Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 40 for “"Print speed"”.

  1. Developing additive manufacturing methodology towards the in situ repair of articular cartilage defects

    … 3D optical scanning, alignment of conformal prints, toolpath development for in situ additive manufacture of surface additions and filling of surface defects, and in situ additive manufacture of PLA constructs onto ’known’ and ’unknown’ surfaces. Investigation of the 3D scanning parameters …

    birmingham Download PDF for Developing additive manufacturing methodology towards the in situ repair of articular cartilage defects (opens in a new tab)

  2. Investigating the Effect of Printing Parameters and Green-Sintered Relationship in Metal Fused Filament Fabrication Additive Manufacturing Technology Using Bronze

    … as compared to plastics. The process involves printing parts with the metal filament, consisting of metal particles and binder, then removing the binder and fusing metal particles to densify the parts. This research used a two-step thermal process: debinding, to remove the binder, and …

    tamu Repository record for Investigating the Effect of Printing Parameters and Green-Sintered Relationship in Metal Fused Filament Fabrication Additive Manufacturing Technology Using Bronze (opens in a new tab)

  3. Assessing Vibration Defects in Large-Scale Fused Deposition Modeling with Open Hardware Test Bed and Input Shaping

    … However, most research targets small-format FDM printers, which are limited by the size of their build volume. The potential of large-format FDM systems isn’t fully realized due to the challenges associated with scaling up the build volume. Print speed is a key barrier to realizing full-scale …

    buffalo Repository record for Assessing Vibration Defects in Large-Scale Fused Deposition Modeling with Open Hardware Test Bed and Input Shaping (opens in a new tab)

  4. Mechanical Properties Evaluation of 3D Printed PETG and PCTG Polymers

    3D printing is also known as additive manufacturing (AM) which has become a popular manufacturing trend over the years. Due to its unique advantages of fast production rate, ability to create complex geometrical features, toolless manufacturing and many more attracts various industries from …

    sdstate Repository record for Mechanical Properties Evaluation of 3D Printed PETG and PCTG Polymers (opens in a new tab)

  5. A Systems Approach to the Design of a Two Dimensional Cell Printer

    … in the early stages of this research. Bioprinting is an important research area that has the potential to accurately position cells and biological materials for tissue engineering. This paper describes the attempt to obtain micrometer accuracy in the placement of cells using a systems …

    clemson Repository record for A Systems Approach to the Design of a Two Dimensional Cell Printer (opens in a new tab)

  6. 3D Silicone Whipping Additive Manufacturing (SWAM): Technology, Applications, and Research Needs.

    … a device similar to a traditional filament 3D printer, but it deploys a paste supplied by a pump instead of feeding a thermoplastic filament through a heated nozzle. There are many parameters that are common to both technologies, but the role of several variables is still not described or …

    waterloo Repository record for 3D Silicone Whipping Additive Manufacturing (SWAM): Technology, Applications, and Research Needs. (opens in a new tab)

  7. 3D Printing-Based Manufacturing Method for Biomass-Fungi Composites

    … manufacture biomass-fungi composite products. 3D printing of these composites would facilitate greater design flexibility for various construction and packaging applications. This dissertation presents a novel 3D printing process for the manufacturing of products using these composites. It …

    tamu Repository record for 3D Printing-Based Manufacturing Method for Biomass-Fungi Composites (opens in a new tab)

  8. Optimization of Direct Ink Writing Process for Porous Ceramic Materials

    … of conventional manufacturing methods such as speed of production, cost of production, and its inflexibility due to the simplicity of direct ink writing. This thesis presents a study on the process parameters of the direct ink writing technique like print speed, print flow, nozzle diameter, and …

    buffalo Repository record for Optimization of Direct Ink Writing Process for Porous Ceramic Materials (opens in a new tab)

  9. Development of Extracellular Matrix-Based Colloidal Inks for Cartilage Tissue Engineering

    … of bioinks that balance biological relevance and printability limits its potential. Decellularized extracellular matrix retains native biochemical cues but suffers from poor mechanical stability, restricting its use in 3D printing. This work presents the development of composite colloidal inks …

    rice Repository record for Development of Extracellular Matrix-Based Colloidal Inks for Cartilage Tissue Engineering (opens in a new tab)

  10. EVALUATION OF A ROTATING PRINTER HEAD FOR ADDITIVE MANUFACTURING AT VARIABLE RESOLUTION

    … methods typically require a trade-off between print resolution and mass deposition rates due to a set nozzle size. This requires longer build times for large, highly detailed parts and it would be beneficial to be able to change the resolution on the fly for naval applications. Having a print …

    nps Repository record for EVALUATION OF A ROTATING PRINTER HEAD FOR ADDITIVE MANUFACTURING AT VARIABLE RESOLUTION (opens in a new tab)

  11. Experimental Evaluation of Rectangular Slot Nozzle on Print Performance in Fused Filament Fabrication Additive Manufacturing Technology Using PLA

    … and rapidly growing AM technology. But printed parts often have voids due to partial neck growth and the geometry of the deposited bead. Several studies done in the past have tackled this problem by optimizing the printing parameters, other studies minimized voids through hardware …

    tamu Repository record for Experimental Evaluation of Rectangular Slot Nozzle on Print Performance in Fused Filament Fabrication Additive Manufacturing Technology Using PLA (opens in a new tab) Embargoed until 2027-12-01

  12. Experimental Evaluation of Rectangular Slot Nozzle on Print Performance in Fused Filament Fabrication Additive Manufacturing Technology Using PLA

    … and rapidly growing AM technology. But printed parts often have voids due to partial neck growth and the geometry of the deposited bead. Several studies done in the past have tackled this problem by optimizing the printing parameters, other studies minimized voids through hardware …

    tamu Repository record for Experimental Evaluation of Rectangular Slot Nozzle on Print Performance in Fused Filament Fabrication Additive Manufacturing Technology Using PLA (opens in a new tab) Embargoed until 2027-12-01

  13. Experimental Evaluation of Rectangular Slot Nozzle on Print Performance in Fused Filament Fabrication Additive Manufacturing Technology Using PLA

    … and rapidly growing AM technology. But printed parts often have voids due to partial neck growth and the geometry of the deposited bead. Several studies done in the past have tackled this problem by optimizing the printing parameters, other studies minimized voids through hardware …

    tamu Repository record for Experimental Evaluation of Rectangular Slot Nozzle on Print Performance in Fused Filament Fabrication Additive Manufacturing Technology Using PLA (opens in a new tab) Embargoed until 2027-12-01

  14. Experimental Evaluation of Rectangular Slot Nozzle on Print Performance in Fused Filament Fabrication Additive Manufacturing Technology Using PLA

    … and rapidly growing AM technology. But printed parts often have voids due to partial neck growth and the geometry of the deposited bead. Several studies done in the past have tackled this problem by optimizing the printing parameters, other studies minimized voids through hardware …

    tamu Repository record for Experimental Evaluation of Rectangular Slot Nozzle on Print Performance in Fused Filament Fabrication Additive Manufacturing Technology Using PLA (opens in a new tab) Embargoed until 2027-12-01

  15. Surface Quality Enhancement of 3D Printed Parts via Simultaneous Coating and Bonding

    … geometries; however, the tradeoff between printing speed and part quality due to the stair-stepping effect remains a key limitation, particularly on inclined or contoured surfaces. This study explores a hybrid post-processing strategy that combines simultaneous coating and bonding …

    buffalo Repository record for Surface Quality Enhancement of 3D Printed Parts via Simultaneous Coating and Bonding (opens in a new tab)

  16. Experimental and Machine Learning Approaches to Comprehending Surface Characteristics and Mechanical Properties of Direct Metal Laser Sintering-Hybrid Milling Manufactured Maraging Steel

    … is an additive manufacturing method where 3D printing of metal parts is conducted layer by layer from metallic powders. DMLS-hybrid milling is a new addition to additive manufacturing methods. The synergistic approach of additive and subtractive manufacturing methods offers benefits from both …

    umn Repository record for Experimental and Machine Learning Approaches to Comprehending Surface Characteristics and Mechanical Properties of Direct Metal Laser Sintering-Hybrid Milling Manufactured Maraging Steel (opens in a new tab)

  17. Multimaterial, Core-Shell Direct Ink Writing of Flexible Strain Sensors for Pneumatically-Actuated Soft Robotic Hinge Joints

    … an expansive material library and the ability to print multiple materials with tailored functionalities in a controllable and single-step process. Particularly beneficial is the net shape printing under ambient conditions of a wide range of materials normally incompatible with one another. Coaxial …

    wvu Repository record for Multimaterial, Core-Shell Direct Ink Writing of Flexible Strain Sensors for Pneumatically-Actuated Soft Robotic Hinge Joints (opens in a new tab)

  18. A Study of Fused Deposition Modeling (FDM) 3-D Printing Using Mechanical Testing and Thermography

    … the FDM process in-situ. The nozzle temperature, print speed and print orientation were adjusted during the fabrication process of each specimen. Experimental and numerical analysis were performed on the fabricated specimens. The combination of the layer wise temperature profile plot and temporal …

    iupui Repository record for A Study of Fused Deposition Modeling (FDM) 3-D Printing Using Mechanical Testing and Thermography (opens in a new tab)

  19. A Hybrid Data-Driven Methodology to Determine Additive Manufacturing Process Parameters

    … or machine parameters, including extrusion speed, extrusion nozzle temperature, layer thickness, and print speed. Due to the complex physical phenomena of FDM resulting in interactions among the material and processing parameters, efficiently predicting the parameters required to achieve …

    buffalo Repository record for A Hybrid Data-Driven Methodology to Determine Additive Manufacturing Process Parameters (opens in a new tab)

  20. Optimized 3D-printing of Carbon Fiber-Reinforced Polyether-ether-ketone (CFR-PEEK) for Use in Overmolded Lattice Composite

    … to metallic implants. The ability to 3D print carbon fiber-reinforced PEEK (CFR-PEEK) components with the relatively cheap fused filament fabrication (FFF) process furthers the favorability of this polymer. By incorporating the stronger CFR-PEEK as a reinforcing lattice structure, the …

    ut-knoxville Repository record for Optimized 3D-printing of Carbon Fiber-Reinforced Polyether-ether-ketone (CFR-PEEK) for Use in Overmolded Lattice Composite (opens in a new tab)

Page 1 of 2