Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 142 for “"Pull-in"”.
-
Design and modeling of a MEMS-based accelerometer with pull in analysis
This thesis reports the design and modelling of a MEMS (Micro Electro Mechanical system) based inertial accelerometer. The main motivation to design a differential type of accelerometer is that such a kind of structure allows differential electrostatic actuation and capacitive sensing. They can be …
-
Effect of noise on the pull-in dynamics of an electrostatic microswitch
The goal of this research is to investigate the effects of noise on the pull-in dynamics of a micro-electromechanical switch. We take into account thermal noise and noise present in the voltage source. Thermal noise is modeled as white noise. First, we study its effect on the linear response of the …
-
Modelling the unbalanced magnetic pull in eccentric-rotor electrical machines with parallel windings
This research work is focused on developing simple parametric models of the unbalanced magnetic pull produced in eccentric-rotor electrical machines. The influence of currents circulating in the parallel paths of the stator winding on the unbalanced magnetic pull is given the main attention. The …
-
Optimisation topologique de micropoutres en vue de maximiser la tension de pull-in
ARC03/08-298 "Modeling, Multiphysics Simulation and Optimization of Coupled Problems - Application to Micro Electro-Mechanical Systems"
-
Mechanics of nanoscale beams in liquid electrolytes: beam deflections, pull-in instability, and stiction
… at equal electric potentials is derived using the modified Poisson-Boltzmann (MPB) equation to account for finite ion size. The effects of finite ion size are presented for a z:z symmetric electrolyte and compared with the pressure derived by the classical Poisson-Boltzmann (PB) equation. …
-
Stabilization of the side pull-in bifurcation of electrostatic comb drive actuators using oscillatory open-loop control
… like transverse comb drives exhibit the side pull-in instability, which may occur with respect to translational, rotational, or deformational degrees of freedom. Techniques that are successful in delaying the related pull-in instability for voltage-controlled gap-closing actuators-including …
-
Effects of slotting and unipolar flux on magnetic pull in a two-pole induction motor with an extra four-pole stator winding
… magnetic forces between the rotor and stator in twopole induction machines. The magnetic forces arise from rotor eccentricity. The asymmetric air-gap makes the flux density on one side of the rotor stronger than on the opposite side. This produces magnetic pull. The magnetic flux density …
-
Analysis by Meshless Local Petrov-Galerkin Method of Material Discontinuities, Pull-in Instability in MEMS, Vibrations of Cracked Beams, and Finite Deformations of Rubberlike Materials
The Meshless Local Petrov-Galerkin (MLPG) method has been employed to analyze the following linear and nonlinear solid mechanics problems: free and forced vibrations of a segmented bar and a cracked beam, pull-in instability of an electrostatically actuated microbeam, and plane strain deformations …
-
Topology optimization of electrostatic MEMS including stability constraints
… these actuators possess a limit voltage called pull-in voltage beyond which they are unstable. The pull-in effect, can eventually damage the device since it can be impossible to separate the electrodes afterward. Consequently, pull-in phenomenon should be taken into account during the design …
-
Millimeter-Wave Reflex Klystron Amplifier
In the process of experimentation with M-band regenerative reflex klystron amplification, a peculiar pull-in behavior of the tube under test was noted by the writer. Upon discussing this pull-in phenomenon with the writer's thesis advisor, it was decided that if subsequent investigation confirmed …
-
The tapered-width micro-cantilevers: design and characterization
… are proposed to give designers more design space in obtaining lower pull-in voltage and higher capacitance change for a cantilever with relatively short length and moderate area. Several types of the width taper functions have been investigated in this research. Based on the analytical form of the …
-
Nonlinear Dynamics of Circular Plates under Electrical Loadings for Capacitive Micromachined Ultrasonic Transducers (CMUTs)
… an electrically actuated circular plate with an in-plane residual stress for applications in capacitive micromachined ultrasonic transducers (CMUTs). After establishing the equations governing the plate, we discretized the system by using a Galerkin approach. The distributed-parameter equations …
-
Micro-g MEMS accelerometer based on time measurement
The MEMS sensor market has experienced an amazing growth on the last decades, with accelerometers being one of the pioneers pushing the technology into widespread use with its applications on automotive industry. Since then, accelerometers have been gradually replacing conventional sensors due …
-
Nonlinear dynamic analysis of electrostatically actuated MEMS structures
… electrostatic force between electrodes for sensing and actuation, have numerous advantages over other actuation mechanisms due to their ease of operation, simplicity and favourable scaling laws in the micro domain. One of the main considerations while using electrostatic actuations is that the …
-
Evaluation and Simulation of NEMS Cantilever Relays
… NEMS cantilevers were fabricated for testing as a potential replacement for nanoscale circuit components in power-critical applications such as spacecraft. These cantilevers are manipulated and switched in a horizontal plane by applying a voltage to lateral electrodes. A variety of poly-Si …
-
Ghosts and bottlenecks in elastic snap-through
<p>Snap-through is a striking instability in which an elastic object rapidly jumps from one state to another. It is seen in the leaves of the Venus flytrap plant and umbrellas flipping on a windy day among many other examples. Similar structures that snap-through are used to generate fast motions …
-
Instabilities in Multiphysics Problems: Micro- and Nano-electromechanical Systems, and Heat-Conducting Thermoelastoviscoplastic Solids
We investigate (i) pull-in instabilities in a microelectromechanical (MEM) beam due to the Coulomb force and in MEM membranes due to the Coulomb and the Casimir forces, and (ii) thermomechanical instability in a heat-conducting thermoelastoviscoplastic solid due to thermal softening overcoming …
-
Design And Characterization Of Nanoelectromechanical Switches
With the scaling down of electromechanical switches to from micro- to nano-scale, short-range forces like Casimir and van der Waals become more influential. These short range forces can significantly modify the static and dynamic behavior of the switches. In this study, the influence of these …
-
Auto-calibrated, thermal-compensated MEMS for smart inclinometers
… unique opportunities to exploit the tight coupling between co-integrated micromechanical structures and ICs (=Micro Electro Mechanical Systems (MEMS)). This coupling allows the implementation of integrated data-acquisition systems, with overall functionality or specifications that cannot be met …
-
Fabrication development of microelectro mechanical switches with nanocrystalline graphite contact
This study introduces a novel design and fabrication process for MEMS (Micro-Electro-Mechanical Systems) switches, focusing on improving performance and reliability, especially under various temperature conditions. The research presents a novel in-plane MEMS switch coupled with dual awl meander …
Page 1 of 8