Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 1136 for “"Processing Parameters"”.

  1. Optimization of sweet sorghum processing parameters

    … extraction. Several chopping and separating parameters were evaluated. A statistical linear regression analysis was employed to evaluate the effects of feed rate, cutting interval, chopper knife speed, and percent of whole stalk mass segregated into the pith category on juice yield. The …

    vt Repository record for Optimization of sweet sorghum processing parameters (opens in a new tab)

  2. Impact of Processing Parameters on Conductive Polymer Electroactivity

    Soft-templating techniques have been applied to organic soluble polymer systems that produce a large variety of film morphologies. Film morphology is observed to greatly influence the system’s electrochemical current response. Thiophene-based conjugated systems are templated from chloroform and …

    texas-state Repository record for Impact of Processing Parameters on Conductive Polymer Electroactivity (opens in a new tab)

  3. Investigation of processing parameters for thermoplastic composites manufacturing

    A study was performed to investigate the processing parameters of thermoplastic composites. Three configurations of compression molding dies were machined and used to produce composite specimens. Composite specimens made of AS4/Nylon-6 and AS4/Polyphenylene Sulfide (AS4/PPS) prepreg tape were …

    unlv Repository record for Investigation of processing parameters for thermoplastic composites manufacturing (opens in a new tab) Download PDF for Investigation of processing parameters for thermoplastic composites manufacturing (opens in a new tab)

  4. Optimisation of HDDR processing parameters of sintered NDFEB magnets

    … magnetic properties was also observed. Optimal processing of sintered Nd\(_{13.4}\)Dy\(_{0.7}\)Fe\(_{78.6}\)Al\(_{0.7}\)Nb\(_{0.4}\)B\(_{6.3}\) was performed by in-situ HD followed by HDDR at 880\(^o\)C with a disproportionation pressure of 1500mbar and recombination under vacuum. The resultant …

    birmingham Download PDF for Optimisation of HDDR processing parameters of sintered NDFEB magnets (opens in a new tab)

  5. The Effect of Processing Parameters on Barrier Properties of Polymers

    <p>The intent of this work was to learn if polyethylene could be made with predictable water transfer rates by control of the microstructure. A series of films were formed from three different polyethylenes with a range crystallinities using melt pressing, a controlled cooling rate, and subsequent …

    utk-theses Repository record for The Effect of Processing Parameters on Barrier Properties of Polymers (opens in a new tab)

  6. A Globalized Optimization Schema for Automated Fiber Placement Processing Parameters

    … interacting systems and a variety of adjustable parameters that must be accounted for in the model. To account for the many degrees of freedom, arduous simulations are required. Even under the best computing environments, there is no guarantee that the frequent assumptions needed to create …

    south-carolina Repository record for A Globalized Optimization Schema for Automated Fiber Placement Processing Parameters (opens in a new tab)

  7. Investigating the effects of processing parameters in Reactive Extrusion Additive Manufacturing

    … of the fabricated parts. Understanding the processing parameters of an AM process is crucial in order to resolve complex features and produce high quality parts repeatably. While REAM has been documented in the literature, no in-depth studies investigating these processing parameters exist. …

    texas Repository record for Investigating the effects of processing parameters in Reactive Extrusion Additive Manufacturing (opens in a new tab)

  8. Neural networks approach towards determining Flax-Biocomposites composition and processing parameters

    … approach towards aiding biocomposite materials processing. At its core, the aim of the research was to investigate NN usage as a tool for advancing the field of biocomposites. Empirical data was generated for compression-molded flax fiber and High Density Polyethylene (HDPE) matrix based …

    sask Repository record for Neural networks approach towards determining Flax-Biocomposites composition and processing parameters (opens in a new tab)

  9. Validation of CReSIS Synthetic Aperture Radar Processor and Optimal Processing Parameters

    … functionality to test the implementation of the processing algorithms in CSARP. In addition to the implementation of this simulator for validation of processing the data in the along-track, cross-track and range dimensions, there are a number of data-dependent processing steps that can affect the …

    ku Repository record for Validation of CReSIS Synthetic Aperture Radar Processor and Optimal Processing Parameters (opens in a new tab)

  10. Effect of processing parameters on spray drying of full-fat soymilk

    … speed (19,300 and 26,800 rpm). Several dryer parameters and product properties were monitored and evaluated. Weather data was included;The average powder pH was 6.64 (standard deviation 0.10) which is very close to the 6.4 to 6.6 range reported in literature. Effect of process parameters on …

    iastate Repository record for Effect of processing parameters on spray drying of full-fat soymilk (opens in a new tab)

  11. Scientific predictability of solid rocket performance: Analyses of the processing parameters.

    … to bimodal mixtures. Investigation of propellant processing was conducted to determine how this model can be applied to processing. Experimental work was conducted to supply data for comparison to the computational results. This involved data gathered from an orifice viscometer on viscosity and …

    arizona-thes Repository record for Scientific predictability of solid rocket performance: Analyses of the processing parameters. (opens in a new tab)

  12. Effects of processing parameters and thickness on compression-molded PET/GF composites

    … to understand the effect of compression molding processing parameters such as temperature, pressure, dwell, and cooling rate as well as the overall panel thickness on crystallinity and mechanical properties of unidirectional glass fiber-reinforced PET. It was found that a slower cooling rate and …

    ndsu Repository record for Effects of processing parameters and thickness on compression-molded PET/GF composites (opens in a new tab)

  13. Processing parameters and kinetics of phosphate-based dechlorination for electrorefiner salt waste

    Pyroprocessing generates a salt waste stream of fission products dissolved in alkali chloride salts. Iron phosphate (FePs) glasses have been identified as candidate materials due to the high waste loading, good chemical durability, and lower processing temperatures. Phosphate-based dechlorination …

    unr Repository record for Processing parameters and kinetics of phosphate-based dechlorination for electrorefiner salt waste (opens in a new tab) Embargoed until 2027-09-05

  14. EFFECTS OF 3D PRINTING PROCESSING PARAMETERS ON MECHANICAL PROPERTIES OF POLYMERIC MATERIALS

    … were created using variations of 3D build parameters. Influence of basic parameters such as build direction, infill pattern (±45-degree lines, longitudinal lines, transverse lines, concentric lines), and printed layer height (0.2 mm, 0.16 mm, 0.1 mm) were explored on several types of …

    nps Repository record for EFFECTS OF 3D PRINTING PROCESSING PARAMETERS ON MECHANICAL PROPERTIES OF POLYMERIC MATERIALS (opens in a new tab)

  15. Friction stir processing parameters and property distributions in cast nickel aluminum bronze

    … acceptable mechanical properties. Friction stir processing (FSP) can be used to improve the alloyâ s mechanical properties by localized microstructure modification in the cast material. FSP converts an as-cast microstructure to a wrought condition in the absence of macroscopic shape change, …

    nps Repository record for Friction stir processing parameters and property distributions in cast nickel aluminum bronze (opens in a new tab)

  16. Optimization of material composition and processing parameters for hybrid organic-inorganic solar cells

    … of how to optimize both material composition and processing parameters. In this thesis, we examine processing parameters that include solution composition, annealing temperature, and the rates of spin casting and evaporative coating. We also find that the optimal weight ratio for the active layer …

    texas Repository record for Optimization of material composition and processing parameters for hybrid organic-inorganic solar cells (opens in a new tab)

Page 1 of 57