Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 23 for “"Properties Design"”.

  1. Material properties design using simulations and experiments for powder injection molding of lead zirconate titanate (PZT).

    … molding experiments by estimating material properties necessary for PIM simulations. In current work, lead zirconate titanate (PZT) powder-polymer binder feedstock was compounded for 45 vol. % and 52 vol. % solids loading. PIM experiments on designed micro-pillar array geometry were …

    louisville Repository record for Material properties design using simulations and experiments for powder injection molding of lead zirconate titanate (PZT). (opens in a new tab)

  2. Impact of the aggregation state of amphotericin B on its biopharmaceutical properties. Design of micro- and nanocarriers for oral delivery

    … able to overcome unfavorable biopharmaceutical properties of amphotericin B (AmB), a highly effective molecule used for the treatment of systemic fungal infections and leishmaniasis, but difficult to formulate efficiently, whatever the route of delivery. It is believed that this hydrophobic …

    brazil-ufrn Repository record for Impact of the aggregation state of amphotericin B on its biopharmaceutical properties. Design of micro- and nanocarriers for oral delivery (opens in a new tab)

  3. Saying Yes: Collaboration and Scenography of Man Equals Man

    … It details the processes of the set, lights, and properties design, with a focus on the director / scenographer relationship, and an examination of the outcomes.

    calgary Repository record for Saying Yes: Collaboration and Scenography of Man Equals Man (opens in a new tab)

  4. Risk in early design (RED)

    … relationship between function and risk in early design by presenting a mathematical mapping from product function to risk assessments which can be used in the conceptual design phase. This type of mapping will aid designers by removing the subjectivity of the likelihood and consequence value from …

    must-thes Repository record for Risk in early design (RED) (opens in a new tab)

  5. A collaborative, hierarchical, incremental, and problem solving information systems development model

    … through the identification of common isomorphic properties. Design science guidelines are applied in the creation of this new model and in its validation. This theoretical model is intended to facilitate the normalization of system development methodologies by means of a framework that can gnide …

    njit Repository record for A collaborative, hierarchical, incremental, and problem solving information systems development model (opens in a new tab)

  6. INVESTIGATION OF CURE PARAMETERS FOR OPTIMISED MECHANICAL PROPERTIES IN CARBON-EPOXY COMPOSITES

    … namely carbon fibre will affect mechanical properties of composites. The objective of this paper is to produce an ideal set of processing parameters for the production of a composite automotive chassis where Tensile strength, Modulus and Poisson's ratio is of greatest concern. The study …

    nus Repository record for INVESTIGATION OF CURE PARAMETERS FOR OPTIMISED MECHANICAL PROPERTIES IN CARBON-EPOXY COMPOSITES (opens in a new tab) Download file for INVESTIGATION OF CURE PARAMETERS FOR OPTIMISED MECHANICAL PROPERTIES IN CARBON-EPOXY COMPOSITES (opens in a new tab)

  7. Evaluation of analytical and experimental methods to predict constrained layer damping behavior

    … for model comparison, sensitivity to design parameters, and evaluation of experimental loss factor estimation techniques. Model comparison for damping estimation and resonant frequency prediction was performed between finite element analysis (FEA) Ross, Kerwin, and Ungar theory (RKU), …

    vt Repository record for Evaluation of analytical and experimental methods to predict constrained layer damping behavior (opens in a new tab)

  8. Argonautika: Transformation as a Design Motif

    … is intended to demonstrate proficiency in properties and costume design for the theatre. These two areas were designed and manifested for Mary Zimmerman’s play Argonautika. This production was directed by Randi Edmundson and presented in the University Theatre at the University of Calgary …

    calgary Repository record for Argonautika: Transformation as a Design Motif (opens in a new tab)

  9. Volume change and permeability of mixtures of waste rock and fine tailings

    … waste rock and tailings is dependent on mixture design, and mixtures may therefore be designed for specific geotechnical properties. Design variables examined included mixture ratio and initial tailings solids content. Mixture ratio was found to have an optimum value where the tailings slurry …

    ubc Repository record for Volume change and permeability of mixtures of waste rock and fine tailings (opens in a new tab) Download PDF for Volume change and permeability of mixtures of waste rock and fine tailings (opens in a new tab)

  10. Investigations into the synthesis and properties of atropisomeric N-heterocyclic carbenes

    … chiral phosphines is described, followed by the properties, design and applications of chiral NHCs. Chapter 2 discusses the synthesis of NHC precursors with biaryl substituents and chirality at the 4- and 5-positions of the imidazole. Two pathways utilising Pd catalysed reactions were examined, …

    unsw Repository record for Investigations into the synthesis and properties of atropisomeric N-heterocyclic carbenes (opens in a new tab)

  11. Determination of Sensors Characteristics of Curb and Development of Surrogate Curb for the Evaluation of Vehicle Active Safety Systems

    … different sensors, and the next step is to design and develop a surrogate curb that successfully follows the properties of the real roadside objects. This thesis first demonstrates and proposes the methods for extracting the color, Radar reflectivity, and the LiDAR reflectance properties of …

    iupui Repository record for Determination of Sensors Characteristics of Curb and Development of Surrogate Curb for the Evaluation of Vehicle Active Safety Systems (opens in a new tab)

  12. In vitro assessment of deleterious impacts of organomodified nanoclays and their incinerated byproducts on human cells

    … exists describing which physicochemical properties contribute to their health risk. My M.S. work at West Virginia University in Prof. Dinu's group aimed to evaluate acute toxicity of a library of ONCs prior to and after simulated disposal by incineration. The analysis conducted high …

    wvu Repository record for In vitro assessment of deleterious impacts of organomodified nanoclays and their incinerated byproducts on human cells (opens in a new tab)

  13. Automated optimization of polymer extrusion dies using finite element analysis

    … length. Generally, the primary target of a well designed die is to produce a uniform outlet velocity without excessively raising the pressure required to extrude the polymer through the die. Other properties such as temperature uniformity and residence time are also important but are not directly …

    mtu Repository record for Automated optimization of polymer extrusion dies using finite element analysis (opens in a new tab)

  14. Hydrodynamics of needle-free jet injections

    … range of parameters associated with the drug properties, design of the nozzle and the jet injector, and jet actuation on the delivery efficiency and the drug dispersion within the skin. Using various skin models, we comprehensively studied the effect of these parameters on the delivery …

    ttu Repository record for Hydrodynamics of needle-free jet injections (opens in a new tab)

  15. The Effect of Removable Partial Denture Material and Design on Load Distribution over the Supporting Structures

    … structures. This is dependent upon materials properties, design and fit of the RPD. A significant need exists to advance the knowledge surrounding this issue and the exploration of novel materials now available for this type of prosthetic treatment.Purpose of study: The aim of this project was …

    whiterose Download file for The Effect of Removable Partial Denture Material and Design on Load Distribution over the Supporting Structures (opens in a new tab)

  16. Investigation of Vapor Deposited Conduction Seed Layer for Electrodeposition on Polymers

    … electroplated layer, and the resulting overall properties of the part. Considering a multitude of metallization processes, physical vapor deposition (PVD) offers an alternative method to solution-based metallization and has a reduced environmental footprint. These techniques will be used to …

    unf Repository record for Investigation of Vapor Deposited Conduction Seed Layer for Electrodeposition on Polymers (opens in a new tab) Download PDF for Investigation of Vapor Deposited Conduction Seed Layer for Electrodeposition on Polymers (opens in a new tab)

  17. ΛΕΙΟΤΡΙΒΗΜΕΝΗ ΕΛΛΗΝΙΚΗ ΛΙΓΝΙΤΙΚΗ ΙΠΤΑΜΕΝΗ ΤΕΦΡΑ ΩΣ ΥΛΙΚΟ ΕΝΕΣΗΣ ΤΥΠΟΥ ΑΙΩΡΗΜΑΤΟΣ ΓΙΑ ΤΗΝ ΕΠΙ-ΤΟΠΟΥ ΒΕΛΤΙΩΣΗ-ΕΝΙΣΧΥΣΗ ΕΔΑΦΩΝ

    … DOCUMENTATION AND OPTIMIZATION OF SUSPENSION PROPERTIES, EVALUATION OF THEIR INJECTABILITY AND PENETRABILITY AND QUANTIFICATION OF THE STRENGTH, MECHANICAL BEHAVIOR AND PERMEABILITY OF GROUTED SANDS. THE PULVERIZED FLY ASH SUSPENSIONS USED HAVE PROPERTIES WHICH ARE COMPARABLE TO THOSE OF …

    greece Repository record for ΛΕΙΟΤΡΙΒΗΜΕΝΗ ΕΛΛΗΝΙΚΗ ΛΙΓΝΙΤΙΚΗ ΙΠΤΑΜΕΝΗ ΤΕΦΡΑ ΩΣ ΥΛΙΚΟ ΕΝΕΣΗΣ ΤΥΠΟΥ ΑΙΩΡΗΜΑΤΟΣ ΓΙΑ ΤΗΝ ΕΠΙ-ΤΟΠΟΥ ΒΕΛΤΙΩΣΗ-ΕΝΙΣΧΥΣΗ ΕΔΑΦΩΝ (opens in a new tab)

  18. Vliv Mn a Cu na strukturu a mechanické vlastnosti litiny

    Bakalářská práce se zabývá vlivem různých faktorů, zejména chemického složení na strukturu a vlastnosti grafitických litin. V praktické části je proveden plánovaný experiment ověřující vliv manganu a mědi na mechanické vlastnosti a strukturu grafitických litin, při němž jsou odlity vzorky litiny s …

    brno-tech Repository record for Vliv Mn a Cu na strukturu a mechanické vlastnosti litiny (opens in a new tab)

  19. Structural optimization of 3D printed designs with spatially-varying material properties

    Design with conventional, homogeneous materials has historically been limited to finding ideal geometry to fit a given engineering purpose. These designs are driven by necessary geometric discontinuities which cause high strain energy gradients when subjected to mechanical loads, and thus are more …

    washington Repository record for Structural optimization of 3D printed designs with spatially-varying material properties (opens in a new tab)

  20. High temperature, permanent magnet biased, homopolar magnetic bearing actuator

    … bearings. The purpose of this research was to design and develop a high-temperature (1000ºF) hybrid Magnetic Bearing using High Temperature Permanent Magnets (HTPM), developed by the EEC for high performance jet engines at high speeds that supply loads of 500 lbf. Another objective is to …

    tamu Repository record for High temperature, permanent magnet biased, homopolar magnetic bearing actuator (opens in a new tab)

Page 1 of 2