Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 43 for “"Pulse current"”.

  1. Copper and tin electrodeposition from deep eutectic solvents using pulse current

    … studies are performed using direct current (DC) plating method. However, metal plated using this method often suffers from issues such as poor deposit quality and low Faradaic efficiency, which lead to the adoption of pulse plating method as an alternative. Currently, most studies of …

    strathclyde Repository record for Copper and tin electrodeposition from deep eutectic solvents using pulse current (opens in a new tab)

  2. Ηλεκτρολυτική συν-απόθεση υβριδικών σωματιδίων με βάση τον άνθρακα σε μήτρα νικελίου

    … was used (ω= 400 rpm), and both direct (DC) and pulse current (PC) was applied. The effect of the imposition of different frequencies of current pulses (ν= 0.1 up to 1000 Hz) as well as the presence of the anionic surfactant Sodium Dodecyl Sulfate (SDS) on the structure, the morphology and the …

    greece Repository record for Ηλεκτρολυτική συν-απόθεση υβριδικών σωματιδίων με βάση τον άνθρακα σε μήτρα νικελίου (opens in a new tab)

  3. Σύνθετες επικαλύψεις μήτρας Νi-P με ηλεκτρολυτική συναπόθεση σωματιδίων SiC και WC σε συνθήκες παλμικού ρεύματος: σύνθεση, δομή και μηχανικές ιδιότητες

    … using a rotating disc electrode and direct and pulse current regime, were studied. The aim of this work was the study of the effect of various electrolysis parameters on the structure, morphology and composition of the coatings, along with the study of the mechanical properties of the coatings …

    greece Repository record for Σύνθετες επικαλύψεις μήτρας Νi-P με ηλεκτρολυτική συναπόθεση σωματιδίων SiC και WC σε συνθήκες παλμικού ρεύματος: σύνθεση, δομή και μηχανικές ιδιότητες (opens in a new tab)

  4. Σύνθετες ηλεκτρολυτικές επικαλύψεις μήτρας νικελίου με καρβίδια του πυριτίου και του βολφραμίου

    … Watts solution by applying either direct or pulse electroplating, was investigated. The structure, the morphology and respectively the mechanical properties of composite materials depend on the amount of incorporated particles in the metallic matrix. The impose of pulse current affect the …

    greece Repository record for Σύνθετες ηλεκτρολυτικές επικαλύψεις μήτρας νικελίου με καρβίδια του πυριτίου και του βολφραμίου (opens in a new tab)

  5. In-Situ Stress Measurements During Electrodeposition of Chromium Films

    … been realized as the causes of the cracks. Thus, pulse current deposition approach with periodic “on” and “off” time proposed as a solution. In our study, we focus on the stress evolution of chromium film deposited with various parameters to find pulse current function that effectively removes …

    houston Repository record for In-Situ Stress Measurements During Electrodeposition of Chromium Films (opens in a new tab)

  6. Environmentally friendly baths for Cu-Sn co-electrodeposition: cyanide-free aqueous bath and deep eutectic solvents

    … replacement on anode material and utilization of pulse current. Contrary to that, research on electrodeposition from deep eutectic system was quite new and few relevant studies can be referred especially in the field of alloys. As a result, this work started from deposition of single metal for …

    trento Repository record for Environmentally friendly baths for Cu-Sn co-electrodeposition: cyanide-free aqueous bath and deep eutectic solvents (opens in a new tab)

  7. Ηλεκτροχημική σύνθεση δισδιάστατων (2D) και μονοδιάστατων (1D) νανοδομημένων υλικών με βάση τον κασσίτερο

    … studied for 2D nanostructures. Both direct and pulse current were applied. Nanocrystalline TiO2 powders, a) photoreactive in UV-light irradiation and b) chemically modified (N,S-TiO2 and Kronos TiO2) and photoreactive in visible-light irradiation, were used. The effect of electrolytic process …

    greece Repository record for Ηλεκτροχημική σύνθεση δισδιάστατων (2D) και μονοδιάστατων (1D) νανοδομημένων υλικών με βάση τον κασσίτερο (opens in a new tab)

  8. Electrodeposition Coatings by Ionic Co- discharge Technique

    … Cu). A number of plating parameters including current density, deposition time, direct or pulse current supply and concentration of Bi ions in the electrolyte have been investigated to evaluate their effect on the coating preparation and quality. Experimental results indicated that the …

    auckland-ms Repository record for Electrodeposition Coatings by Ionic Co- discharge Technique (opens in a new tab)

  9. Electroplating of Cr-Ni Alloy and Ni-Cr/Ni Multilayer Coatings

    … in aqueous and in organic solution by direct current were studied for Ni-Cr alloy coatings, and Ni-Cr multilayer coatings were prepared by pulse current electroplating in single bath. Traditionally, chromium or chromium alloy coatings were deposited from Cr(VI) bath. The main advantage of a …

    wvu Repository record for Electroplating of Cr-Ni Alloy and Ni-Cr/Ni Multilayer Coatings (opens in a new tab)

  10. Modal characterization of 940 nm VCSELs for 3D-sensing and LiDAR application

    … output power and voltage as a function of bias current (IPV), optical spectrum and 2D far-field mode profile were measured. All measurements were done at different temperatures and under continues-wave (CW) and pulse current operations. Finally, the output data are analyzed and reported in this …

    chalmers Repository record for Modal characterization of 940 nm VCSELs for 3D-sensing and LiDAR application (opens in a new tab)

  11. Electron Cyclotron Resonance Thruster Diagnostics & Performance Analysis

    … under various permutations of steady state and pulsed operating regimes was analyzed in terms of thrust performance, plasma properties, including ion energy distribution functions, pulse current contour profiles, and thruster plume characteristics, including plume divergence and mass utilization …

    washington Repository record for Electron Cyclotron Resonance Thruster Diagnostics & Performance Analysis (opens in a new tab)

  12. Elektrolitinių kondensatorių ekvivalentinės varžos tyrimas kieto kūno lazerių sistemose /

    … of equivalent series resistance (ESR) and impulse parameters of electolytic capacitors in a solid state pulsed laser system‘s electronics. The investigated system uses a capacitor bank which supplies high current pulses into a laser diode, which excites the pump medium of the laser. …

    vilnius Repository record for Elektrolitinių kondensatorių ekvivalentinės varžos tyrimas kieto kūno lazerių sistemose / (opens in a new tab)

  13. Material Characterization of Electrodeposited Copper-Nickel Nanolaminated Alloy by SEM, EDS, and XRD

    … The processing method of interest was pulse current electrodeposition of Cu-Ni a rotating disk electrode (RDE) with increased rotation speed during deposition of Cu-rich layers. Although copper content was enhanced in this way, it also caused macroscopic swirls in the deposit's surface, …

    washington Repository record for Material Characterization of Electrodeposited Copper-Nickel Nanolaminated Alloy by SEM, EDS, and XRD (opens in a new tab)

  14. Analysis of a Portable, One Hundred Ampere Pulse Test Current Microhmmeter

    … which is a portable apparatus using a pulse current power source in the measurement of load resistances in the microhm range. The need for accurately measuring resistances in the microhm range is quite real for testing electrical power circuit breaker contact resistance. Both during …

    ucf Repository record for Analysis of a Portable, One Hundred Ampere Pulse Test Current Microhmmeter (opens in a new tab)

  15. Electrochemical Synthesis of Soft Magnetic Alloys and Laminates for High Frequency Field Application

    … and bulk alloys. Using a combination of direct current (DC) and pulse current deposition methods, multilayered magnetic structures are produced from a single bath chemistry containing pyrrole monomer, phosphorus additive, or a combination of both. The resulting inductor cores consist of …

    houston Repository record for Electrochemical Synthesis of Soft Magnetic Alloys and Laminates for High Frequency Field Application (opens in a new tab) Embargoed until 2028-05-01

  16. An analysis of pulse transformers

    … understanding of the behaviour of the output pulse transformer used in an electric fence energiser, a unique application which has received little attention in the literature. Maxwell’s Equations form the starting point for an investigation into the magnetisation of the magnetic core under …

    waikato-masters Repository record for An analysis of pulse transformers (opens in a new tab) Download file for An analysis of pulse transformers (opens in a new tab)

  17. Influência da corrente de pulso, do tempo de pulso e diâmetro de gota sobre a estabilidade da transferência metálica no processo MIG-P

    … it is necessary an adequate parameters set: base current and time, pulse current and pulse time, because these influence the mode of metal transfer and the weld quality in the MIG-P, sometimes requiring special sources with synergistic modes with external control for this stability. This work aims …

    brazil-ufrn Repository record for Influência da corrente de pulso, do tempo de pulso e diâmetro de gota sobre a estabilidade da transferência metálica no processo MIG-P (opens in a new tab)

  18. Electrodeposition of CoNiFeX magnetic Films with Low Magnetic Losses for Power Applications

    … concepts in semiconductor industry. Direct current (DC) and pulse current (PC) deposition methods to produce CoNiFeX alloys is employed to demonstrate control over BCC crystal structure by tuning transport conditions during electrodeposition. The BCC structure of CoNiFeX alloys is …

    houston Repository record for Electrodeposition of CoNiFeX magnetic Films with Low Magnetic Losses for Power Applications (opens in a new tab)

  19. Development of a Nano-Composite Coating Technology for Improvement of Carbon Steel Pipe to Erosion-Corrosion in Oil Sands Slurry

    … SiC nano-particles in bath electrolyte, cathodic current density, current pattern and temperature, affect remarkably the particle deposition which relates directly with the coating performance. Furthermore, the parameters in pulse current electrodeposition also affect the properties and …

    calgary Repository record for Development of a Nano-Composite Coating Technology for Improvement of Carbon Steel Pipe to Erosion-Corrosion in Oil Sands Slurry (opens in a new tab)

Page 1 of 3