Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"Primary breakup"”.
-
Numerical study of primary breakup of liquid sheets
The primary breakup of liquid sheets into ligaments has a great effect on the size, velocity, and penetration of the droplets produced further by the disintegration of ligaments. The generated ligaments can be categorized in two general types based on their orientation with respect to the flow …
-
A turbulence-based model for the primary breakup of pressure atomized liquid jets
<p>The primary objective of this study was to investigate and validate a predictive, turbulence based primary breakup model. The ESE model is based on a modeled evolution of the turbulent energy spectrum, and is sufficiently general that it may be applied to a broad range of pressure-atomized spray …
-
An experimental study of the primary breakup of a liquid jet in a turbulent low speed crossflow
… of turbulence of a low speed crossflow on the primary breakup, trajectory and breakup location of a transversely injected liquid jet was experimentally investigated in this thesis. Turbulent flow field was generated by means of axial fans inside a spherical chamber. Turbulence intensity was …
-
Development of spectral microscopy imaging technique for time-resolved imaging of primary breakup in high-pressure fuel sprays
The primary breakup of high-pressure sprays has been a topic of study for several decades, and while several theoretical models have been proposed to describe this process, the exact mechanisms remain unknown. To verify proposed theories, high-resolution visualization of breakup phenomena is …
-
Breakup characteristics of a liquid jet in subsonic crossflow
… describes an experimental investigation of the breakup processes involved in the formation of a spray created by a liquid jet injected into a gaseous crossflow. This work is motivated by the utilization of this method to inject fuel in combustors and afterburners of airplane engines. This study …
-
Large Eddy Simulation of Atomizing Sprays
… method. The development of liquid sprays, the breakup into smaller droplets, the evaporation and mixing with the surrounding gas is simulated using the Lagrangian Particle Tracking (LPT) method. This thesis focuses a) on improving the understanding of the underlying physics and b) improving the …
-
Spray generation from free and half-free jets
… to 7,500. The positions of the transition and primary breakup as well as the characteristics of the ligament forest and droplets were determined from the digitized images and interpreted in terms of the characteristics of the turbulent boundary layer and a phenomenological model based on our …
-
Experimental Investigation Of Breakup And Coalescence Characteristics Of A Hollow Cone Swirling Spray
… spray dynamics, such as spray formation, liquid breakup length, droplet breakup regimes, and coalescence still need to be understood for a pressure-swirl nozzle. An experimental study of the breakup characteristics of various liquids and fuels with different thermal physical properties emanating …
-
Experimental study on diesel spray with single and multiple injection under room temperature and low temperature
… and a CCD camera were then employed to study the primary breakup. The regime for the mushroom spray head was analyzed and the dispersion quality was quantified. The breakup-regime study was carried out. Flow regimes in nozzle dominate the breakup. Dwell interval, injection pressure, the number of …
-
Evaluation Of Nozzle Geometry On High Pressure Gasoline Direct Injection Spray Atomization
… influence on spray plume targeting and jet primary breakup characteristics. A comparison of the simulation results with near-field shadowgraph and Mie scatter imaging as well as phase-contrast x-ray imaging is provided. When near-field experimental imaging validated the simulation results …
-
Detailed Viscosity in Glycol Blends for Improved Spray Velocity Measurements- Detailed Density, Surface Tension and Viscosity at 20°C
… comparisons of this work directly support the primary breakup studies of the spray group at Combustion and studies of pulsating and constrained flows at Fluid Dynamics.
-
Pulse sliced picosecond ballistic imaging and two planar elastic scattering: development of the techniques and their application to diesel sprays
… the distance scales typical encountered in the primary breakup regions of diesel sprays. Results indicate that the system performance improved via the use of two wavelengths. A final investigation was undertaken to image coherent light which has elastically scattered orthogonal to the direction …
-
Spray and Fuel-Air Characteristics of Advanced Co-Optima Biofuels
… Aerodynamic Weber Number for the neat fuels. The breakup length extracted from the tip penetration was inversely related to the Aerodynamic Weber Number. Blend characterization revealed a dampening effect on the spray cone angle compared to the neat fuel, and the breakup lengths were coupled to …
-
Quantitative analysis of a canonical coaxial two-fluid spray based on X-ray imaging techniques
… makes it hard to theoretically formalize the breakup process; therefore, the accumulation of a large amount of experimental data is needed to study spray mechanisms. Primary breakup is the process during which a continuous liquid jet breaks up into ligaments and droplets. It is the initial …
-
Biodiesel Spray Characterization: A Combined Numerical and Experimental Analysis
… size distribution, spatial flux distribution and breakup study of biodiesel, diesel and their blends. Both experimental and numerical analyses have been performed to shed more light on the physics of atomization of liquid jets in cross flow. In the experimental part, shadowgraph technique and …
-
Characterization and Control of Electrostatically Assisted Two-Fluid Coaxial Atomization
… The effects of electrostatic forcing in the primary atomization, the resulting droplet population and the transport in the turbulent spray are studied over a wide range of gas-to-liquid momentum ratios, gas swirl ratios and electric field strengths. Based on the fundamental understanding of …
-
Investigation of atomization mechanisms and flame structure of a twin-fluid injector for different liquid fuels
… illustrates mostly fine droplets indicating that primary breakup by FB atomization occurs within the injector. Few larger droplets appearing at the injector periphery undergo secondary breakup by Rayleigh-Taylor instabilities. Time-resolved PIV technique is applied to quantify the droplet dynamics …
-
Advanced simulation and modeling of turbulent sprays
… numerical simulations (DNS) to investigate the primary breakup in such flows. DNS is accurate but requires extensive computational resources. In comparison, large eddy simulation (LES) is more practical, resolving only the large-scale flow structures and modeling the small-scale effects. The …
-
Advancing turbulent spray and combustion models for compression ignition engine simulations
… In this context, a new attempt of hybrid spray primary breakup modeling is presented and demonstrated in successful application aimed at LTC technique. In addition, the Representative Interactive Flamelets (RIF) model with aid of multi-flamelets approach is extensively assessed in terms of …
-
Development of a 20-moment Polydisperse and Polykinetic Spray Model Coupled With a Surface Density Approach for the Modelling of the Dense and Disperse Liquid Spray Regimes
… model is used for modelling of the primary atomization of the liquid jet/sheet in the dense spray regime while the 20-moment Anisotropic Gaussian (AG) moment closure modelling approach is used for the disperse spray regime. Current state-of-art primary atomization modelling …
Page 1 of 2