Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 177 for “"Process-Structure-Property"”.

  1. Process - Structure – Property Relationships of Electrospun Nano Fibers

    <p>Electrospinning is a process by which fibers with diameters as small as 15 nanometers are produced when a polymer solution is accelerated from a capillary towards a grounded target by an electric field. An investigation on the electrospinning process and the effect of its process variables on …

    ut-knoxville Repository record for Process - Structure – Property Relationships of Electrospun Nano Fibers (opens in a new tab)

  2. Process-structure-property relationship of a mesogenic bioerodible polyarylate

    … of materials, it is essential to apply specific processes, analyze thermal and mechanical properties, and understand the process effect and the morphology. Thermal analysis is one of the most sophisticated and well developed techniques for polymer characterization. Turi [ 1 ] has explained about …

    njit Repository record for Process-structure-property relationship of a mesogenic bioerodible polyarylate (opens in a new tab)

  3. Process-Structure-Property-Performance Modeling for Semicrystalline Thermoplastics and Composites

    … In order to design high-performance AM structures, extensive modeling and simulation are required. AM thermoplastics are similar to conventional manufacturing methods like injection or compression molding. However, due to layer-by-layer production, pressureless manufacturing, and a lower …

    clemson Repository record for Process-Structure-Property-Performance Modeling for Semicrystalline Thermoplastics and Composites (opens in a new tab)

  4. Quantitative methods for inferring process-structure-property relations in machining

    … complex thermomechanical loading drives microstructure evolution and consequently property evolution. Oxygen Free High Conductivity Copper (OFHC Cu) is studied as an example FCC system. Collected chips from machining experiments, subjected to differing process conditions, are imaged to reveal …

    gatech Repository record for Quantitative methods for inferring process-structure-property relations in machining (opens in a new tab)

  5. GPR-based Process-Structure-Property Linkages in The MKS Framework

    Establishment of low-cost high-fidelity process-structure-property (P-S-P) linkages are critical to dramatically accelerate the discovery and development of advanced materials. This task is made challenging due to the inherently high dimensional, problem-specific features which describe the …

    gatech Repository record for GPR-based Process-Structure-Property Linkages in The MKS Framework (opens in a new tab)

  6. New Microstructure Representations for Process--Structure--Property Modeling of Alloys

    … relies on understanding how the composition and processing conditions determine the structure of the material and how the structure dictates the properties of a material. Machine learning models can capture these relationships, buttheir success relies on quantitative representation of the …

    arizona-thes Repository record for New Microstructure Representations for Process--Structure--Property Modeling of Alloys (opens in a new tab)

  7. Advancing Vat Photopolymerization of Photosensitive Polyimides: Process-Structure-Property Relationships

    … properties also make them challenging to process. For this reason, they are typically only found in films, tapes, rods, and plaques. Combining the geometric freedom of VPP with the material properties of aromatic polyimides would open a wide array of new applications. Existing efforts to …

    vt Repository record for Advancing Vat Photopolymerization of Photosensitive Polyimides: Process-Structure-Property Relationships (opens in a new tab)

  8. Modeling and process-structure-property-performance study of perovskite solar cells

    … study and experimental investigation of the process-structure-property-performance relationship in perovskite solar cells. Herein, a controllable fabrication of annealing-free perovskite films with tunable crystal grain size and morphology via a seeded approach has been developed. …

    alabama Repository record for Modeling and process-structure-property-performance study of perovskite solar cells (opens in a new tab)

  9. Understanding the process-structure-property relationship in biodegradable polymer nanocomposite films

    The focus of this study was to explore process-structure-property relationships in biodegradable polymer nanocomposite films in order to eliminate the commonly used trial and error approach to materials design and to enable manufacturing of composites with tailored properties for targeted …

    gatech Repository record for Understanding the process-structure-property relationship in biodegradable polymer nanocomposite films (opens in a new tab)

  10. Process-Structure-Property Relationships of Cellulose Derivative/Thermoplastic Urethane Polymer Composites

    … robotics, flexible electronics, and adaptive structures. However, the widespread adoption of such systems remains limited by processing challenges, particularly the difficulty of incorporating cellulose derivatives into thermoplastic matrices without compromising dispersion and thermal …

    vt Repository record for Process-Structure-Property Relationships of Cellulose Derivative/Thermoplastic Urethane Polymer Composites (opens in a new tab)

  11. Process-Structure-Property Relationships in Selective Laser Melting of Aerospace Alloys

    … aerospace industry. This thesis deals with the process-structure-property relationships in selective laser melting of three aerospace alloys: Invar 36, stainless steel 316L, and Ti-6Al-4V. These alloys are weldable but hard to machine, which make them good candidates for the selective laser …

    mcmaster Repository record for Process-Structure-Property Relationships in Selective Laser Melting of Aerospace Alloys (opens in a new tab)

  12. Process-structure-property relationships in different molecular weight polyropylene melt blown webs

    … fundamental study was undertaken to assess the process-structure-property relationships as a function of the molecular weight of polypropylene resins, polymer throughput rate, air flow rate, melt blowing die orifice diameter, and extrusion and attenuation air temperatures. The properties studied …

    utk-theses Repository record for Process-structure-property relationships in different molecular weight polyropylene melt blown webs (opens in a new tab)

  13. Process-Structure-Property Relationships in Friction Stir Welded Precipitation Strengthened Aluminum Alloys

    … mechanical (TPM) model is developed for the FSW process using heat transfer module in COMSOL Multiphysics and is based on a heat source wherein the temperature dependent yield shear stress is used for the heat generation. The precipitation and coarsening model is based on the Kampmann and Wagner …

    unt Repository record for Process-Structure-Property Relationships in Friction Stir Welded Precipitation Strengthened Aluminum Alloys (opens in a new tab)

  14. Metal Additive Manufacturing Process-Structure-Property Relational Linkages Using Gaussian Process Surrogates

    Process-structure-property (PSP) relational linkages are necessary for designing, developing, and tailoring a material to exhibit desired properties, and ultimately, performance for a targeted application. Establishing PSP linkages typically involves building and testing materials from a given …

    tamu Repository record for Metal Additive Manufacturing Process-Structure-Property Relational Linkages Using Gaussian Process Surrogates (opens in a new tab)

  15. Linking process-structure-property relationships: Modeling and optimization in thin film morphologies

    … there has been a renewed interest in microstructure-sensitive design. Since processing conditions are known to heavily influence the microstructure, identifying optimal fabrication conditions is a crucial step towards the development of high-performance devices. A key component of this …

    iastate Repository record for Linking process-structure-property relationships: Modeling and optimization in thin film morphologies (opens in a new tab)

  16. Data-driven Process-Structure-Property Models for Additive Manufactured Ni-base Superalloys

    … complexity of the selective laser melting (SLM) process, which has shown success for shaping advanced structural alloys, has concentrated most of the research efforts to develop process-structure-property (PSP) models for fostering our understanding of the process that can ultimately serve as …

    gatech Repository record for Data-driven Process-Structure-Property Models for Additive Manufactured Ni-base Superalloys (opens in a new tab)

  17. AI-enabled microstructure design and process–structure–property mapping for organic electronics

    … being designed. Often, the device fabrication process involves multiple steps, and small changes in these steps can lead to very different microstructures. The relationship between material systems, processing conditions, microstructure, and device performance is complicated and hard to study. …

    iastate Repository record for AI-enabled microstructure design and process–structure–property mapping for organic electronics (opens in a new tab)

  18. Process-Structure-Property Relationship Study of Selective Laser Melting using Molecular Dynamics

    … and high-precision end-use products. The SLM processing parameters highly influence the part quality, microstructure, and mechanical properties. The process-structure-property relationship of the SLM process is not well-understood. In the process-structure study, a quasi-2D model of …

    vt Repository record for Process-Structure-Property Relationship Study of Selective Laser Melting using Molecular Dynamics (opens in a new tab)

Page 1 of 9