Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 245 for “"Profilometer"”.

  1. High Speed Confocal 3D Profilometer: Design, Development, Experimental Results

    Most optical profilometers have difficulties in measuring three-dimensional (3D) topography of the pillar structures of transparent microfluidic devices. Existing commercial confocal profilometers are able to measure that kind of sample but their measurement speeds are too slow due to the need of …

    nus Repository record for High Speed Confocal 3D Profilometer: Design, Development, Experimental Results (opens in a new tab) Download file for High Speed Confocal 3D Profilometer: Design, Development, Experimental Results (opens in a new tab)

  2. Development of a laser based surface profilometer using the principle of optical triangulation

    … o f optical based systems, however most optical profilometers are expensive to purchase and to maintain. The development o f optical profilometers can also be exceptionally complex depending on the type o f system and its fragility may not make it suitable for m ost workshop or factory floor …

    dcu Download PDF for Development of a laser based surface profilometer using the principle of optical triangulation (opens in a new tab)

  3. EFFECTS OF SOME MACHINING VARIABLES IN LATHE FACING USING A PROFILOMETER AND SPECKLE CONTRAST METHODS TO MEASURE SURFACE ROUGHNESS

    … measurement of surface roughness is the use of a profilometer. This instrument has been found to have at least two limitations in measuring surface roughness. First, there is the limitation associated with the radius of the stylus that prevents an accurate profiling of the surface. Second, the …

    nebraska Repository record for EFFECTS OF SOME MACHINING VARIABLES IN LATHE FACING USING A PROFILOMETER AND SPECKLE CONTRAST METHODS TO MEASURE SURFACE ROUGHNESS (opens in a new tab)

  4. Sensor Fused Scene Reconstruction and Surface Inspection

    … defects can be measured with an actuated optical profilometer. The depth sensor uses a modified Kinect Fusion to create a contextual map of the environment. A custom actuated optical profilometer is created and then calibrated. The two systems are then registered to each other to place local …

    vt Repository record for Sensor Fused Scene Reconstruction and Surface Inspection (opens in a new tab)

  5. Optical reference profilometry

    The Optical Reference Profilometer is a new coordinate measurement machine (CMM) configuration that utilizes a special optical referencing frame to provide a highly stable and highly accurate surface measurement. This new referencing frame provides several mechanical advantages that make it …

    arizona-thes Repository record for Optical reference profilometry (opens in a new tab)

  6. Imaging Profilometry For In Situ Measurement of Plasma Spray Coating Thickness

    … coatings. To this end, an in situ optical fringe profilometer is developed that enables coating thickness measurements across a 2-dimensional surface. The initial profilometer concept is explored through requirements and trade studies, leading to a hardware and algorithm design family and …

    arizona-thes Repository record for Imaging Profilometry For In Situ Measurement of Plasma Spray Coating Thickness (opens in a new tab)

  7. 3D characterization of acidized fracture surfaces

    … of acidized surface textures by means of a laser profilometer to improve our understanding of the remaining etched surface topography and its hydraulic response. Visualization plots generated by the profilometer identified hydrodynamic channels that could not be identified by the naked eye in …

    tamu Repository record for 3D characterization of acidized fracture surfaces (opens in a new tab)

  8. Error Mitigation in Roughness Measurements

    … Terrain Performance Lab's (VTPL) Ford Explorer profilometer. Next, INS errors were addressed. These may include drift in the inertial measurement unit or errors due to poor reception with the global navigation satellite system. The solution to these errors was demonstrated through the VTPL's …

    vt Repository record for Error Mitigation in Roughness Measurements (opens in a new tab)

  9. Thickness Measurement of Fracture Fluid Gel Filter Cake after Static Build Up and Shear Erosion

    … measured the filter cake thickness by a laser profilometer. A correlation between leakoff volume and filter cake thickness was produced. The second stage eroded the filter cake by flowing original fracturing fluid through the core sample to study the fracturing fluid shear clean up effect on …

    tamu Repository record for Thickness Measurement of Fracture Fluid Gel Filter Cake after Static Build Up and Shear Erosion (opens in a new tab)

  10. FRACTOGRAPHY OF AS-CAST DUCTILE IRON SAMPLES AND ANALYZING THE EFFECT OF SKIN ROUGHNESS ON ITS FATIGUE PROPERTIES USING FRACTURE MECHANICS APPROACH

    … surface profile was done by performing surface profilometer tests. Profilometer tests gave a detailed picture and accurate areal parameters for surface flaws present on all the samples. Based on fractography observations and areal parameters, stress intensity factor (SIF) at surface were …

    mtu Repository record for FRACTOGRAPHY OF AS-CAST DUCTILE IRON SAMPLES AND ANALYZING THE EFFECT OF SKIN ROUGHNESS ON ITS FATIGUE PROPERTIES USING FRACTURE MECHANICS APPROACH (opens in a new tab)

  11. Printed Flexible RF MEMS Switch

    … Further investigation using an SEM and profilometer revealed that the silver cantilever was possibly not forming a solid structure, resulting in the cracking and dispersal of the nanoparticles. Profilometer measurements showed that the cantilever collapsed entirely. Material …

    texas-state Repository record for Printed Flexible RF MEMS Switch (opens in a new tab)

  12. Experimental Wear Testing Of The Piston In An Offset Crank-Slider Hydraulic Pump

    … via two methodologies: a custom-designed profilometer wear measurement rig and a precision balance. The specially constructed profilometer rig enabled capturing surface roughness data. The analysis showed that wear increases with increasing pressure and decreasing speed. The research …

    umn Repository record for Experimental Wear Testing Of The Piston In An Offset Crank-Slider Hydraulic Pump (opens in a new tab)

  13. Μελέτη των οπτικών χαρακτηριστικών σύγχρονων σκευασμάτων σύνθετων ρητινών

    … performed. Roughness was measured with a skid profilometer in four different areas of each specimen after rotating them, resulting in 24 measurements per material. A 3D optical profilometer was also used to take indicative measurements of roughness (Ra, Rz, Rq, Rt) and images of the specimen …

    greece Repository record for Μελέτη των οπτικών χαρακτηριστικών σύγχρονων σκευασμάτων σύνθετων ρητινών (opens in a new tab)

  14. COMPARISONS OF BRDF THEORIES WITH EXPERIMENT (SILICA, ALUMINUM).

    … were made with a mechanical and interferometric profilometer. The resulting values of rms surface height and autocorrelation length were used to calculate the scattering for various angles, wavelengths, and polarization conditions. Bidirectional reflectance distribution function (BRDF) …

    arizona-thes Repository record for COMPARISONS OF BRDF THEORIES WITH EXPERIMENT (SILICA, ALUMINUM). (opens in a new tab)

  15. Use of confocal profilometry to quantify erosion of wood and screen chemicals for their ability to photostabilize wood

    … specimens exposed in a QUV weatherometer. The profilometer was able to measure the erosion of specimens exposed for only 100 h in a xenon-arc weatherometer. There was a positive correlation between the size of the area of wood exposed to weathering and the erosion of wood during artificial and …

    ubc Repository record for Use of confocal profilometry to quantify erosion of wood and screen chemicals for their ability to photostabilize wood (opens in a new tab) Download PDF for Use of confocal profilometry to quantify erosion of wood and screen chemicals for their ability to photostabilize wood (opens in a new tab)

  16. Generation of Transient Deformations and Strains by Light Polymerization

    … surface resin movements to be recorded by a profilometer. Eight identical Class V preparations were drilled into a black acrylic block. The preparations were filled with Herculite and cured. For each of the eight trials, the profilometer recorded an initial extrusion of the resin composite …

    iupui Repository record for Generation of Transient Deformations and Strains by Light Polymerization (opens in a new tab)

  17. Preserving Optical Confinement in PECVD SiO<sub>2</sub> Waveguides by Control of Thin-Film Stress

    … deposition (PECVD) machine and a new 3-D optical profilometer, both of which were installed in the BYU cleanroom. The new PECVD machine was much more capable than previous machines at controlling deposition parameters and was a critical component in accurately controlling the intrinsic stress of …

    byu Repository record for Preserving Optical Confinement in PECVD SiO<sub>2</sub> Waveguides by Control of Thin-Film Stress (opens in a new tab) Download PDF for Preserving Optical Confinement in PECVD SiO<sub>2</sub> Waveguides by Control of Thin-Film Stress (opens in a new tab)

  18. Rate-Dependent Deformation of Thin Metal Foils

    … measurements showed good agreement with laser profilometer measurements at quasistatic rates. The foil samples exhibited varying behaviors when deformed at dynamic strain rates.

    tamu Repository record for Rate-Dependent Deformation of Thin Metal Foils (opens in a new tab) Embargoed until 2027-05-01

  19. Wear of ceramics and enamel in a chewing simulator

    … was measured using a non-contact 3D surface profilometer (Proscan 2000, UK). All specimens were mounted into brass holders and subjected to cyclic loading in newly developed UAB-chewing simulator for 400,000 cycles. The antagonist applied a vertical load of 10N onto ceramic specimens …

    uab Repository record for Wear of ceramics and enamel in a chewing simulator (opens in a new tab)

  20. Microwave Overlay Capacitor Fabrication on Printed Circuit Boards

    … . Surface profile sweeps were taken with a profilometer as high texture made the profilometer unsuitable for thickness measurements. The capacitor area was measured with a calibrated optical microscope. Low frequency measurements were conducted with a Solartron 1170 Frequency Response …

    queens Repository record for Microwave Overlay Capacitor Fabrication on Printed Circuit Boards (opens in a new tab)

Page 1 of 13