Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 36 for “"Pullout Strength"”.

  1. Pullout Strength of Epoxy Anchors Installed Underwater

    … a submerged anchor installation has on the pullout strength of epoxy anchors. Two different epoxies were tested at embedment depths of two, four, and six bar diameters. These tests utilized three distinct installation procedures under dry and submerged conditions. The testing program …

    calpoly Repository record for Pullout Strength of Epoxy Anchors Installed Underwater (opens in a new tab)

  2. Electrodepostion of Iron Oxide on Steel Fiber for Improved Pullout Strength in Concrete

    … of FRC can improve the toughness, flexural strength, tensile strength, and impact strength as well as the failure mode of the concrete. It is an easy crazed material compared to others materials in civil engineering. Concrete, like glass, is brittle, and hence has a low tensile strength and …

    unt Repository record for Electrodepostion of Iron Oxide on Steel Fiber for Improved Pullout Strength in Concrete (opens in a new tab)

  3. Frontal Plane Humeral Elevation Effects on the Pullout Strength of Suture Anchors Used in Rotator Cuff Repair

    … eyelet breakage, suture failure, and anchor pullout. These failure modes necessitate intervention to reattach the tendon thus prolonging the healing period. Identifying and minimizing these failure modes will ensure optimum healing. There are two goals of this study. Firstly, the paper will …

    calpoly Repository record for Frontal Plane Humeral Elevation Effects on the Pullout Strength of Suture Anchors Used in Rotator Cuff Repair (opens in a new tab)

  4. Anchorage of Epoxy-Coated Rebar Using Chemical Adhesives

    … chemical adhesive manufacturers provide tensile strengths of their products for use with uncoated rebar and not epoxy-coated rebar. This work examined what effects the epoxy coating had on the tensile pullout strength and compared the results for epoxy-coated and uncoated rebar. Two slabs were …

    umn Repository record for Anchorage of Epoxy-Coated Rebar Using Chemical Adhesives (opens in a new tab)

  5. Η επίδραση του β-αδρενεργικού ανταγωνιστού στην οστική ενσωμάτωση των ορθοπαιδικών εμφυτευμάτων από ανοξείδωτο χάλυβα: πειραματική μελέτη σε επίμυες

    … each animal were harvested and the implants’ pullout-strength and removal torque were assessed. Results. All animals completed the study and all harvested tibias were suitable for evaluation. Both parameters were different between the two groups, favoring the study group, albeit in a …

    greece Repository record for Η επίδραση του β-αδρενεργικού ανταγωνιστού στην οστική ενσωμάτωση των ορθοπαιδικών εμφυτευμάτων από ανοξείδωτο χάλυβα: πειραματική μελέτη σε επίμυες (opens in a new tab)

  6. Orthodontic mini-implants: morphological/structure characteristics and in vivo performance in animals

    … stress generation and distribution, and pullout strength of commercially available orthodontic mini-implants (OMIs). In order to investigate the possible association of the findings and their clinical significance, four different OMIs systems were placed in early preadolescent pigs. …

    greece Repository record for Orthodontic mini-implants: morphological/structure characteristics and in vivo performance in animals (opens in a new tab)

  7. An investigation of the variables affecting pullout of seven-wire prestressing strand

    <p>The pullout strength of untensioned prestressing strand is a function of several variables. This study is an attempt to identify and isolate these variables. Reviews of the existing studies of pretensioned and untensioned strand as well as the pullout testing of larger size untensioned strands …

    ut-knoxville Repository record for An investigation of the variables affecting pullout of seven-wire prestressing strand (opens in a new tab)

  8. PHASE-FIELD FRACTURE MODELING FOR INTERLOCKING MICRO-ARCHITECTURED MATERIALS

    … bone and nacre possess a very high stiffness and strength in spite of the fact that they are composed of minerals mostly. Studies have shown the reason for this aberration as the presence of weaker interfaces with intricate interlocking architectures at microscopic levels in these materials. …

    mtu Repository record for PHASE-FIELD FRACTURE MODELING FOR INTERLOCKING MICRO-ARCHITECTURED MATERIALS (opens in a new tab)

  9. Screw fixation of implants to the spine

    … in osteoporotic bone because of its reduced strength. This research aimed to investigate screw fixation techniques in the spine. A questionnaire study, representing British and Irish spine surgeons, confirmed the potential for a simple screw positioning device and identified the need for an …

    birmingham Download PDF for Screw fixation of implants to the spine (opens in a new tab)

  10. Design and evaluation of devices for the treatment of intervertebral disorders

    … did not exceed PEEK's compressive or fatigue strength. The comparison of the mechanical properties of pedicle screws (cylindrical and dual-core), used as an integral part of the posterior lumbar stabilisation system, was performed. The screws were tested in axial pullout, quasi-static and …

    birmingham Download PDF for Design and evaluation of devices for the treatment of intervertebral disorders (opens in a new tab)

  11. Analysis and design of grade control structures using scrap tires

    … to determine the minimum requirement for the pullout strength of a binding system or tires and the required unit weight of the structure (tires and fill materials) to resist uplift and sliding. The safety factor for overcoming uplift is computed from the vertical reactions and the weight of …

    iastate Repository record for Analysis and design of grade control structures using scrap tires (opens in a new tab)

  12. Localized Expansion of Pedicle Screws for Increased Stability and Safety in the Osteoporotic Spine

    … circumference of the screw. All tests measured pullout strength, stiffness, energy to failure, toughness, and the amount of destruction to the surrounding synthetic bone. While the newly designed pedicle screw failed to produce significantly stronger pullout forces in comparison to the standard …

    usf Repository record for Localized Expansion of Pedicle Screws for Increased Stability and Safety in the Osteoporotic Spine (opens in a new tab)

  13. Use of Carbon Fiber Reinforced Polymer (CFRP) Including Sheets, Rods, and Ropes in Strengthening and Repairing Long Reinforced Concrete Columns

    The use of FRP materials in strengthening and repairing of reinforced concrete (RC) structures has increased in the past two decades. Recently, FRP materials have become one of the most used materials in rehabilitation engineering. For seismic retrofitting of RC structures, usually the process …

    portland-state Repository record for Use of Carbon Fiber Reinforced Polymer (CFRP) Including Sheets, Rods, and Ropes in Strengthening and Repairing Long Reinforced Concrete Columns (opens in a new tab)

  14. Pullout of geosynthetic reinforcement with in-plane drainage capacity in cohesive soil

    … materials because they have higher shear strength and hydraulic conductivity than cohesive soils. While there are significant economic reasons for relaxing the current strict specifications for backfill materials, most reported failures in reinforced geotechnical structures have been …

    texas Repository record for Pullout of geosynthetic reinforcement with in-plane drainage capacity in cohesive soil (opens in a new tab) Restricted access

  15. Effect of Synthetic Marrow on Synthetic Open-Cell Foam Vertebrae

    … assessed by compression testing and bone screw pullout testing. Specimens produced by PRL were soaked for four weeks in the synthetic marrow and compared to a control. Modulus, yield stress, ultimate stress, and pullout strength were all found to be significantly decreased by the synthetic …

    ku Repository record for Effect of Synthetic Marrow on Synthetic Open-Cell Foam Vertebrae (opens in a new tab)

  16. Studies on rotator cuff repairs

    … to preventing re-tear. Methods: A shoulder strength testing device was designed and built specifically to evaluate shoulder strength. A clinical trial was conducted with asymptomatic and symptomatic subjects to assess both intra-rater and inter-rater reliability of this system and current …

    unsw Repository record for Studies on rotator cuff repairs (opens in a new tab)

  17. Morphological and mechanical analysis of the glenoid trabecular bone

    … glenoid fixation, and to investigate the strength of the bone anchors as a function of bone density. Nineteen embalmed and six fresh frozen human glenoids were acquired for testing. In order to determine basic morphological and mechanical properties, specimens were tested using a flat …

    whiterose Download PDF for Morphological and mechanical analysis of the glenoid trabecular bone (opens in a new tab)

  18. Fatigue Performance of Adhesive Joints in Timber Wind Turbine Towers - A study to evaluate the fatigue performance of adhesive joints in timber connections

    … out of spruce or other coniferous lumber. The pullout strength was generally improved when increasing the anchorage length of the rod. Anyhow, the fatigue performance did not benefit of this to the same extent.

    chalmers Repository record for Fatigue Performance of Adhesive Joints in Timber Wind Turbine Towers - A study to evaluate the fatigue performance of adhesive joints in timber connections (opens in a new tab)

Page 1 of 2