Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Pullout Testing"”.
-
Large scale pullout testing of geosynthetics
… waste containment facility. A large pullout apparatus has been designed and commissioned to evaluate the mobilization of pullout resistance in geosynthetic test specimens. Sand samples were prepared by pluviation into a rectangular box, 1.30m x 0.64m x 0.60m. A stress controlled top …
-
Cervical spine bone anchoring system CSBAS pullout testing and comparisons
… cervical spines (C2-C7). Post-implantation axial pullout tests of each device using an MTS servohydraulic testing machine yielded bone purchase strength. In conclusion, analysis of test results shows that in the majority of cases the CSBAS is statistically comparable in bone purchase strength to …
-
The Development of a New Bond Stress-Slip Model in Continuously Reinforced Concrete Pavements
… that can lead to slip and cracking. Several pullout testing techniques and standards, such as AASHTO T-177 and ASTM C78, have been developed to gauge bond strength. The bond and related bond models (such as Vetter, CRCP-9, Pavement ME, Reis, and TTICRCP program) have undergone extensive …
-
Influence of Fiber Properties on the Behavior of Fiber-Reinforced Concrete
… of the research involved making FRC concrete and testing it to determine the effects of different fibers on post-crack residual strength. The materials used in this study include three types of coarse aggregates, one fine aggregate, two types of fiber, one type of cement, fly ash, and admixtures. …
-
EARLY AGE STRENGTH PREDICTION FOR HIGH VOLUME FLY ASH CONCRETE USING MATURITY MODELING
… different methods (match-cured cylinders and pullout testing) were used to estimate the early-age in-place strength of HVFA concrete to confirm the maturity predicted strengths. The results have shown that the standard and field-cured cylinder strengths underestimate the in-place concrete …
-
Geogrid-soil interaction coefficients for seismic design
… to load-controlled monotonic and cyclic pullout testing to determine the relative coefficients of interaction. The variables investigated were geogrid series (UX1500SB, UX1400HS, and UX1600HS), soil type (poorly-graded medium fine sand and poorly-graded silty fine sand-sized glass beads) …
-
Humeral Fracture Fixation Techniques: A FEA comparison of locing and compression techniques with cadaveric pullout comparison of cortical compression and internal locking screws.
… loading. Additional validation involved screw pullout testing conducted on cadaveric humeri. Results showed that the strain fields at the fracture site showed no significant variation in distribution, shape, or magnitude, therefore concluding that the locking plate offered no biomechanical …
-
An investigation of the variables affecting pullout of seven-wire prestressing strand
<p>The pullout strength of untensioned prestressing strand is a function of several variables. This study is an attempt to identify and isolate these variables. Reviews of the existing studies of pretensioned and untensioned strand as well as the pullout testing of larger size untensioned strands …
-
A Study of Correlations between Rock Bolt Pull-Out Tests and Rock Mass Rating Scores in Underground Mining
Rock bolt pullout testing is a common method of testing the strength of ground support in underground mining over time. Bolts that fail the pullout test fail either due to shear failure at the head of the bolt or by slipping in one piece out of structurally incompetent rock. There are many methods …
-
Mechanical Properties of Polymer Modified Mortar
… strength. Adhesion strength was calculated with pullout testing apparatus designed by the author. Results indicate that recycled ABS had a lower adhesive strength than the acrylic latex emulsion and the base mortar, but did increase in adhesive strength when mixed with maleic-anhydride. The …
-
Improving adhesion between Carbon Fibre Reinforcements and Alkali- Activated Cements.
… shear strength was subsequently measured through pullout testing and the degree of impregnation was examined under a microscope. A wide range of di erent solgels were tested and the purely inorganic solgels showed higher shear strengths than the textile reinforcements used in the industry today. …
-
Fiber Metal Laminate with Thickness Reinforcement
… and bonding strength of the thermoset FML. The testing results have shown improvement in tensile and flexure strength of the FML after process optimization compared to Baseline FML. Thermoplastic FML shows increased tensile and flexural properties as well. The mode I interlaminar fracture …
-
Effect of Synthetic Marrow on Synthetic Open-Cell Foam Vertebrae
… spine model will create a more realistic testing platform for medical devices employing bone screws. Preliminary work has identified glycerin as a candidate for use as a yellow marrow substitute due to its viscosity and availability. Four point bending was utilized as a rapid, preliminary …
-
Multiscale Analysis of Soil-Strap Interactions in Mechanically Stabilized Earth Retaining Walls
A numerical pullout test was built using the discrete element method (DEM) to model and capture the pullout response of steel reinforcements and soil in mechanically stabilized earth (MSE) walls. Through numerical modeling, microscale phenomena showing aggregate behavior in response to the …
-
Μελέτη της επίδρασης των ινών στη μηχανική συμπεριφορά του ινοπλισμένου σκυροδέματος
… the fiber/matrix interface was studied by fiber pullout testing in order to investigate the influence of fiber geometrical characteristics, the effect of zinc phosphate chemical treatment of fibers with different geometry, and the impact of fiber volume fraction on the pullout behavior. …
-
Evaluation of soil-geogrid interaction at different load levels using pullout tests and transparent soil
… interaction that develop at different stages of pullout tests, especially at small displacements and strains. Moreover, the behavior of transverse ribs throughout pullout testing is evaluated. Pullout loads were obtained from a load cell synchronized with two 5 MP cameras. Images of the geogrid …
-
Creep Behaviour of Post-Installed Adhesive Anchors under Various Sustained Load Levels and Environmental Exposures
… bond behavior, and an overview of available testing standards and evaluation criteria. The experimental program comprises of 82 test specimens. The specimens consist of a cylindrical shaped concrete block of 300 mm (12 inch) in diameter and 200mm (8 inch) in depth, with 15M (No. 5) deformed …
-
Osseointegration of a Cementless Total Knee Arthroplasty in a Murine Model of Glucocorticoid Induced Osteoporosis
… long, 1mm diameter) from which biomechanical pullout strength and bone ingrowth can be readily measured. The goal of the current study was to assess GCs and implant osseointegration and biomechanical strength after treatment. Skeletally mature female C57BL/6 (4-month-old, n=28) were assigned …
-
Pullout evaluation of uniaxial geogrids embedded in dredged material
… with uniaxial geogrids. A series of laboratory pullout tests were conducted using two types of uniaxial geogrids (UX1400 and UX1700) embedded in three different soil types (Monterey Sand and two different dredged materials). The laboratory results are used to examine the effect on the …
-
Effect of Construction Contaminants on the Bond-Slip Behaviour of GFRP Reinforcing Bars
… contamination on GFRP bond behaviour using pullout specimens. 13M and 20M ribbed GFRP bars, and 12M and 20M sand-coated GFRP bars were tested with surface contamination from two common materials used in concrete placement: form oil and concrete splatter. Additionally, non-destructive …
Page 1 of 2