Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 220 for “"Pulley"”.

  1. Retrospektive Analyse von Pulley-Läsionen an einem großen Patientenkollektiv

    … der LBS den Begriff des „stabilizing pulley“, oder Bizepspulley. Im Folgenden sollen Anatomie, Funktion und Pathologie des Bizepspulleys mit allen wichtigen anatomischen Strukturen kurz erläutert werden.

    wurz-thes Repository record for Retrospektive Analyse von Pulley-Läsionen an einem großen Patientenkollektiv (opens in a new tab)

  2. Anterosuperiores Impingement der Schulter als Folge von Pulley-Läsionen

    … patients an isolated or combined lesion of the pulley-system, the rotator-cuff, as well as the long head of the biceps tendon was observed. Postoperative improvement suggested a successful therapeutic approach and led to the conclusion that our hypothesis for the pathomechanism of ASI is …

    lmu-germany Repository record for Anterosuperiores Impingement der Schulter als Folge von Pulley-Läsionen (opens in a new tab)

  3. Nonlinear Dynamic Analysis of a Morphing Pulley Belt Drive Transmission System

    … nonlinear dynamic analyses of a morphing pulley belt drive transmission system. In a morphing pulley transmission system, different drive ratios are achieved by discretely varying the pulley diameter. The belt drive system consists of a tensioning mechanism, as well as a driver and driven …

    toronto-retro Repository record for Nonlinear Dynamic Analysis of a Morphing Pulley Belt Drive Transmission System (opens in a new tab)

  4. Syn-Drift Plate Tectonics and the Subduction Pulley: The Geodynamics of Tectonic Plates and Allochthonous Terranes

    … pull related tensile stress through a subduction pulley over long distances (>1000 km), and weak terranes can be effectively damaged at their distant locations from plate boundaries. Based on petrologic evidence and the quantitative models, such a subduction pulley process seems to have induced …

    toronto-retro Repository record for Syn-Drift Plate Tectonics and the Subduction Pulley: The Geodynamics of Tectonic Plates and Allochthonous Terranes (opens in a new tab)

  5. Design and Development of an Actuation System for the Synchronized Segmentally Interchanging Pulley Transmission System (SSIPTS)

    … for the synchronized segmentally interchanging pulley transmission system (SSIPTS). The SSIPTS is an improved transmission which offers the combined benefits of existing transmission systems for the automotive, the power generation, and the heating, ventilation, and air conditioning (HVAC) …

    toronto-retro Repository record for Design and Development of an Actuation System for the Synchronized Segmentally Interchanging Pulley Transmission System (SSIPTS) (opens in a new tab)

  6. Knotless bidirectional barbed versus smooth polypropylene three-loop pulley sutures for repair of canine gastrocnemius tendon

    … placed in the clinically utilized three-loop pulley (3LP) suture pattern in an in-vitro model for gastrocnemius tendon repair. Common calcaneal tendons and calcaneii were obtained as paired units from pelvic limbs of adult, sexually intact mixed breed dogs euthanized for unrelated reasons and …

    uiuc Repository record for Knotless bidirectional barbed versus smooth polypropylene three-loop pulley sutures for repair of canine gastrocnemius tendon (opens in a new tab)

  7. Rock Climber Awareness of the A2 Pulley Injury and Associated Safety Practices in Recreational Indoor Bouldering Gyms

    An injury to the A2 pulley is the most commonly sustained injury among all climbers, especially in recreational indoor boulderers who repetitively perform strenuous movement with limited safety equipment. The A2 pulley is a ligament in the fingers that supports tendons which allow for finger …

    texas-state Repository record for Rock Climber Awareness of the A2 Pulley Injury and Associated Safety Practices in Recreational Indoor Bouldering Gyms (opens in a new tab)

  8. Cable Driven Robots: Hysteretic Cable Stretch, Cable-Pulley Network Friction, Fatigue Life, and Kinematics of Two-Arm Multi Staged Flexible Manipulator

    … of cable and dynamic friction from guide pulleys due to variable cable tension. In this thesis, a new dynamic models of cable driven mechanism, cable-pulley network friction and hysteretic stretch of longitudinally loaded cable, are developed in order to improve control accuracy and …

    washington Repository record for Cable Driven Robots: Hysteretic Cable Stretch, Cable-Pulley Network Friction, Fatigue Life, and Kinematics of Two-Arm Multi Staged Flexible Manipulator (opens in a new tab)

  9. A Computational Iteration Method to Analyze Mechanics of Timing Belt Systems with Non-Circular Pulleys

    … consisting of a toothed belt and multiple pulleys, are used in many mechanical devices, especially in the internal combustion engine to synchronize the rotation of the crankshafts and the camshafts. When the system operates, the belt teeth will be transmitted by the pulley teeth meshed with …

    vt Repository record for A Computational Iteration Method to Analyze Mechanics of Timing Belt Systems with Non-Circular Pulleys (opens in a new tab)

  10. Microangiographic comparison of the effects of the three-loop pulley and six strand Savage tenorrhaphy techniques on the equine superficial digital flexor tendon

    … commonly used techniques, such as the three-loop pulley (3LP). A review of tendon vasculature across species and healing characteristics of tendons highlights the importance of intrinsic tendon vasculature in the healing process. Using tenorrhaphy techniques that preserve this vasculature may …

    vt Repository record for Microangiographic comparison of the effects of the three-loop pulley and six strand Savage tenorrhaphy techniques on the equine superficial digital flexor tendon (opens in a new tab)

  11. Effect of geometric, material and operational parameters on the steady-state belt response for flat belt-drives

    … tension force; and tangential and normal belt-pulley contact stresses. Belt slip is measured using the driven over driver pulleys’ angular velocity ratio. Each parameter was varied over a range to understand its impact on the steady-state belt-drive response. The material parameters studied are …

    iupui Repository record for Effect of geometric, material and operational parameters on the steady-state belt response for flat belt-drives (opens in a new tab)

  12. Finger Injuries in Recreational Rock Climbers—An MRI Study

    … was designed to determine the prevalence of pulley pathology and tendon and joint pathology in recreational rock climbers. The descriptive study used a sample of convenience and MRI to evaluate the prevalence of abnormality and to identify the distribution of pathology specific to the A2 and …

    boise Repository record for Finger Injuries in Recreational Rock Climbers—An MRI Study (opens in a new tab)

  13. Modelling and Experimentation for Temperature Prediction of a Serpentine Belt Drive System

    … The wide use of fibre-reinforced polymers (FRPs) pulleys in transmission systems has improved the systematic dynamic respond time and efficiency but also increased the possibility of pulley thermal destruction. To overcome this issue, this thesis presents three innovative and advanced thermal …

    toronto-retro Repository record for Modelling and Experimentation for Temperature Prediction of a Serpentine Belt Drive System (opens in a new tab)

  14. Synthesis of an Efficient Band Mechanism for Robots and Prosthetic Devices

    A noncircular pulley has been applied to improve the system efficiency of an electrical-powered elbow prosthesis. The dynamics of the motor and the prosthetic arm have been incorporated into the kinematic synthesis relationships for determining the pulley profile that maximizes the efficiency of …

    odu Repository record for Synthesis of an Efficient Band Mechanism for Robots and Prosthetic Devices (opens in a new tab)

  15. Synchronous Belt Mechanics and Life Prediction

    … Initially using 2 identical crankshaft pulleys, incorporating a cylinder head assembly, complete with camshaft pulley, and also using up to 2 idler pulleys, allowed tests to be conducted with other pulley arrangements un·der more representative running conditions. Prior to life testing …

    bradford Repository record for Synchronous Belt Mechanics and Life Prediction (opens in a new tab)

  16. Lower-limb robotic devices: controls and design

    … knee prosthesis design which utilizes the rope pulley mechanism and slider crank mechanism. In the pulley design for the rope pulley mechanism, a superellipse pulley is chosen to give more variation. The parameters in those mechanisms and the prosthesis are optimized, so that the knee torque …

    alabama Repository record for Lower-limb robotic devices: controls and design (opens in a new tab)

  17. A Comparative Electromyographic Study of the Effect of Four Selected Closed Chain Squat Exercises on Vastus Medialis Oblique and Vastus Lateralis

    … a ball between knees, partial squat with pulley resistance and partial squat with 45° oblique pulley resistance. Analysis of EMG for 31 normal subjects randomly performing all four exercises using repeated ANOVA were insignificant (p<.05) except for 10 males performing plain partial squat. …

    gvsu Repository record for A Comparative Electromyographic Study of the Effect of Four Selected Closed Chain Squat Exercises on Vastus Medialis Oblique and Vastus Lateralis (opens in a new tab)

  18. An interactive environment for multi-body simulation

    … this thesis develops a general purpose cable/pulley model for multi-body modeling. Because of the lack of adequate biomechanical modeling elements, general multi-body simulation packages are not used for biomechanical simulation. The motivation for this cable/pulley model is to expand the use …

    iastate Repository record for An interactive environment for multi-body simulation (opens in a new tab)

  19. Dynamic modeling of belt drives using the elastic/perfectly-plastic friction law

    … (EPP) friction law into the belt/pulley contact mechanics can yield mathematical models with enhanced accuracy. This new friction model more accurately captures the true behavior of an elastic belt that exhibits microslip prior to fully-developed slip than previous regularized …

    gatech Repository record for Dynamic modeling of belt drives using the elastic/perfectly-plastic friction law (opens in a new tab)

Page 1 of 11