Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 80 for “"Process Chemistry and Technology"”.
-
Επεξεργασία πόσιμου νερού με χρήση διεργασιών προσρόφησης
… is an essential element of human life, with safe and adequate access to clean and potable water being recognized as an inalienable human right. However, water can be contaminated by a variety of contaminants rendering it unsafe for human consumption. Therefore, various methods of water …
-
Επιθεώρηση και συντήρηση βιομηχανικού εξοπλισμού με γνώμονα την επικινδυνότητα των διεργασιών
… prepared by Mr. Nikolaos K. Defteraios, Ph.D. Candidate of the School of Chemical Engineering of the National Technical University of Athens, Department of Process Analysis and Plant Design, under the supervision of the Institute of Nuclear & Radiological Sciences and Technology, Energy & Safety …
-
Hydroxytyrosol extraction and purification from olive leaves with physicochemical processes
… that occur naturally in the metabolism of plants and are expressed in various components of them such as the leaves, tissues, flowers, and fruit. Some of them are found to be especially beneficial for the human health mainly due to their antioxidant potential, and therefore have attracted a lot of …
-
Production of porous electrodes for fuel cells supports
… of the backing supporting the Ni structure and the fragility of the glass support used. Formation of highly porous Ni supports by electroplating through a microspheres template proved to be feasible. The catalyst was deposited on the porous Ni support by both pulse plating and electrospray …
-
Ανάπτυξη πολυμερικών συστημάτων μορφολογίας καψουλών μέσω διεργασιών πολυμερισμού
… (core-shell morphology), with self-healing and self-lubrication selected as application areas. Self-healing systems have lately attracted research interest because, inspired by nature, they have the ability to autonomously detect and repair damage, without external intervention. As a result, …
-
Simulations of structured reactors for circular economy applications
… along with the retrofit of existing industrial processes constitute the necessary route for a green and sustainable energy future. In this framework, the employed reactors are probably the most critical components that govern the performance of the processes. In the present work, structured …
-
Αποθείωση μέσων κλασμάτων πετρελαίου με χρήση ιοντικών υγρών
… of middle petroleum fractions, using mild and alternative methods such as oxidative and extractive desulfurization. The work focuses on the study of both petroleum and model feeds. The novelty of the method applied, lies in the combination of the widely used system of hydrogen peroxide and …
-
Σύνθεση προηγμένων πολυμερών και διεργασίες/τροποποιήσεις σύνθετων υλικών με βάση τον άνθρακα
… (CF) precursors based on low cost raw materials and being as environmentally friendly as possible. It aims to incorporate desirable characteristics without compromising the performance, quality, functionality and useful life of the final product, in order to minimize the harmful effects of the …
-
Μελέτη της αλκοολικής ζύμωσης με χρήση ζυμών non-Saccharomyces
… of four main ingredients: water, malt, hops and yeasts. The demand for mass production of beer has led to the selection and use of specific Saccharomyces strains, which may exhibit high efficiency, but limit the variation in metabolic pathways that could provide new and interesting sensory …
-
Καταλυτική υδρογονοεπεξεργασία υποβαθμισμένων πετρελαϊκών κλασμάτων και λιπιδίων προς παραγωγή υβριδικών καυσίμων
… (LCO) using Waste Cooking Oil (WCO) via co-hydroprocessing was examined. On the one hand, LCO is one of the key products of the fluid catalytic cracking (FCC) process, as it accounts to 7.5% of total refinery capacity and 25% of FCC's total products. Even though it presents a similar boiling …
-
Θερμοδυναμική ανάλυση συστημάτων δέσμευσης διοξειδίου του άνθρακα
… Systems (CCS) focusing on chemical absorption and physical adsorption applications. Utmost objective of this work is a thorough investigation of different parameters influencing the efficiency of these processes in order to optimize the process. The tackling of these technologies is performed …
-
Theoretical and experimental study for the design of membrane processes for biogas upgrading to biomethane with simultaneous carbon dioxide recovery
… renewable energy, efficient energy usage and control of greenhouse gas emissions are among the main priorities of the EU. Biogas production from the anaerobic digestion of organic waste is a biologic treatment that both produces renewable energy in the form of biogas and recycles organic …
-
Mass concentration, composition and sources of atmospheric nanoparticles
… to particulate matter (PM), rendering their mass and composition measurement challenging. They have physicochemical properties that distinguish them from larger particles. Their small size and large surface area per unit mass facilitate deep penetration into the respiratory system and enable …
-
Recycling of precious metals from automotive catalytic converters with hydrometallurgical methods
… like carbon oxides (CO), hydrocarbons (HC) and nitrogen oxides (NOx). Car manufacturers mainly use platinum group metals (PGMs) such as platinum, palladium and rhodium to perform these catalytic functions. In general, the platinum group metals are comprised of six similar elements: iridium, …
-
Εγκλεισμός του προβιοτικού στελέχους Bifidobacterium animalis subsp. lactis BB-12 και εφαρμογή του σε τρόφιμο
… of probiotic bacteria is defined as the process of entrapping probiotic cells in food-grade materials in order to produce particles with a thin, semipermeable film having a diameter of a few nanometers to a few millimeters. The produced beads can be incorporated into food matrices for the …
-
Υπερυδροφοβικότητα σε υποβρύχιο περιβάλλον και εφαρμογές σε υπερυδρόφοβες μεμβράνες για αφαλάτωση
Superhydrophobicity refers to materials and surfaces, which due to their rough surface topography and low surface energy, strongly resist wetting. Consequently, the phenomenon of underwater superhydrophobicity refers to surfaces that are so greatly water-repellent that they can remain 'dry' even …
-
Incorporation of flexibility, reliability, availability, maintenance and safety in process operations and design
… of systematically integrating operability in process design and operations. Generic criteria and tools for the quantitative assessment and optimisation of Flexibility, Reliability, Availability, Maintenance and Safety of complex process systems are proposed.In particular, based on process …
-
Σύνθεση, χαρακτηρισμός και καταλυτική δραστικότητα τροποποιημένων περοβσκιτών τιτανίου
… that contain titanium, their characterization and the study of their catalytic and photocatalytic behavior. Three perovskite groups were prepared: ( i ) Sr1-xLaxTiO3±δ with x = 0.00, 0.10, 0.20, 0.40, 0.60, 0.80, 0.90 and 1.00, impregnated with 0.5% Pt, ( ii ) Sr1-xLax-0.02Eu0.02TiO3±δ with x = …
-
Sources and concentrations of atmospheric organic pollutants in gaseous and particulate phase
… fraction of submicron aerosol is organic (OA) and can be either primary (directly emitted in the particle phase) or secondary (formed from gas to particle conversion processes). The secondary OA (SOA) has been found to be more hazardous and harder to regulate, with chemical transport models …
-
Modelling mixed matrix membranes and ceramic foams with application to separation processes
… gas particulate filtration, coal bio-conversion process, CO2 geological storage, and biomedical processes, heterogeneous porous materials are ubiquitous. These applications rely on specific physical mechanisms, such as transport (e.g., mass, momentum, or energy) and chemical reactions for their …
Page 1 of 4