Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 42 for “"Pulsating Flow"”.

  1. Vortex shedding flowmeter pulsating flow CFD studies

    The computational analysis of vortex shedding flow is presented, using the commercially available computational fluid dynamics ( CFD ) software package PHOENICS. In this analysis it is shown how the use of the conventional PHOENICS default first-order hybrid-upwind convective differencing scheme …

    strathclyde Repository record for Vortex shedding flowmeter pulsating flow CFD studies (opens in a new tab)

  2. Diffusion in pulsating flow in a conduit

    … study is to determine the effect of oscillating flow in a conduit in the absence of secondary flow on the rate of mass transfer to the wall, and the parameters that influence the magnitude of the change in the flux. Flow in an artery is pulsatile in nature and it will be shown in a later section …

    rice Repository record for Diffusion in pulsating flow in a conduit (opens in a new tab)

  3. Pulsating Flow of Non-Newtonian Fluids in Pipes

    … formulation and solution for unsteady flows (pulsatile and start-up flows) of non-Newtonian time-independent fluids through rigid pipes. The approach was based on the use of the equation of motion for axisymmetric unsteady flow of fluids in cylindrical coordinates. In the case of …

    mcmaster Repository record for Pulsating Flow of Non-Newtonian Fluids in Pipes (opens in a new tab)

  4. Numerical investigation on laminar pulsating flow through porous media

    In this investigation, the flow friction associated with laminar pulsating flows through porous media was numerically studied. The problem is of interest for understanding the regenerators of Stirling and pulse tube cryocoolers. Two-dimensional flow in a system composed of a number of unit cells of …

    gatech Repository record for Numerical investigation on laminar pulsating flow through porous media (opens in a new tab)

  5. Design and evaluation of a pulsating flow wind tunnel

    A wind tunnel was designed and built to produce a pulsating flow. The pulsation was achieved by a series of shutters (rotating with constant angular velocity) placed upstream of the settling chamber inlet. The system was optimized to obtain nearly sinusoidal velocity waveforms with the highest …

    vt Repository record for Design and evaluation of a pulsating flow wind tunnel (opens in a new tab)

  6. The Development of a High Pressure Pulsating Flow Hydraulic Servomechanism

    Pulsating flow 9p.f.) hydraulic control systems offer a number of unique advantages over conventional direct or continuous flow (c.f.) systems. These advantages make pulsating flow control particularly useful and desirable in certain specific applications. these applications are related mainly to …

    sask Repository record for The Development of a High Pressure Pulsating Flow Hydraulic Servomechanism (opens in a new tab)

  7. Thermal dispersion and convective heat transfer during laminar pulsating flow in porous media

    Solid-fluid thermal interactions during unsteady flow in porous media play an important role in the regenerators of pulse tube cryocoolers. Pore-level thermal processes in porous media under unsteady flow conditions are poorly understood. The objective of this investigation is to study the …

    gatech Repository record for Thermal dispersion and convective heat transfer during laminar pulsating flow in porous media (opens in a new tab)

  8. The Determination of Periodic Pulsating Flow in Complex Piping Systems Bythe Impedance Method

    Made available in DSpace on 2014-12-09T17:13:46Z (GMT). No. of bitstreams: 1 6901485.pdf: 3825252 bytes, checksum: 8a12f6b1345fcb7f513c3ce814c2e771 (MD5) Previous issue date: 1968

    uiuc Repository record for The Determination of Periodic Pulsating Flow in Complex Piping Systems Bythe Impedance Method (opens in a new tab)

  9. Fluid-structure interaction of steady and pulsating flow through a collapsible thin-walled vessel

    … in collapsible tubes under steady and pulsatile flow conditions, which holds significant implications for many physiological fluid transport phenomena. Quantitative analysis of structural deformation and flow field analysis were conducted utilizing Particle Image Velocimetry (PIV) and optical …

    ndsu Repository record for Fluid-structure interaction of steady and pulsating flow through a collapsible thin-walled vessel (opens in a new tab)

  10. Methodology for the Numerical Characterization of a Radial Turbine under Steady and Pulsating Flow

    … outstanding research to understand the internal flow in turbomachines. In this frame, computational fluid dynamics (CFD) is one of the tools that can be applied to contribute to the analysis of the fluid-dynamic processes occurring in a turbine. The objective of this thesis is the development of …

    upv Repository record for Methodology for the Numerical Characterization of a Radial Turbine under Steady and Pulsating Flow (opens in a new tab)

  11. Time-Resolved PIV and Pressure Measurements of Oscillating and Pulsating Flow in a Diffuser

    Separating oscillating and pulsating flows in an internal adverse pressure gradient geometry are studied experimentally. Simultaneous velocity-pressure measurements demonstrate that the minor losses associated with oscillating flow in an adverse pressure gradient geometry can be smaller or larger …

    utahstate Repository record for Time-Resolved PIV and Pressure Measurements of Oscillating and Pulsating Flow in a Diffuser (opens in a new tab)

  12. Heat transfer enhancement phenomena and pressure drop characteristics in two-phase pulsating flow using R-134A

    … pressure drop aspect of a saturated two-phase flow imposed to periodic inlet mass flow rate were studied using both experimental and modeling approaches. The two-phase flow of R-134 was tested in a single pass, horizontal smooth copper tube coil with a 6.2 mm (0.244-in.) inner diameter. The …

    uiuc Repository record for Heat transfer enhancement phenomena and pressure drop characteristics in two-phase pulsating flow using R-134A (opens in a new tab)

  13. Fluid flow measurement using correlation techniques

    … cross correlation method to measurement of flow under steady and pulsating flow conditions is investigated. The factors to be considered in applying this technique to different flow systems are discussed and its advantages over the conventional techniques are highlighted. The method involves …

    bradford Repository record for Fluid flow measurement using correlation techniques (opens in a new tab)

  14. Transient response performance of an engine turbocharger

    … performance of an exhaust gas turbocharger underpulsating and non-pulsating flow conditions.Using the measured steady state characteristics of theturbocharger compressor and turbine, theoretical proceduresare developed to predict its transient response duringrapid variations in the turbine inlet …

    salford Download PDF for Transient response performance of an engine turbocharger (opens in a new tab)

  15. Thermal stresses in pipes

    … heated pipes that are subjected to different flow types: laminar flow, turbulent flow, and pulsating flow. The effect o f flow Reynolds number on thermal stresses in the pipe is studied. To investigate the influence o f fluid and solid properties on the resulting thermal stresses in pipes, two …

    dcu Download PDF for Thermal stresses in pipes (opens in a new tab)

  16. Hydraulic Transport of Sand and Lime Slurries in a Vertical Pipeline

    … vertical pipeline for both steady and pulsating flows.</p> <p>In the steady flow experiments, three different grades of sand of average weighted diameter d = 0.66, 1.20 and 1.84 mm. were investigated. The lime flurry used had an average particle diameter of 1.8 x 10⁻³ mm. The delivered …

    mcmaster Repository record for Hydraulic Transport of Sand and Lime Slurries in a Vertical Pipeline (opens in a new tab)

  17. Asymptotic conditions at infinity for the time-periodic Stokes problem set in domains with cylindrical outlets to infinity /

    … infinity. This mathematical model describes the pulsating flow of the viscous incompressible fluid in systems of thin and long pipes. We derive the generalized Green formula, which allows us to formulate so called asymptotic conditions at infinity. These conditions ensure the unique solvability …

    vilnius Repository record for Asymptotic conditions at infinity for the time-periodic Stokes problem set in domains with cylindrical outlets to infinity / (opens in a new tab)

  18. Experiments and Modelling of Automotive Turbochargers under Unsteady Conditions

    … losses and the turbine behaviour under highly pulsating boundary conditions. This work is focused on the improvement of current one-dimensional models, for both mechanical losses prediction and high frequency pulsating flow turbine performance. After reviewing the state-of-the-art in …

    upv Repository record for Experiments and Modelling of Automotive Turbochargers under Unsteady Conditions (opens in a new tab)

  19. Mathematical Modeling of Pulse Combustion and It's applications to innovative thermal drying techniques

    … understand the dynamics of the flame structure, flow-chemistry interaction and the pulsating flow characteristics. PC-based impinging jet drying of paper sheets, spray drying of suspensions and spouted bed drying of particles were also investigated experimentally and numerically to evaluate …

    nus Repository record for Mathematical Modeling of Pulse Combustion and It's applications to innovative thermal drying techniques (opens in a new tab) Download file for Mathematical Modeling of Pulse Combustion and It's applications to innovative thermal drying techniques (opens in a new tab)

Page 1 of 3