new tab)

  5. Development of high performance precast/prestressed bridge girders

    Demand continues to increase for bridges with long spans and shallow depths. Due to safety concerns, four-span overpasses are being replaced with two span overpasses to avoid placement of piers near the highway shoulders. In the meantime, the bridge profile is restricted due to existing businesses …

    nebraska Repository record for Development of high performance precast/prestressed bridge girders (opens in a new tab)

  6. Horizontal Shear Connectors for Precast Prestressed Bridge Decks

    … of deteriorated decks as well as for new bridge construction. The horizontal shear strength at the interface between the two interconnected elements is of primary importance in order to provide composite action. The strength of the bond between the two precast members should be high enough …

    vt Repository record for Horizontal Shear Connectors for Precast Prestressed Bridge Decks (opens in a new tab)

  7. Evaluation of high strength concrete prestressed bridge girder design

    … study focuses on evaluating the design of HSC prestressed bridge girders. Specifically there were three major objectives. First, to determine the current state of practice for the design of HSC prestressed bridge girders. Second, to evaluate the controlling limit states for the design of HSC …

    tamu Repository record for Evaluation of high strength concrete prestressed bridge girder design (opens in a new tab)

  8. Evaluation of high strength lightweight concrete precast, prestressed bridge girders

    … of High Strength Lightweight Concrete (HSLW) in bridge girders for the I-85 Ramp "B" Bridge crossing SR-34 in Cowetta County, Georgia. This bridge consisted of four spans; all girders were constructed using lightweight expanded slate aggregate. Spans 2 and 3 had a design strength of 10,000 psi, …

    gatech Repository record for Evaluation of high strength lightweight concrete precast, prestressed bridge girders (opens in a new tab)

  9. Shear Behavior and Design of High Strength Concrete Prestressed Bridge Girders

    A simple semi-empirical set of equations was developed at the University of Houston (UH) to predict the shear strength of PC I-girders with normal-strength concrete. The UH-developed equation is a function of concrete strength, web area, shear span to effective depth ratio, and percentage of …

    houston Repository record for Shear Behavior and Design of High Strength Concrete Prestressed Bridge Girders (opens in a new tab)

  10. High performance concrete in Oklahoma designed for precast/prestressed bridge beams.

    … cements and aggregates are better in precast/prestressed concrete applications. Cement selection is crucial to early strength gain while the choice of coarse aggregate is more important for ultimate strength development. The w/cm is a useful statistics for today's increasingly complex HPC …

    oklahoma-thes Repository record for High performance concrete in Oklahoma designed for precast/prestressed bridge beams. (opens in a new tab)

  11. A Compilation of Research on Self-Consolidating Concrete for Prestressed Bridge Girders

    … can be utilized to improve fabrication of prestressed girders. SCC has been used in the precast industry with a satisfactory performance. This was achieved by reducing fabrication time, decreasing health hazards due to excessive noise, and a much better finishing on the surface of the …

    sdstate Repository record for A Compilation of Research on Self-Consolidating Concrete for Prestressed Bridge Girders (opens in a new tab)

  12. Development and Implementation of Ultra-High Performance Concrete for Prestressed Bridge Girder Applications

    … ultra-high performance concrete (UHPC) in Texas bridges has the potential to add substantial improvements to bridge construction. Advanced material properties and superior durability of UHPC can result in significant design and construction benefits. Within this context, this research evaluated …

    tamu Repository record for Development and Implementation of Ultra-High Performance Concrete for Prestressed Bridge Girder Applications (opens in a new tab)

  13. Calcium Sulfoaluminate Cement Concrete for Prestressed Bridge Girders: Prestressing Losses, Bond, and Strength Behavior

    … sulfoaluminate (CSA) cement was used to cast a prestressed voided deck slab bridge girder. The rapid-set properties of CSA cement allowed the initial concrete strength to reach the required 4300 psi needed in order to cut the prestressing strands 6.5 hours after casting. Prestress losses were …

    utahstate Repository record for Calcium Sulfoaluminate Cement Concrete for Prestressed Bridge Girders: Prestressing Losses, Bond, and Strength Behavior (opens in a new tab)

  14. Repair of Impact-Damaged Prestressed Bridge Girders Using Strand Splices and Fiber-Reinforced Polymer

    … focusing on repair techniques for impact damaged prestressed bridge girders. The investigation included evaluation of the repair installation and flexural strength of four AASHTO Type III girders that were intentionally damaged and repaired. In addition, nonlinear finite element modeling was used …

    vt Repository record for Repair of Impact-Damaged Prestressed Bridge Girders Using Strand Splices and Fiber-Reinforced Polymer (opens in a new tab)

  15. Experimental Investigations of Residual Strength and Repaired Strength of Corrosion Damaged Prestressed Bridge Beams

    … durability of infrastructure components, such as prestressed concrete bridge beams, can be significantly affected by long-term deterioration associated with corrosion. Corrosion is a major concern for bridges in Virginia, due to the frequent use of deicing salts during the winter, as well as the …

    vt Repository record for Experimental Investigations of Residual Strength and Repaired Strength of Corrosion Damaged Prestressed Bridge Beams (opens in a new tab)

  16. Shear transfer between precast prestressed bridge beams and in-situ concrete crosshead in continuous structures

    … made to study the shear transfer between precast prestressed beams and in-situ concrete in a relatively new method of construction of continuous bridge decks where the ends of precast beams are connected to an integral in-situ crosshead away from the supports. Two series of tests were carried out. …

    whiterose Download PDF for Shear transfer between precast prestressed bridge beams and in-situ concrete crosshead in continuous structures (opens in a new tab)

  17. Repair of Impact-Damaged Prestressed Bridge Girders Using Strand Splices and Fabric Reinforced Cementitious Matrix

    … thesis investigates the repair of impact-damaged prestressed concrete bridge girders with strand splices and fabric-reinforced cementitious matrix systems, specifically for repair of structural damage to the underside of an overpass bridge girder due to an overheight vehicle collision. Collision …

    vt Repository record for Repair of Impact-Damaged Prestressed Bridge Girders Using Strand Splices and Fabric Reinforced Cementitious Matrix (opens in a new tab)

  18. A Systematic Investigation of Shear Connections Between Full-Depth Precast Panels and Precast Prestressed Bridge Girders

    Full-depth precast panels are used in concrete bridges to provide several benefits such as faster construction, lower cost and reduced constructional hazard. However, one construction drawback is that connectors are required to transmit horizontal shear across the interface between the girder and …

    tamu Repository record for A Systematic Investigation of Shear Connections Between Full-Depth Precast Panels and Precast Prestressed Bridge Girders (opens in a new tab)

  19. Creep and Shrinkage of High Performance Concrete, and Prediction of Long-Term Camber of Prestressed Bridge Girders

    <p>The long-term camber of prestressed bridge girders is typically over-estimated by current Iowa Department of Transportation (IA DOT) methods at erection (typically 3 month after production of girders), especially for long-span bulb tee girders. This often leads to increased costs due to the …

    iastate Repository record for Creep and Shrinkage of High Performance Concrete, and Prediction of Long-Term Camber of Prestressed Bridge Girders (opens in a new tab)

  20. Longitudinal Crack Analysis in Concrete Prestressed Girders: Justification and Implementation

    … the integrity of a composite deck pretensioned/prestressed bridge girder after horizontal cracks were discovered at the web-flange interface. This study was accomplished by installing strain gages on an AASHTO Type III girder, obtaining variable loading values, and analyzing the results. Results …

    sdstate Repository record for Longitudinal Crack Analysis in Concrete Prestressed Girders: Justification and Implementation (opens in a new tab)

Page 1 of 4