Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 153 for “"Protective Coating"”.
-
Improving Sustainability in Protective Coating Systems
… a driving factor in the recent development of protective coating systems, from reducing volatile organic compounds (VOC’s), integrating biomass for the replacement of petrochemicals, to reducing the number of synthetic or processing steps within a coating system. Incorporating changes to …
-
Layered double hydroxide based smart protective coating systems
… of material and its industrial usage. Numerous protective measures have been employed for the corrosion protection of aluminum alloys. Chromate based coatings system was in use for a long time to protect the light metals alloys, but after the ban on Chromates based coating (2017) in European …
-
Design Of Protective Coating Composites for Niobium-Based Alloys
… stability. However, the conventionally used coating systems are not suitable for Nb-based alloy engines, primarily due to their insufficient thermal stability, limited oxidation resistance, and incompatibility with Nb-based alloys in terms of thermal expansion and phase behavior. To explore …
-
Impedance-Based Wireless Sensor Network for Metal-Protective Coating Evaluation
… is little emphasis on the degradation of metal-protective coating. Evaluating the metal-protective coating usually uses the Electrochemical Impedance Spectroscopy (EIS) method. This paper presents a new impedance-based wireless sensor network for metal-protective coating evaluation. This …
-
Pressureless Sintering of SiC - Oxide Multiphase Ceramics for Protective Coating Applications
… combustion, there exists a demand to improve coating materials that are capable of protecting SiCf/SiC CMC turbine material. Promising coating materials must be able to shield from harsh oxidation while working at extremely high temperatures. The work presented in this thesis aims to expand …
-
UV-CURABLE PROTECTIVE COATING FOR THE INNER SURFACE OF STEEL PIPES
… for new, environmentally friendly anticorrosive coatings in heavy industry. While waterborne, high solids or powder coatings have emerged as alternatives, solvent-borne coat-ings still dominate the market, contributing to polluting and toxic volatile organic compound (VOC) emissions. UV-curable …
-
Wear assesment of superplastic forming ceramic dies : a study on protective coating performance
… for most SPF applications. Suitable surface coatings have shown a significant effect on wear resistance in different applications and can be employed to improve the SPF ceramic performance in terms of tool life. This thesis addresses the lack of testing methods available to assess wear of …
-
Protective Coating of Titanium Diboride Reinforcement Particulates for Improvement of Titanium Metal Matrix Composite Armor Systems
… into TiB. It was hypothesized that a protective coating on the TiB<sub>2</sub> particulates would protect and prevent the in situ reaction. Two protective designs were investigated: depositing a carbon layer on the particle surface and also nitrogenizing the particle surface to create …
-
Evaluation of metal nitrides as the negative electrode in sodium-ion batteries and as a protective coating in lithium metal batteries
… assesses the suitability of Li<sub>3</sub>N as a protective layer on the surface of lithium metal negative electrodes; for secondary lithium metal battery and lithium-sulfur applications. a method was developed for nitriding electrodeposited lithium electrodes that were characterised by scanning …
-
Carbon xerogels doped with silicon or tin oxide for lithium-ion battery anodes
… to limit their pulverization, (ii) using a protective coating or binder to improve the SEI, and (iii) optimizing the inclusion of the silicon or tin oxide in the CX. The thesis is thus organized into three main sections: (i) the synthesis and characterization of the CX, and the modeling of …
-
The Effect of Muscle Fatigue on the Gait Stability During Walking on Steel I-Beams
… Second, investigate the effect of the I-beam protective coating in combination with muscle fatigue on gait stability. Finally, compare gait stability algorithms to see if they result in the same conclusion. (Abstract shortened by ProQuest.)
-
Characteristic influence of thermo-mechanical stresses leading to premature failure of compressor turbine blades of short-haul aircraft fleet
… electron microscopy (EDS-SEM) on the protective coating and the substrate material. Mechanical testing was ultimately executed to ascertain the micro hardness and residual strength at time of retire from service. The modeling results revealed that the tip of the CT blade had been …
-
An investigation of the hot corrosion protectivity behavior of platinum modified aluminide coatings on nickel-based superalloys.
… has necessitated the development of various protective coating systems. Diffusion aluminide coatings have been used successfully for many years to enhance the hot corrosion resistance of turbine blades and vanes. Recently, it has been found that by modifying these standard aluminide coatings …
-
An experimental investigation of low temperature plasma sterilization, treatment, and polymerization processes
… given to the study of RF plasma deposition of protective coating layer to polymeric materials.
-
Design of Polymer Composites With Improved Adhesion and Wear Properties
… lower wear compared to a commercial PTFE based coating. TOF-SIMS analysis showed that ZonylRTM particles had migrated down into the coating at least 1.5 microm deep when the wear track was only 0.2 microm deep, which means that a ATSP and Zonyl RTM composite had formed due to pressure and …
-
The Formation And Reactivity Of Some Nonmetal Silicides
… temperatures (ca. 1000°C) in order to form a protective coating.
-
Development and Characterization of Titanium Compound Nanostructures
… therefore investigated for such applications as protective coating, lubrication and thermal management.
-
Protective Ultra-High Temperature Coatings/ Ceramics (UHTCs) for Ceramic Matrix Composites in Extreme Environments
This thesis is focused on the development of a protective coating system for Cf/SiC SiCARBONTM (Airbus trademark) materials against very high temperatures in extreme environment. Here, we concentrate on the application of this technology in combustion chambers, for example in orbital thrusters. …
-
Electrochemical Investigation of Corrosion Resistance of Weldments in Steel Bridges
… steels (A572 and A588). In addition, three coating systems (3-coat, Calcium sulfonate alkyd, and metallizing coating) in steel bridges were deposited on the bridge steels. Test results revealed that the bridge steel welds exhibit higher corrosion initiation over base metals, regardless the …
Page 1 of 8