Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"Pulse modulation (Electronics)"”.
-
Parallel data transmission in the dispersive channel / by Dean J. Patterson
1 v. (various paging) : ill. ; 26 cm.
-
An enhanced pulse position modulation (PPM) in ultra-wideband (UWB) systems
… (UWB) systems. The main advantage of existing pulse-position modulation (PPM) schemes is simplicity, but their BER performance is poorer than that of an on-off-keying (OOK) modulation scheme, and their transmission rate is lower than that of an OOK scheme. In this research project, I will …
-
On the conditional mean for fading channels
… an estimate of the amplitude of a Gaussian pulse which has been. transmitted over a purely-fading channel is investigated in the context of nonlinear estimation theory. The performance of a physically realizable maximum aposteriori probability (MAP) estimate is evaluated. A transmitted …
-
Development of an algorithm for the detection of coherency in radar signal waveforms
… the stability of parameters such as phase, Pulse Repetition Interval (PRI) and amplitude are typically specified because of the ease in instrumenting the measurement. The parametric estimates are indeed the most useful in describing the characteristics of the waveform but not necessarily for …
-
Design and control of a multilevel inverter for electric vehicles
Thesis (M.S.)--Michigan State University. Electrical Engineering, 2008
-
Development of a gigawatt repetitive pulse modulator and high-pressure switch test stand and results from high-pressure switch tests
… documents the efforts in developing repetitively pulsed, high-pressure oil switch technology. A high-pressure oil switch has been designed and optimized for lifetime operation to more than 10⁷ shots at the 250 J-level under repetitive pulsed conditions. The switch delivers pulses that are - 125 …
-
Pulse-width-amplitude modulation (PWAM) for reducing inverter switching loss in HEV/EV motor or generator system
… introduces a novel PWM control strategy - "Pulse-Width-Amplitude Modulation (PWAM)" method for HEV/EV motor or generator system. This modulation method is quite different from other PWM methods that have been well researched or commonly used for the inverter in HEV/EV system. By using this …
-
Development of high performance induction motor drives
… motors were built and tested. Real time pulse width modulated waveforms were generated to drive the inverters using a microprocessor and a PWM modulator chip. This dissertation discusses the design, implementation, and testing of the drives and gives experimental results. Dynamic modeling …
-
CDMA receiver structures for multipath communications
In this thesis, various design aspects of DSSS (Direct-Sequence Spread Spectrum) CDMA (Code Division Multiple Access) systems operating in multipath environment are studied. In particular, DSSS receiver structures capable of exploiting the diversity accorded by multipath propagation are examined. …
-
Mapping of pulse width modulation algorithms into architecture
Thesis (M.S.)--Michigan State University. Department of Electrical Engineering, 1989
-
Optical arbitrary waveform generation using chromatic dispersion in silica fibers
A novel approach to optical pulse shaping and arbitrary waveform generation (OAWG) using time-domain spectral shaping (TDSS) in negative and positive dispersion in commercial optical fibers has been proposed and evaluated. In order to study the pulse shaping capability of this OAWG system, …
-
Novel architectures for broadband free-space optical communications: deep-space and terrestrial optical links
The main objective of this research is to design, simulate, and evaluate telescope array-based receiver architectures for the inter-planetary optical communication links, which is able to provide broadband data support for future deep-space and universe exploration missions. The major aspects of …
-
Development of a Radar Pulse Modulator
… summarizes the design of a 25kW peak power pulse modulator for an airborne medium--range weather radar. It is the purpose of the modulator to collect and store energy over a certain time period and to form this energy into a short, high-power pulse. The modulator is required to drive a …
-
A High Speed Pulse Code Laser Diode Modulator
This research report reviews the basics of pulse code modulation (PCM) techniques and includes a special encoder design for a system which uses a laser diode output for the transmitted pulse. The text discusses PCM and its features, PCM formats, synchronization, and various accepted PCM codes. The …
-
Development of a DME Simulator
… station. This information is in the form of two pulses whose separation represents that elapsed transmission time for an aircraft to receive a reply from the ground station to an interrogation by the aircraft. The pulse spacing must be selectable as fixed distances for static tests and as …