Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 39 for “"Profile Measurement"”.

  1. Silicon Doping Profile Measurement Using Terahertz Time Domain Spectroscopy

    Doping profiles in silicon greatly determine electrical performances of microelectronic devices and are frequently engineered to manipulate device properties. To support engineering studies afterward, essential information is usually required for physically characterized doping profiles. Secondary …

    rit Repository record for Silicon Doping Profile Measurement Using Terahertz Time Domain Spectroscopy (opens in a new tab)

  2. Equilibrium Beach profile measurement and sediment analysis : Mustang Island, Texas.

    This engineering report describes the measurement techniques and results of an equilibrium beach profile survey and sediment analysis. The main objective of the project was to obtain an accurate equilibrium beach profile at a location on Mustang Island, and to compare the actual profile to a …

    nps Repository record for Equilibrium Beach profile measurement and sediment analysis : Mustang Island, Texas. (opens in a new tab)

  3. Using three-dimensional profile measurement and diametric probe unit to study wearing mechanism.

    … area (2-D) and volume loss (3-D) wearing rate measurements are evaluated; these were obtained using optical 3D profile measurement. Comparative analyses of the wearing mechanisms are also discussed.

    wvu Repository record for Using three-dimensional profile measurement and diametric probe unit to study wearing mechanism. (opens in a new tab)

  4. Design and development of an on-machine profile measurement system for an ELID grinding machine

    … to ensure dimensional accuracy by improving profile and form accuracy of the ground aspheric surface. Kinematic factors are commonly considered as the reasons for the dimensional inaccuracy in a machined part. Software compensation is a direct and economical method to overcome several …

    nus Repository record for Design and development of an on-machine profile measurement system for an ELID grinding machine (opens in a new tab) Download file for Design and development of an on-machine profile measurement system for an ELID grinding machine (opens in a new tab)

  5. Optimization of primary gyratory crushing at Highland Valley Copper

    … overall context of the crushing process. Wear measurements were taken for in-service crushers during the research period using a novel laser profile measurement device. Data from the wear measurements was correlated with crusher production information such as current draw and throughput. This …

    ubc Repository record for Optimization of primary gyratory crushing at Highland Valley Copper (opens in a new tab) Download PDF for Optimization of primary gyratory crushing at Highland Valley Copper (opens in a new tab)

  6. Development of optical phase evaluation techniques: Application to fringe projection and digital speckle measurement

    … applied on fringe projection and digital speckle measurement. They provided solutions to existing problems, such as simplification of the data-recording process, discontinuous surface profile measurement, automation enhancement of digital filtering algorithms, and elimination of nonlinearity in …

    nus Repository record for Development of optical phase evaluation techniques: Application to fringe projection and digital speckle measurement (opens in a new tab) Download file for Development of optical phase evaluation techniques: Application to fringe projection and digital speckle measurement (opens in a new tab)

  7. DEVELOPMENT OF PHASE RETRIEVAL TECHNIQUES FOR DIGITAL FRINGE PROJECTION PROFILOMETRY

    This thesis focuses on increasing the measurement accuracy by compressing the noise while preserving the speed for digital fringe projection profilometry (FPP). In my thesis, the first work is to study and control the phase error influence on two popular absolute phase retrieval methods. In the …

    nus Repository record for DEVELOPMENT OF PHASE RETRIEVAL TECHNIQUES FOR DIGITAL FRINGE PROJECTION PROFILOMETRY (opens in a new tab) Download file for DEVELOPMENT OF PHASE RETRIEVAL TECHNIQUES FOR DIGITAL FRINGE PROJECTION PROFILOMETRY (opens in a new tab)

  8. Resistance to Flow Through Riprian Wetlands

    … in this research has been placed on velocity profile measurement of flow within vegetation. Measurements were taken within various density configuration of rigid simulated vegetation for emergent and submerged cases. In addition, many of the experiments tested the effect on the velocity …

    vt Repository record for Resistance to Flow Through Riprian Wetlands (opens in a new tab)

  9. Fibre optic sensor for surface roughness measurement

    … to minimizing production costs is the correct measurement and description of the surface. Two general types of measuring systems are in common use: contact and non-contact devices. A mechanical profiler, for example, works by mechanical contact of a diamond tip that travels over the surface and …

    uvic Repository record for Fibre optic sensor for surface roughness measurement (opens in a new tab)

  10. Measurement of fiber suspension flow and forming jet velocity profile by pulsed ultrasonic doppler velocimetry.

    … apply PUDV to measure the forming jet velocity profile along the jet thickness direction (ZD). In the first part, it is demonstrated that PUDV is an accurate technique for the velocity profile measurement of fiber suspension flow. The measurement has high repeatability and sensitivity. Suitable …

    gatech Repository record for Measurement of fiber suspension flow and forming jet velocity profile by pulsed ultrasonic doppler velocimetry. (opens in a new tab)

  11. Magnetron Sputtering in Silicon Rich Film Deposition

    … of deposited film was made usmg Profile Measurement, ellipsometry, Rutherford Back Scattering measurements, X-Ray Diffraction measurements and photoluminescence measurements.</p> <p>The achieved results show the principal possibility of getting microcrystalline silicon films and …

    mcmaster Repository record for Magnetron Sputtering in Silicon Rich Film Deposition (opens in a new tab)

  12. Toroidal Flow Velocity Measurement in the STOR-M Tokamak by Ion Doppler Spectroscopy

    … for the purpose of toroidal ion flow velocity measurement in the STOR-M tokamak. Emission lines from carbon and oxygen ions C_III, O_V and C_VI were used for spectral profiles measurement. Based on the Doppler effect, the ion flow velocities were calculated from the spectral line shift. The IDS …

    sask Repository record for Toroidal Flow Velocity Measurement in the STOR-M Tokamak by Ion Doppler Spectroscopy (opens in a new tab)

  13. The mechanism governing cutting of Polycrystalline Cubic Boron Nitride (PCBN) tool blanks with phase transformation induced fracture

    … Scanning Electron Microscopy (SEM), and surface profile measurement with profilometer. FEA model associated with machining parameters was developed to validate the machining mechanism and provide prediction of fracture behavior. Good agreement between simulation prediction and experimental …

    iastate Repository record for The mechanism governing cutting of Polycrystalline Cubic Boron Nitride (PCBN) tool blanks with phase transformation induced fracture (opens in a new tab)

  14. Nondestructive residual strain measurement using high energy x-ray diffraction

    … method to measure the internal strain depth-profile in materials was developed using a standard 320 kVp laboratory x-ray source. Traditional x-ray strain measurements are limited to few microns of depth due to the limited penetration of Cu Ka and Mo Ka radiation if a synchrotron or neutron …

    iastate Repository record for Nondestructive residual strain measurement using high energy x-ray diffraction (opens in a new tab)

  15. Effect of temporal fwd and profile measurements on derived pavement parameters

    … surface roughness, estimated from longitudinal profile measurements, helps determine its functional performance. However, seasonal and diurnal changes (temperature and moisture) influence such measurements. Evaluating temporal variations and quantifying their impact on these measurements may aid …

    msu Repository record for Effect of temporal fwd and profile measurements on derived pavement parameters (opens in a new tab)

  16. An investigation of the temporal character of mesoscale perturbations in the troposphere and stratosphere

    … perturbations observed in vertical detailed wind profile measurements in the troposphere and lower stratosphere. The structure and persistence of the data were analyzed and interpreted in terms of several physical models with the goal of establishing explanations for the observed persistent …

    utk-theses Repository record for An investigation of the temporal character of mesoscale perturbations in the troposphere and stratosphere (opens in a new tab)

  17. Validation of hygrothermal material modelling under consideration of the hysteresis of moisture storage

    … parameters which are obtained from basic measurements, and the storage and transport coefficients which are defined within the balance and flow equations. It is the aim of the present study to develop a flexible and widely applicable material model which is not restricted to the current …

    qucosa-diss

  18. A three dimensional surface measurement and reconstruction system for respiratory function analysis

    … not well suited in application for spirometric measurement for ambulatory monitoring. A sensor matrix measurement technique is investigated to identify suitable sensing elements with which to base an upper body surface measurement device that monitors respiration. This thesis is divided into two …

    aston Download PDF for A three dimensional surface measurement and reconstruction system for respiratory function analysis (opens in a new tab)

Page 1 of 2