Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 5 of 5 for “"Psi-30"”.

  1. Anchorage Strength of Conventional and High-Strength Hooked Bars in Concrete

    … (2, 3, or 4), concrete compressive strength (4,300 to 16,510 psi [30 to 114 MPa]), bar stress at failure (22,800 to 141,600 psi [157 to 976 MPa]), bar diameter (No. 5, 8, and 11 [No. 19, 25, and 36]), concrete side cover (1.5 to 4 in. [38 to 102 mm]), quantity of confining reinforcement in the …

    ku Repository record for Anchorage Strength of Conventional and High-Strength Hooked Bars in Concrete (opens in a new tab)

  2. ANCHORAGE STRENGTH OF STANDARD HOOKED BARS IN SIMULATED EXTERIOR BEAM-COLUMN JOINTS

    … mm). Concrete compressive strength ranged from 4,300 to 16,510 psi (30 to 114 MPa) in simulated beam-column joints and 2,400 to 5,450 psi (17 to 38 MPa) in walls, and bar stresses at anchorage failure ranged from 27,100 to 141,000 psi (187 to 972 MPa) in simulated beam-column joints and 14,200 to …

    ku Repository record for ANCHORAGE STRENGTH OF STANDARD HOOKED BARS IN SIMULATED EXTERIOR BEAM-COLUMN JOINTS (opens in a new tab)

  3. Surface Treatment Effects On Shear Bond Strength And Biaxial Flexural Strength Of Three Generations Of Zirconia

    … 10 seconds using three different pressures (15, 30, and 45 psi) according. After particle abrasion the specimens for shear bond strength test were sonicated for 2 minutes in water and the abraded surface thoroughly dried with compressed air for 30 seconds. A tube filled with Panavia SA cement was …

    uab Repository record for Surface Treatment Effects On Shear Bond Strength And Biaxial Flexural Strength Of Three Generations Of Zirconia (opens in a new tab)

  4. Effects of Solvent Composition and Hydrogen Pressure on the Catalytic Conversion of 1,2,4,5-Tetrachlorobenzene to Cyclohexane

    … (33:67, 50:50, 67:33) were investigated at 50 psi hydrogen pressure. HDH rate coefficients increased monotonically with an increasing fraction of water in the solvent. When the water fraction in the solvent was increased from 50% to 67%, a larger HDH rate coefficient increase was observed than …

    usf Repository record for Effects of Solvent Composition and Hydrogen Pressure on the Catalytic Conversion of 1,2,4,5-Tetrachlorobenzene to Cyclohexane (opens in a new tab)