Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 59 for “"Process characterization"”.

  1. Low damage processing and process characterization

    … inductively coupled plasma source) and ashing process characterization were investigated. The primary goal was to characterize these source properties and develop corresponding applications. The study includes process damage assessment with these two sources and another continuous wave …

    wm-mary Repository record for Low damage processing and process characterization (opens in a new tab)

  2. Modeling of recovery process characterization using magnetic nanoparticles

    … help track the flood-front in waterflood and EOR processes and characterize the reservoir. The electromagnetic (EM) tomography used in the petroleum industry today is based on the difference between the electrical conductivity of reservoir fluids as well as other subsurface entities. The magnetic …

    texas Repository record for Modeling of recovery process characterization using magnetic nanoparticles (opens in a new tab)

  3. Departure process characterization analysis of a Leaky Bucket scheme

    Presents the statistical characterization analysis of the departure process in a Leaky Bucket scheme in ATM networks. The Leaky Bucket scheme is expected to reduce the burstiness of the traffic flow to the rest of the network.

    concordia Download PDF for Departure process characterization analysis of a Leaky Bucket scheme (opens in a new tab)

  4. Fouling development in full-scale RO process, characterization and modeling

    … of fouling development in a full-scale RO process in this study by considering the localized membrane fouling along the filtration channel. The fouling rate at any point in the channel is fundamentally related to both permeate flux and water fouling potential. Another main contribution of …

    nus Repository record for Fouling development in full-scale RO process, characterization and modeling (opens in a new tab) Download file for Fouling development in full-scale RO process, characterization and modeling (opens in a new tab)

  5. Process Characterization of Hydrogen Direct Reduction of Stainless Steel Oxides

    … lower solids content allows for a lower 1200 °C process temperature. Higher temperatures and longer dwell times resulted in a higher proportion of austenite compared to ferrite. This process enables fabrication of complex thin-walled geometries with reduced energy consumption and lower tooling …

    gatech Repository record for Process Characterization of Hydrogen Direct Reduction of Stainless Steel Oxides (opens in a new tab)

  6. Redox Assay Method Development And Optimization For Vaccine Production Process Characterization

    … redox environment throughout the fermentation process to gain an understanding of how the redox ratio changes in different metabolic states. The process being evaluated in this study involves the production of a recombinant protein by using the expression system of Saccharomyces cerevisiae, …

    jhu Repository record for Redox Assay Method Development And Optimization For Vaccine Production Process Characterization (opens in a new tab)

  7. Biodegradability and process characterization of nonwovens formed from cotton and cellulose acetate fibers

    … fibers, physical properties of the fabric, and process optimization of the thermal calendering. Cotton, which is a comfortable, absorbent and biodegradable fiber was the base fiber in the nonwovens. Cellulose acetate (CA), which is a thermoplastic, hydrophilic, modified cellulosic fiber was used …

    utk-theses Repository record for Biodegradability and process characterization of nonwovens formed from cotton and cellulose acetate fibers (opens in a new tab)

  8. Process Characterization of the Reactive-Ion Etching of Borosilicate Glass for Microfluidic Channels

    … purpose of this thesis was to characterize the process for the dry etching of borosilicate glass for microfluidic channels. Etch rate and surface roughness were studied, with partial pressure ratio (SF6:O2) and RF power as the factors. After formulating a DOE, the glass wafers were etched, with …

    calpoly Repository record for Process Characterization of the Reactive-Ion Etching of Borosilicate Glass for Microfluidic Channels (opens in a new tab)

  9. Process Characterization and Optimization of Roll-to-Roll Plasma Chemical Vapor Deposition for Graphene Growth

    … on Cu foil has been optimized for a roll-to-roll process using statistical optimization methods. Since graphene quality and uniformity depend on plasma input parameters, such as plasma power, gas pressure, and the gas mixture used, effects of input parameters have been explored to maximize …

    purdue-thes Repository record for Process Characterization and Optimization of Roll-to-Roll Plasma Chemical Vapor Deposition for Graphene Growth (opens in a new tab)

  10. Application of Silicon-on-Nothing and carbon sacrificial layer methods in suspended pressure and temperature sensing micromechanical systems

    … major parts, with the first one targeting the process characterization. Good command of the selected technology, awareness of its dependencies and limitations, is essential and has to be examined prior to any MEMS design. Pressure related topics are of particular interest, since this criterion, …

    qucosa-diss

  11. Single-Wall Carbon Nanotube Thin Films: Processing Measurement and Methodology

    … of thin SWCNT films is investigated during their processing for use in applications such as photovoltaic devices. A variety of methods for manipulating and visualizing these thin films are discussed, along with the setbacks encountered along the path to improving process characterization.

    ndsu Repository record for Single-Wall Carbon Nanotube Thin Films: Processing Measurement and Methodology (opens in a new tab)

  12. Characterization of ion implanted antimony

    … heavy n-type dopant, are examined from both a process end a device perspective. The context of this comparison is in applications that require a heavily doped layer beneath a thin deposit of epitaxial silicon. Results of a specific buried layer process characterization are included.

    rit Repository record for Characterization of ion implanted antimony (opens in a new tab)

  13. Design, development and fabrication of circuits using the CMOS-70 process

    … been expanded significantly to include CMOS processing. Intended for academic lab use as well as to provide the flexibility of fabrication using more modern processing, the CMOS-70 process will be a significant boon to researchers looking for ways to design and test circuits with quick …

    iastate Repository record for Design, development and fabrication of circuits using the CMOS-70 process (opens in a new tab)

  14. Characterization and integration of control structures for hierarchical process control in production systems

    … structure selection, general principles for process characterization, control element definition guidelines, formulation of control enabling principles, and definition of elementary control methods. The integration of control structures is presented from the perspective of goal and temporal …

    ttu Repository record for Characterization and integration of control structures for hierarchical process control in production systems (opens in a new tab)

  15. Self-organized inorganic-organic phyllosilicate hybrids: investigating bridging ligands and imprinting methods for heavy metal ion adsorption

    … the ethylenediamine moiety through the sol-gel process. Characterization of the material revealed disordered, interconnected phyllosilicate sheets, with a high surface area and a composition resembling natural talc. Ethylenediamine moieties were successfully incorporated into the structure of …

    laurentian Repository record for Self-organized inorganic-organic phyllosilicate hybrids: investigating bridging ligands and imprinting methods for heavy metal ion adsorption (opens in a new tab)

  16. Modeling, Optimization, Monitoring, and Control of Polymer Dielectric Curing by Variable Frequency Microwave Processing

    … there is a corresponding demand for new material processing techniques that lead to comparable or better material properties than conventional methods. Presently, conventional thermal processing steps can take several hours. A new thermal processing technique known as variable frequency microwave …

    gatech Repository record for Modeling, Optimization, Monitoring, and Control of Polymer Dielectric Curing by Variable Frequency Microwave Processing (opens in a new tab)

  17. Design, fabrication and testing of P-channel enhancement mode transistors.

    A process for fabricating PMOS transistors and test devices has been developed for educational purposes as part of a microfabrication undergraduate/graduate laboratory course at the University of Louisville. This is to help students from multiple disciplines to understand and perform basic …

    louisville Repository record for Design, fabrication and testing of P-channel enhancement mode transistors. (opens in a new tab)

Page 1 of 3