Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"Printed Sensor"”.

  1. A novel portable oxidation-reduction potential and microbial fuel cell-based sensor to monitor microbial growth

    … about microbial activity in the soil. Biosensors can use the signals sent by microorganisms to quantify and analyze microbial activity. Therefore, combining biosensors with bioremediation can enhance the application of bioremediation technology. This thesis focused on designing and …

    sask Repository record for A novel portable oxidation-reduction potential and microbial fuel cell-based sensor to monitor microbial growth (opens in a new tab)

  2. Towards cheap, portable and reliable OFET-based biochemical sensors

    … devices to enzymatic, immunological, and genetic sensors. In this field, largely driven by the demand for low-cost, disposable devices suitable for large-scale screening purposes, various OTFT architectures such as electrolyte-gated organic field-effect transistors (EGOFETs), organic …

    cagliari Repository record for Towards cheap, portable and reliable OFET-based biochemical sensors (opens in a new tab)

  3. A Low-Cost Planar Inkjet-Printed Carbon Nanotube Field Effect Transistor For Sensor And Circuit Applications

    … components, computing applications, and sensors. However, the fabrication of this primary electronic element is complex and costly, especially when considering flexible electronics for bio-sensing applications. This thesis work proposes a new circuit manufacturing technique to print …

    uab Repository record for A Low-Cost Planar Inkjet-Printed Carbon Nanotube Field Effect Transistor For Sensor And Circuit Applications (opens in a new tab)

  4. Micro-Additive Manufacturing of Metal-Oxide-Semiconductor Based Gas Sensors for Diabetes Detection via Breath Analysis

    … for aerosol jet printing is fabrication of sensors including gas sensors. Diabetes is a chronic disease which needs continuous monitoring of blood glucose level. Breath acetone analysis is a potential non-invasive technique to monitor blood glucose level without pricking the finger with a …

    waterloo Repository record for Micro-Additive Manufacturing of Metal-Oxide-Semiconductor Based Gas Sensors for Diabetes Detection via Breath Analysis (opens in a new tab)

  5. Κατασκευή και εφαρμογές τρισδιάστατων εκτυπωμένων διατάξεων για ηλεκτροανάλυση

    … The devices are composed of a micro-cell (printed from non-conductive filament) with integrated 3 electrodes printed by conductive filament and manufactured by a single-step printing process using a dual extruder 3D printer. The 3D printed devices were applied to the electrochemical …

    greece Repository record for Κατασκευή και εφαρμογές τρισδιάστατων εκτυπωμένων διατάξεων για ηλεκτροανάλυση (opens in a new tab)

  6. Development of an in-dressing wound infection sensor

    … the development of an in-dressingelectrochemical sensor that can detect wound infection in real time was advanced. Different screen-printed sensor materials were explored with the aim of determining the most suitable for rapid bacterial detection. The Ag/AgCl sensors studied were unsuitable: both …

    strathclyde Repository record for Development of an in-dressing wound infection sensor (opens in a new tab)

  7. Study of spinel oxide alloys Mn3O4 based for printed temperature sensors

    … of which can be achieved with corresponding sensors. Among the various types existing, negative temperature coefficient (NTC) thermistors, made by spinel oxides, hold a prominent position, due to the wide range they cover. The need for surfaces that can accurately monitor spatial and temporal …

    greece Repository record for Study of spinel oxide alloys Mn3O4 based for printed temperature sensors (opens in a new tab)

  8. Simplifying Sensor Systems: The Rugged, Accessible, and Printed Future of Electroanalytical Monitoring

    Low-cost sensor arrays are required to allow for real-time, in-situ electrochemical monitoring using Internet-of-Things (IoT) systems; however, they are currently not practical due to a lack of stable, mass-producible reference electrodes. To solve this problem, in this thesis a screen-printed …

    unsw Repository record for Simplifying Sensor Systems: The Rugged, Accessible, and Printed Future of Electroanalytical Monitoring (opens in a new tab)

  9. Spausdintų aukso elektrodų taikymas sunkiųjų metalų nustatymui ciklinės voltamperometrijos būdu /

    … DIANA KAUŠPĖDIENĖ Application of Screen-Printed Gold Electrodes for Heavy Metals Detection by Means of Cyclic Voltammetry The present paper describes the application of a gold-based screen-printed sensor to individual and simultaneous detection of heavy metals (copper, lead, tin and zinc) …

    vilnius Repository record for Spausdintų aukso elektrodų taikymas sunkiųjų metalų nustatymui ciklinės voltamperometrijos būdu / (opens in a new tab)

  10. Printed Electronics: Oxide/Organic Composite Thin-Film Transistors, and Electrochemical Sweat Sensors

    … gaps in existing knowledge pose challenges for printed electronics technology. There is a lack of well performing printable materials for oxide thin-film transistor (TFT) contact electrodes. Printed In2O3 TFTs have poor optoelectronic response to frequencies lower than blue light. Scalable …

    aalto Repository record for Printed Electronics: Oxide/Organic Composite Thin-Film Transistors, and Electrochemical Sweat Sensors (opens in a new tab)

  11. Towards Real-Time Predictive Health Monitoring from Sweat Wearables

    … field-effect transistors (ISFETs). While these sensors are sensitive, lightweight, and cost-effective, they are prone to sensor drift. Previous work shows that DNNs are promising for predicting ionic concentration from ISFET sensor readings with the presence of sensor drift. However, training …

    zurich

  12. The Development of a MWCNT-DAO Biosensor for the Detection of Cadaverine in the Assessment of Periodontal Disease

    … disease. Thus, the development of a real-time biosensor, providing point-of-care information regarding the metabolite status of the oral cavity would be of significant impact for oral disease diagnostics. This thesis reports the development and testing of a newly designed working electrode fitted …

    liverpool-jm Repository record for The Development of a MWCNT-DAO Biosensor for the Detection of Cadaverine in the Assessment of Periodontal Disease (opens in a new tab) Download PDF for The Development of a MWCNT-DAO Biosensor for the Detection of Cadaverine in the Assessment of Periodontal Disease (opens in a new tab)

  13. Aerosol Jet Printed Strain Gauge and Temperature Compensated Strain Gauge Design

    … and sintering the nanoparticles, the patterns printed by AJP can be used as sensors. In this thesis, strain gauges were printed using AJP. The strain gauges were printed using an ink containing silver nanoparticles and after the printing process the printed samples were sintered to make the …

    waterloo Repository record for Aerosol Jet Printed Strain Gauge and Temperature Compensated Strain Gauge Design (opens in a new tab)

  14. Elektrochemický biosenzor pro detekci glukózy

    Táto diplomová práca sa zapodieva elektrochemickým biosenzorom pre detekciu glukózy. Teoretická časť sa práce zaoberá technológiou hrubých vrstiev, jej nanášaním a výpalom. Ďalej je popísaná elektrochémia, elektródy používane v elektrochémií a analytické metódy založené na elektrochemickej reakcií. …

    brno-tech Repository record for Elektrochemický biosenzor pro detekci glukózy (opens in a new tab)

  15. Technologie pro senzory nositelné na těle

    Táto bakalárska práca sa zaoberá hrubovrstvými a tenkovrstvými technológiami vytvárania senzorov nositeľných na ľudskom tele, ktoré snímajú látky v ľudskom pote. Časť je venovaná ich rozdeleniu a následným návrhom flexibilných trojelektródových biosenzorov využívajúcich 4 rôzne elektrochemické …

    brno-tech Repository record for Technologie pro senzory nositelné na těle (opens in a new tab)

  16. Charakterizace pracovních elektrod elektrochemických senzorů modifikovaných uhlíkovými nanomateriály

    Táto bakalárska práca sa zaoberá oblasťou elektrochemickej detekcie látok pomocou tlačených hrubovrstvových senzorov. V teoretickej časti sú popísané hrubovrstvové technológie, senzory, vybrané časti z elektrochémie, voltampérometria a uhlíkové nanomateriály. Praktická časť obsahuje modifikáciu …

    brno-tech Repository record for Charakterizace pracovních elektrod elektrochemických senzorů modifikovaných uhlíkovými nanomateriály (opens in a new tab)

  17. Synthesis, formulation and printing of nanoparticle-containing inks for electronics applications

    … extensively applied for various applications in printed electronics (PE) and flexible electronic (FE) due to its high conductivity. The work presented in this study concentrates on the synthesis and characterization of NPs, ink formulation for inkjet printing technology, printing of Ag NPs inks …

    east-anglia Download PDF for Synthesis, formulation and printing of nanoparticle-containing inks for electronics applications (opens in a new tab)

  18. Organic Field Effect Transistor Semiconductor Blends for Advanced Electronic Devices Including UV Phototransistors and Single Walled Carbon Nanotube Enhanced Devices

    Two major projects involving the use of solution processed blended semiconductors for organic field effect transistors (OFET) were explored. The first incorporated unsorted single walled carbon nanotubes (SWCNTs) into a diketopyrrolopyrrole-quarterthiophene (DPP-QT) semiconductor to enhance the …

    mcmaster Repository record for Organic Field Effect Transistor Semiconductor Blends for Advanced Electronic Devices Including UV Phototransistors and Single Walled Carbon Nanotube Enhanced Devices (opens in a new tab)