Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 28 for “"Print Orientation"”.

  1. Effect of Composition and Print Orientation on Thermal Conductivity of 3d Printed Composites

    … Fused Deposition Modeling (FDM) is a type of 3D printing where molten thermoplastic is extruded layer by layer to create parts. There is an increasing need for improvement and diversification of material properties to further extend the use of AM parts. AM parts have not been commonly used in …

    sdstate Repository record for Effect of Composition and Print Orientation on Thermal Conductivity of 3d Printed Composites (opens in a new tab)

  2. Concurrent Optimization of Print Orientation, Stacking Sequence, and Topology for Fiber Reinforced Additively Manufactured Components

    … numerical optimization methods including fiber orientation optimization and topology optimization. Many existing methods already optimize fiber reinforcement orientation, however, constrain fiber reinforcement to exist within a user-defined FRAM print-plane(s). This style of problem formulation …

    queens Repository record for Concurrent Optimization of Print Orientation, Stacking Sequence, and Topology for Fiber Reinforced Additively Manufactured Components (opens in a new tab)

  3. Effect of Print Orientation, Storage Conditions, and Time on the Intaglio Surface Accuracy of Additively Manufactured Implant Surgical Guides

    … impact the pre-planned implant position. How the print orientation and storage time and conditions influence manufacturing accuracy remains uncertain. Purpose. The purpose of the present in vitro study was to evaluate the influence of the print orientation, storage time, and storage conditions on …

    tamu Repository record for Effect of Print Orientation, Storage Conditions, and Time on the Intaglio Surface Accuracy of Additively Manufactured Implant Surgical Guides (opens in a new tab)

  4. Study of layer orientation on the fracture behavior of two additively manufactured thermoset resins, A

    … range of applications. Specifically, the role of print orientation on the quasi-static and dynamic fracture response of two distinct AM polymer materials, DA-3 and PM-EM828, is presented. While predictive simulations often leverage quasi-static fracture criterion, impulsively loaded cracks can …

    colo-mines Repository record for Study of layer orientation on the fracture behavior of two additively manufactured thermoset resins, A (opens in a new tab)

  5. Effect of Different Print Orientations on the Flexural Strength of 3D Printed Denture Base Resin

    … has recently made it possible to fabricate 3D printed complete dentures; however, there is limited data evaluating the flexural strength of 3D printed denture base resins and the effect of print orientation on flexural strength. Purpose. The purpose of this in vitro study was to evaluate the …

    tamu Repository record for Effect of Different Print Orientations on the Flexural Strength of 3D Printed Denture Base Resin (opens in a new tab)

  6. Dielectric performance of fused filament fabricated ULTEM 9085 for naval radome application

    … The first part reviews existing research on how printing parameters such as nozzle temperature, chamber temperature, print speed, infill, and layer height affect the mechanical performance of FFF ULTEM 9085. Data from the manufacturer of commonly used ULTEM 9085 filament, Stratasys, has shown …

    unf Repository record for Dielectric performance of fused filament fabricated ULTEM 9085 for naval radome application (opens in a new tab) Download PDF for Dielectric performance of fused filament fabricated ULTEM 9085 for naval radome application (opens in a new tab)

  7. Additive Manufacturing of Short-Fiber Composites via Stereolithography

    … were developed that resulted in successful printing and curing of composites at a 5% fiber volume. The effects of layer height and print orientation of the short-fiber composites were evaluated for their effect on the material properties. There was no increase in the flexural modulus or …

    ndsu Repository record for Additive Manufacturing of Short-Fiber Composites via Stereolithography (opens in a new tab)

  8. The Effect of Print Parameters on Permeability and Surface Roughness of 3D Printed Sand Cores and Resulting Castings

    … a modified 3D selective powder deposition sand printer to print cores using shell sand. The cores were adjusted on the printer by the print factors: object layer thickness, fine track overlap distance, and fat track rarity. Each factor had an upper and lower value, with a midpoint to detect …

    texas-state Repository record for The Effect of Print Parameters on Permeability and Surface Roughness of 3D Printed Sand Cores and Resulting Castings (opens in a new tab)

  9. IDENTIFYING FAILURE BEHAVIORS IN STEREOLITHOGRAPHY FROM VARIED PRINT ORIENTATIONS

    … create three-dimensional shapes by strategically printing layers of material. Printing parameters such as layer orientation, print resolution and post cure can affect a specimen’s homogeneity, longevity and mechanical characteristics. Because of this variability, print parameters must be carefully …

    rowan Repository record for IDENTIFYING FAILURE BEHAVIORS IN STEREOLITHOGRAPHY FROM VARIED PRINT ORIENTATIONS (opens in a new tab)

  10. Non-Destructive Evaluation of Functional Material Properties Performed on Additively Manufactured Coupons

    … (MFT), the functional bulk properties of an as-printed component can be accurately characterized and the anisotropies inherent to AM can be quantified. Tests were performed using laser Doppler vibrometry and coupled with finite element analysis to show the ability to determine the functional …

    unm Repository record for Non-Destructive Evaluation of Functional Material Properties Performed on Additively Manufactured Coupons (opens in a new tab)

  11. Microfluidic diagnostics from continuous liquid interface production additive manufacturing

    … repeatability but with somewhat lower accuracy. Print orientation significantly affects the accuracy and repeatability of the process, and the best accuracy is achieved when the microchannels are parallel to the direction of motion of the build tray. We demonstrate manufacturing, assembly and …

    uiuc Repository record for Microfluidic diagnostics from continuous liquid interface production additive manufacturing (opens in a new tab)

  12. Styrkan av 3D-utskrivna kompositer

    … agile prototyping and for people that 3D-print at home. The scope of 3D printing is not just for rapid prototyping anymore, but also for end products. This has put a higher demand on materials and material data for end user products. This study follows the work done on testing and …

    chalmers Repository record for Styrkan av 3D-utskrivna kompositer (opens in a new tab)

  13. Additive Manufacturing of Commercial Polypropylene Grades of Similar Molecular Weight and Molecular Weight Distribution

    … with other materials to improve the printability has been investigated, variation in properties of commercial PP grades, of similar molecular weight (MW) and molecular weight distribution (MWD), on printability is still to be investigated. Those commercial PP grades can have wide …

    vt Repository record for Additive Manufacturing of Commercial Polypropylene Grades of Similar Molecular Weight and Molecular Weight Distribution (opens in a new tab)

  14. A Study of Fused Deposition Modeling (FDM) 3-D Printing Using Mechanical Testing and Thermography

    … the FDM process in-situ. The nozzle temperature, print speed and print orientation were adjusted during the fabrication process of each specimen. Experimental and numerical analysis were performed on the fabricated specimens. The combination of the layer wise temperature profile plot and temporal …

    iupui Repository record for A Study of Fused Deposition Modeling (FDM) 3-D Printing Using Mechanical Testing and Thermography (opens in a new tab)

  15. Tomographic flow measurements over additively manufactured roughness with particle tracking velocimetry.

    … roughness element size depending on surface print orientation. Understanding how this affects airflow through micro-cooling channels is essential for component design. Individual roughness elements may block up to 15% of a cooling channel. The fluid responses to this level of roughness are …

    baylor Repository record for Tomographic flow measurements over additively manufactured roughness with particle tracking velocimetry. (opens in a new tab) Embargoed until 2029-12-15

  16. Development of a composite combat helmet using structural metamaterials

    … with the mechanical characterisation of 3D-printed nylon, with and without short carbon fibre reinforcement. The effects of print orientation, infill pattern, and strain rate on these materials' tensile and compressive properties are analysed. Findings show significant improvements in …

    qu-belfast Repository record for Development of a composite combat helmet using structural metamaterials (opens in a new tab) Download PDF for Development of a composite combat helmet using structural metamaterials (opens in a new tab)

  17. Experimental Investigation and Modeling of PolyJet and Binder Jetting Additive Manufacturing Processes

    … aspect is to compensate color deviations of printed samples from color specifications entered in the printer software using a data-driven approach. In the first two chapters of the dissertation, the effects of PolyJet process parameters (such as surface finish type, print orientation, and …

    tamu Repository record for Experimental Investigation and Modeling of PolyJet and Binder Jetting Additive Manufacturing Processes (opens in a new tab)

  18. Design for additive manufacturing of flexible lattice structures : A simulation driven design approach

    … lattice sizeand geometry, strut thickness & orientation, print orientation, and manufacturingdeviations, while quantifying their effects, for instance, variations in as-printedmaterials’ stiffness due to strut orientation changes. It develops and refines finiteelement-based numerical models …

    lund Repository record for Design for additive manufacturing of flexible lattice structures : A simulation driven design approach (opens in a new tab) Download PDF for Design for additive manufacturing of flexible lattice structures : A simulation driven design approach (opens in a new tab)

  19. 3D Printing with Photopolymerizable Polyester Resins for Resorbable Medical Device Applications

    … in the use of additive manufacturing (AM or “3D printing”) with subsequent improvement in clinical outcomes.As an exceptional AM technology, vat-photopolymerization (VP), often called stereolithography, can create complex structures and has thus been adopted for a range of biomedical applications …

    clemson Repository record for 3D Printing with Photopolymerizable Polyester Resins for Resorbable Medical Device Applications (opens in a new tab)

Page 1 of 2