Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 87 for “"Process Economics"”.
-
The co-cultivation of rice and algae to improve process economics for algal biofuel production
… is actively encouraged and then harvested and processed into a biofuel. Improvements in cost were made by using a plastic HDPE tarp as a way to make harvesting of algae easier, decreasing the overall volume for tanks, not supplying aeration, processing wet biomass into fuel via hydrothermal …
-
Advanced anaerobic treatment for energy recovery and improved process economics in the management of biorefinery wastewaters
… This study set out to improve biorefinery process economics and enable more robust techno-economic analyses (TEAs) through a focused analysis and evaluation of the wastewater treatment process and more specifically, the anaerobic treatment system design. To this effect, this study began …
-
Ethanol production from clean chips and whole-tree chips poplar feedstocks: effects of preprocessing on ethanol yield and process economics
… this work is to develop an economically viable process to convert poplar biomass to ethanol. Two different types of poplar feedstocks were compared: poplar clean pulp chips (CPC) with low non-structural components (NSCs) content and thus more expensive; and poplar whole-tree chips (WTC) with …
-
A framework for scalable CO₂ reduction : process modeling and techno-economics to identify performance and cost tradeoffs
… pathways to accelerate scale-up by improving process economics. This dissertation also reveals trends in and key performance indicators for product cost. By integrating reactor and process modeling with techno-economic and emissions assessments, it establishes base-case prices for CO₂R …
-
A holistic approach for the optimal design and control of an intensified hydrogen production system
… membrane reactor for hydrogen production. The process was investigated both experimentally and computationally where a developed mathematical model was validated and the effects of various parameters on the performance of the aforementioned system, as defined by methane conversion were …
-
Analysis of optimization methods on chemical processes with high noise level
… study explores optimization techniques for processes with significant variation, or noise. Classical techniques are not effective when the response improvementto-noise ratio is small. In this realm of optimization, statistical techniques are necessary to achieve optimal conditions. …
-
Development of Burkholderia thailandensis as a Multiproduct Bioprocessing Platform
The development of bioprocessing platforms capable of producing multiple products from a single cultivation system, analogous to industrial biorefinery, offers opportunities to improve process economics and resource efficiency. However, realizing such systems remains challenging due to competing …
-
Electrospinning of nanofibers: analysis of diameter distribution and process dynamics for control
… implications for the product's performance and process economics. Thus, it is desirable to develop electrospinning capability to achieve consistent and controllable fiber diameters. However, the current state-of-the-art electrospinning process results in varying diameter both during a run and …
-
Process design for gallium recovery including lixiviant regeneration
… and via caustic leach behavior from iron. The process developed showed a recovery of 38% of the gallium from the zinc smelter waste product. The process economics are developed to show the conditions under which the process may be operated economically to recover gallium from this resource. The …
-
DYNAMIC MODELING AND CONTROL OF REACTIVE DISTILLATION FOR HYDROGENATION OF BENZENE
… by EPA regulations while the latter is tied to process economics due to the high octane number of toluene. It is required to satisfy both of these objectives even under the influence of disturbances, as the feed composition changes on a regular basis. The dynamic model is used for developing …
-
Transport and Phase-Transfer Catalysis in Gas-Expanded Liquids
… result in both greener chemistry and improved process economics. The transport properties of GXL are characterized by the measurement of diffusivities by the Taylor-Aris dispersion method and calculation of solvent viscosity based on those measurements. The measurement of these bulk properties …
-
Design of Recycle/Reuse Networks with Thermal Effects and Variable Sources
… reduce environmental impact, and improve process economics. The design of these networks is a challenging task because of the numerous possibilities of assigning stream (process sources) to units that may potentially employ them (process sinks). Additionally, several fresh streams with …
-
Production of phenol-formaldehyde resin composites
… with a view of suggesting ways of improving the process economics and/or the physical properties of the final product. Aspects of impregnation, drying, and lamination were investigated. The resins used in all experiments were ammonia-catalysed. Work was concentrated on the lamination stage since …
-
Recovery and evaluation of the solid products produced by thermocatalytic decomposition of tire rubber compounds
A thermal catalytic decomposition process has been developed to recycle used tire rubber. This process enables the recovery of useful products, such as hydrocarbons and carbon blacks. During the catalytic decomposition process, the tire rubber is decomposed into smaller hydrocarbons, which are …
-
Shale Gas Techno-Economic Analysis: Designing Separation Units to Handle Feedstock Variability
… of optimal size. In general plants with larger process equipment are more flexible, and are able to handle a wider range of inlet compositions, however these plants also have higher fixed and operating costs. Given for the problem studied in this work are: 1) a set of shale gas wells producing a …
-
Επιλογή δομών ρύθμισης για συστήματα μεγάλης κλίμακος
An important and challenging problem that Process Engineers frequently encounter is the determination of appropriate control structures that minimize the loss of process performance under the effect of uncertainties. This can be achieved by selecting subsets of controlled and manipulated variables …
-
Process Modeling and Techno-Economic Analysis of Thermo-Catalytic Dimethyl Ether Synthesis and Microwave-Based Aromatics Production Technologies from Shale Gas
… via conventional and microwave (MW)-assisted processes are investigated in this research. Plant-wide models of the shale gas to DME process with integrated CO2 capture via direct and indirect synthesis routes have been developed. Optimal parameter estimation, and model validation are …
-
Effects of Nutrients on Mixed-Culture Fermentation
The MixAlco® process, an example of the carboxylate platform, converts lignocellulosic biomass to hydrocarbon fuels and chemicals using mixing cultures. The performance of mixed-culture fermentation depends on various factors, such as the energy source, nutrient source, and the resulting C/N ratio. …
-
Pilot-Scale Demonstration of hZVI Process for Treating Flue Gas Desulfurization Wastewater at Plant Wansley, Carrollton, GA
The hybrid Zero Valent Iron (hZVI) process is a novel chemical treatment platform that has shown great potential in our previous bench-scale tests for removing selenium, mercury and other pollutants from Flue Gas Desulfurization (FGD) wastewater. This integrated treatment system employs new iron …
-
High Moisture Extrusion of Oatmeal
… convenient to consumers. Low moisture extrusion processing is one of the most widely used methods to produce ready to eat breakfast cereals; however, there has been little research carried out to determine if high moisture extrusion methods would be viable. This study evaluated the economic and …
Page 1 of 5