Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 69 for “"Projectile impact"”.

  1. Computational Simulation of Kinetic Projectile Impact for Injury Assessment

    … the risk of injury caused by the blunt impact of high-caliber kinetic impact projectiles (KIPs) to the thoracic region. While KIPs are widely used for crowd control, their classification as non-lethal has been increasingly challenged due to documented fatalities resulting from impacts to …

    texas-state Repository record for Computational Simulation of Kinetic Projectile Impact for Injury Assessment (opens in a new tab)

  2. Large displacement deformation of plates subject to projectile impact

    … type of permanent damage to plates subject to projectile impact. In addition, it is intended to assess the validity of the scale similarity laws which are applicable to impact generated structural response involving large plastic deformations. Existing literature involving analytical, …

    city-london Download PDF for Large displacement deformation of plates subject to projectile impact (opens in a new tab)

  3. RESISTANCE OF CEMENT-BASED MATERIALS AGAINST HIGH-VELOCITY PROJECTILE IMPACT

    … deformable and non-deformable high-velocity projectile impact (HVPI) at approximately 400 m/s. Cement pastes, mortars, concretes, engineered-cementitious composites (ECCs), and ultra-high-performance concretes (UHPCs) with compressive strengths from 34.2 to 220.2 MPa are against XW-42 steel / …

    nus Repository record for RESISTANCE OF CEMENT-BASED MATERIALS AGAINST HIGH-VELOCITY PROJECTILE IMPACT (opens in a new tab) Download file for RESISTANCE OF CEMENT-BASED MATERIALS AGAINST HIGH-VELOCITY PROJECTILE IMPACT (opens in a new tab)

  4. USE OF RUBBERIZED MORTAR AS A CUSHION LAYER AGAINST PROJECTILE IMPACT

    … to protect the existing structures against projectile impact. The top layer was made of high strength mortar to stop the projectile at the initial impact, while the bottom layer, made of rubberized mortar, was used to absorb the residual energy. Different rubberized layers with rubber …

    nus Repository record for USE OF RUBBERIZED MORTAR AS A CUSHION LAYER AGAINST PROJECTILE IMPACT (opens in a new tab) Download file for USE OF RUBBERIZED MORTAR AS A CUSHION LAYER AGAINST PROJECTILE IMPACT (opens in a new tab)

  5. Resistance of plain and fibre-reinforced high-strength concrete to projectile impact

    … results from an experimental study on the impact resistance of concrete with 28-day compressive strengths of 45 - 210 MPa subjected to impacts by 12.6mm ogive-nosed projectiles at velocities ranging from 615 to 714 m/s. Effects of the content, type, and length of fibres in concrete, …

    nus Repository record for Resistance of plain and fibre-reinforced high-strength concrete to projectile impact (opens in a new tab) Download file for Resistance of plain and fibre-reinforced high-strength concrete to projectile impact (opens in a new tab)

  6. Models For Projectile Impact Into Hybrid Multi-Layer Armor Systems With Axisymmetric Or Biaxial Layers With Gaps

    … fibrous material resistance to penetration under impact by high-velocity projectiles has been of great interest not only for personnel protection reasons but also because trial-and-error testing is costly and time-consuming. In this thesis, two PC-based models are developed for projectile impact …

    cornell Repository record for Models For Projectile Impact Into Hybrid Multi-Layer Armor Systems With Axisymmetric Or Biaxial Layers With Gaps (opens in a new tab)

  7. Development and Implementation of High Fidelity Human Models for the Investigation of Blast and Non-Penetrating Projectile Impact

    … and mitigating trauma caused by blast or blunt impact relied upon physical testing of animal subjects, post mortem human subjects, or human tissue surrogates, recent advances in computational capability have spurred a growing area of research in computational investigations into wound injury and …

    unm Repository record for Development and Implementation of High Fidelity Human Models for the Investigation of Blast and Non-Penetrating Projectile Impact (opens in a new tab)

  8. Dynamics of projectile impact in a granular material, and the dynamics of a single sedimenting sphere in fluid

    We have studied the dynamics of impact and sedimentation in two experimental systems. Tracking the incident object with high precision we examined the details of resulting trajectories through the ambient material in both cases. For each system direct numerical simulations have enabled us to gain …

    texas Repository record for Dynamics of projectile impact in a granular material, and the dynamics of a single sedimenting sphere in fluid (opens in a new tab)

  9. Modeling the biodynamical response of the human thorax with body armor from a bullet impact

    … the thorax's biodynamical response from a projectile impact. The finite element model of the human thorax consists of the thoracic skeleton, heart, lungs, major arteries, major veins, trachea, and bronchi. The finite element model of the human thorax is validated by comparing the model's …

    nps Repository record for Modeling the biodynamical response of the human thorax with body armor from a bullet impact (opens in a new tab)

  10. Συμπεριφορά κατασκευών υπό τυχηματικές δράσεις και επισκευή με προηγμένα υλικά και τεχνολογίες

    Existing structures are not designed to withstand impact loading. The term impact loading refers to loads from unexpected causes like explosions, impact loading from bullets etc., for which there is no provision from existing codes because the relevant strength of the building materials has not …

    greece Repository record for Συμπεριφορά κατασκευών υπό τυχηματικές δράσεις και επισκευή με προηγμένα υλικά και τεχνολογίες (opens in a new tab)

  11. DYNAMIC BEHAVIOR OF HIGH-STRENGTH FABRIC

    … understanding the response of Twaron® fabric to impact penetration by a spherical projectile. The mechanical behaviour of constituent yarns at various strain rates is determined, and the effect of weaving on yarn properties assessed. The fabric inter-yarn frictional characteristics are studied …

    nus Repository record for DYNAMIC BEHAVIOR OF HIGH-STRENGTH FABRIC (opens in a new tab) Download file for DYNAMIC BEHAVIOR OF HIGH-STRENGTH FABRIC (opens in a new tab)

  12. Application of coincidence ion mass spectrometry for chemical and structural analysis at the sub-micron scale

    … the bombardment is with a sequence of single keV projectiles, each resolved in time and space, coupled with the separate record of the secondary ions (SIs) ejected from each projectile impact. The goal of this study was to demonstrate an efficient mode of SIMS where one obtains valid analytical …

    tamu Repository record for Application of coincidence ion mass spectrometry for chemical and structural analysis at the sub-micron scale (opens in a new tab)

  13. Development of A Micro-Scale Impact Tester for Characterizing Dynamic Properties of Biological Structural Materials

    … and construction of a micro-scale, air powered, impact testing device for use in Virginia Tech's Biological and Bio-inspired Materials Laboratory. A brief overview of current projectile impact testers is presented along with motivation for the fabrication of a new testing system capable of firing …

    vt Repository record for Development of A Micro-Scale Impact Tester for Characterizing Dynamic Properties of Biological Structural Materials (opens in a new tab)

  14. An investigation of the maximum target material spray velocity produced in the penetration of thin plates by high velocity disks

    … and 0.041-cm-thick 1100 Hl4 aluminum plate. The projectiles are made of tungsten and disk shaped. Their diameter is 0.56 em and their thickness is either 0.076 or 0.038 cm. The projectile and target dimensions assure that the one-dimensional assumptions in the theory are valid.. The impact …

    vt Repository record for An investigation of the maximum target material spray velocity produced in the penetration of thin plates by high velocity disks (opens in a new tab)

  15. Use-wear analysis of the Clovis biface collection from the Gault site in central Texas

    … for probable biface functions. A series of projectile impact studies, butchering experiments, and expedient-like tool useactivities were conducted to document the traces acquired on the tool surface from use. The experimental results are used to identify the utilized tools, demonstrate their …

    tamu Repository record for Use-wear analysis of the Clovis biface collection from the Gault site in central Texas (opens in a new tab)

  16. Design and optimization of joints to mitigate shock in military vehicles under blast and impact loaDing

    … to mitigate shocks due to mine blast loading and impact loading by proper design of joint(s) in the military vehicles. Two types of vehicle configurations are studied for this purpose. The first vehicle is studied to examine ways to mitigate shock due to mine blast while the second vehicle is …

    unlv Repository record for Design and optimization of joints to mitigate shock in military vehicles under blast and impact loaDing (opens in a new tab) Download PDF for Design and optimization of joints to mitigate shock in military vehicles under blast and impact loaDing (opens in a new tab)

  17. Design and Analysis of an Innovative Semi-Flexible Hybrid Personal-Body-Armor System

    … materials, such as woven Kevlar® to stop projectiles and absorb the energy of the impact. However, absorbing the impact energy and stopping a rifle projectile comes at a cost to the wearer - mobility. In this thesis, a new concept for personal body armor is proposed - a semi-flexible …

    usf Repository record for Design and Analysis of an Innovative Semi-Flexible Hybrid Personal-Body-Armor System (opens in a new tab)

  18. High Strain Rate Impact Response of Polymeric Materials

    … This dissertation employs the Laser-Induced Projectile Impact Test (LIPIT) to investigate structure-property relationships of soft matter under supersonic micro-projectile impact. By accelerating single micro-particles to velocities of ~100-1000 m/s, LIPIT enables precise interrogation of …

    tamu Repository record for High Strain Rate Impact Response of Polymeric Materials (opens in a new tab) Embargoed until 2028-05-01

  19. High Strain Rate Impact Response of Polymeric Materials

    … This dissertation employs the Laser-Induced Projectile Impact Test (LIPIT) to investigate structure-property relationships of soft matter under supersonic micro-projectile impact. By accelerating single micro-particles to velocities of ~100-1000 m/s, LIPIT enables precise interrogation of …

    tamu Repository record for High Strain Rate Impact Response of Polymeric Materials (opens in a new tab) Embargoed until 2028-05-01

Page 1 of 4