Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"Pulse plating"”.

  1. Control of electrodeposit properties of nickel and nickel alloy by pulse plating.

    Pulsed-current electrolysis with various ratios of on-time to off-time have been applied to the deposition of Ni and Ni/Fe alloys from Watts and Ni/Fe baths.The electro-depositions of nickel and nickel-iron alloy on copper and mild-steel substrates using Watts and Ni/Fe baths have been …

    sheffield-hallam Download PDF for Control of electrodeposit properties of nickel and nickel alloy by pulse plating. (opens in a new tab)

  2. Electrochemical deposition of CIS films for photovoltaic applications

    … from a single bath using direct-current and pulse-plating deposition, at cathodic potential ranging -0.3V to -1.3V, with a thickness between 100-200nm. Electrochemical deposition mechanism results were correlated using Energy-Dispersive-X-ray Spectroscopy and X-Ray-Diffraction. …

    nus Repository record for Electrochemical deposition of CIS films for photovoltaic applications (opens in a new tab) Download file for Electrochemical deposition of CIS films for photovoltaic applications (opens in a new tab)

  3. Copper and tin electrodeposition from deep eutectic solvents using pulse current

    … studies are performed using direct current (DC) plating method. However, metal plated using this method often suffers from issues such as poor deposit quality and low Faradaic efficiency, which lead to the adoption of pulse plating method as an alternative. Currently, most studies of metal …

    strathclyde Repository record for Copper and tin electrodeposition from deep eutectic solvents using pulse current (opens in a new tab)

  4. Production of porous electrodes for fuel cells supports

    … Formation of highly porous Ni supports by electroplating through a microspheres template proved to be feasible. The catalyst was deposited on the porous Ni support by both pulse plating and electrospray methods. The structure of the Pt particles obtained by electroplating depended on the charge …

    greece Repository record for Production of porous electrodes for fuel cells supports (opens in a new tab)

  5. Electroplated titanium coatings

    … operating parameters for a titanium electroplating process based on a molten chloride (LiCl-KCl) bath. Studies of substrate oxide film reduction, the electro-reduction of divalent titanium, the nature of electrodeposits produced under various plating conditions, and the behaviour of the …

    the-open-u Download PDF for Electroplated titanium coatings (opens in a new tab)

  6. Design, modeling and fabrication of a copper electroplated MEMS, membrane based electric field sensor

    … for the sensor has been designed. The electroplating process as the most important fabrication step has been studied in detail prior to starting the fabrication of sensor. The process parameters for electroplating process, such as current amplitudes, duty cycle and frequency have been …

    manitoba Repository record for Design, modeling and fabrication of a copper electroplated MEMS, membrane based electric field sensor (opens in a new tab)

  7. Microstimulation and multicellular analysis: A neural interfacing system for spatiotemporal stimulation

    … Specifically, we developed a closed-loop electroplating strategy to monitor and control the morphology of surface coatings during deposition, and we implemented pulse-plating techniques as a means to produce robust, resilient microelectrodes that could withstand rigorous handling and harsh …

    gatech Repository record for Microstimulation and multicellular analysis: A neural interfacing system for spatiotemporal stimulation (opens in a new tab)

  8. Production and Characterization of Zn-Ni Nano-Composite Coatings Using Sol-Enhanced Electrodeposition Method

    … metal or alloy have been developed using electroplating to improve properties including corrosion and wear resistance, self-lubricating and high temperature stability. Typically, solid micro or nano sized powders are mixing into an electrolyte solution under agitation to produce nano/micro …

    auckland-ms Repository record for Production and Characterization of Zn-Ni Nano-Composite Coatings Using Sol-Enhanced Electrodeposition Method (opens in a new tab)

  9. Monolithic integration of high-aspect-ratio microstructures with CMOS circuitry

    … include thick photoresist processing, DC and pulse electroplating to form high-aspect-ratio microprobes, microprobe sharpening and developing a post-IC monolithic integration process. SU-8 is utilized for thick photoresist application. This work focuses on realization of a deep microrecess …

    lsu-thes Repository record for Monolithic integration of high-aspect-ratio microstructures with CMOS circuitry (opens in a new tab)

  10. Electrodeposition of FeCoNiCu quaternary system

    … multilayers were successfully fabricated with pulse plating and GMR value was reported for this electrodeposited system for the first time. A value of -6 % was achieved on rotating disk electrode (RDE) and this maximum occurred when the structure had no preferred crystal phase. Over 40% GMR has …

    lsu-thes Repository record for Electrodeposition of FeCoNiCu quaternary system (opens in a new tab)

  11. Liquid Cell Electron Microscopy With the Nanoaquarium: Radiation and Electrochemistry

    … electrode-electrolyte interface during electroplating, the onset of diffusive instabilities in electrodeposits, beam-mediated nucleation, growth, and dissolution of metallic nanoparticles, the nucleation and growth of nanobubbles, and the fundamentals of the electron-water interactions …

    penn Repository record for Liquid Cell Electron Microscopy With the Nanoaquarium: Radiation and Electrochemistry (opens in a new tab)

  12. Investigation on the Mechanism of Electrocodeposition and the Structure-Properties Correlation of Nickel Nanocomposites

    … the electrocodeposition (ECD) process from metal plating baths containing dispersed nanoparticles. By using this technique, a broad range of substrate sizes and shapes can be coated cost-effectively. However, the prediction of the amount as well the distribution of nanoparticles within the metal …

    qucosa-diss

  13. Electrodeposition of manganese/cobalt alloys for solid oxide fuel cell interconnect applications.

    … binary Mn/Co alloys deposition by DC and pulse plating. The dramatic difference of deposition potentials of Mn (−1.18V) and Co (−0.28V) makes it quite difficult to co-deposit two metals. Potentiodynamic polarization and cyclic voltammetry were conducted to characterize total reactions …

    wvu Repository record for Electrodeposition of manganese/cobalt alloys for solid oxide fuel cell interconnect applications. (opens in a new tab)

  14. Παλμική ηλεκτροαπόθεση και χαρακτηρισμός λεπτών φιλμ χαλκοπυριτικού CuInSe2

    … was carried out under constant (DC) or pulsed potential (PP); the influence of process parameters, such as the applied DC potential, pulse potential and related parameters (duty cycle, pulse period), bath composition, pH, deposition time, type of the substrate (Ti, Ni, FTO conductive …

    greece Repository record for Παλμική ηλεκτροαπόθεση και χαρακτηρισμός λεπτών φιλμ χαλκοπυριτικού CuInSe2 (opens in a new tab)

  15. Effect of pulsed current on the electrodeposition of chromium and copper

    This research was concerned with the effects of pulsed current on the electrodeposition of chromium and copper. In the case of the latter metal, a novel application has been studied and a theory proposed for the ability to improve throwing power by the joint use of organic additives and pulsed …

    aston Download PDF for Effect of pulsed current on the electrodeposition of chromium and copper (opens in a new tab)

  16. Electrodeposition of nickel-copper alloys and nickel-copper-alumina nanocomposites into deep recesses for MEMS

    Electrodeposition is an important component in the fabrication of micro electro mechanical systems (MEMS). Nickel is the most commonly used material to produce three dimensional microstructures and few material alternatives have been demonstrated. In this dissertation, electrodeposited Ni-Cu alloys …

    lsu-thes Repository record for Electrodeposition of nickel-copper alloys and nickel-copper-alumina nanocomposites into deep recesses for MEMS (opens in a new tab)

  17. Development of Flexible Lithium Sulfur Batteries Based on Laser-Induced Graphene

    … as seeds for electrodeposition and a reverse pulse plating (RPP) technique was also utilized to reduce the lithium protrusions that would eventually form dendrites and high irreversible capacity loss due to the high surface area for solid electrolyte interface (SEI) formation. Initial cycling …

    waterloo Repository record for Development of Flexible Lithium Sulfur Batteries Based on Laser-Induced Graphene (opens in a new tab)

  18. Μεταλλικές και σύνθετες ηλεκτρολυτικές επικαλύψεις ψευδαργύρου από όξινα θειικά λουτρά

    … of zinc(II) ions, under direct current (DC) and pulse direct current (PDC) plating conditions. The effect of electrolysis parameters (i.e., current density, electrolytic bath pH, pulse frequency and duty cycle) on the solid state structure (micro- and macrostructure) of the as-grown deposits was …

    greece Repository record for Μεταλλικές και σύνθετες ηλεκτρολυτικές επικαλύψεις ψευδαργύρου από όξινα θειικά λουτρά (opens in a new tab)

  19. Electrochemical deposition of nanocrystalline nickel-cobalt alloys using bath hydrodynamics

    … NC nature (i.e., grain size < 100 nm). Although pulse plating mode and the use of organic additives have been the preferred route to fabricate the NC eNiCo alloys using electrochemical deposition (ECD), however, the inclusion of precipitates such as sulfur atoms at grain boundaries (causes …

    freiburg-diss Repository record for Electrochemical deposition of nanocrystalline nickel-cobalt alloys using bath hydrodynamics (opens in a new tab)

  20. The effect of mass transport on deposit quality in copper electrowinning

    … cell while still producing smooth deposits. Pulsed plating with three rectangular waveforms was also examined A pulse-rest waveform with a 50% duty cycle gave a finer deposit morphology. Pulse-reverse and pulse-rest-reverse waveforms were also used but were inferior to the pulse-rest …

    must-thes Repository record for The effect of mass transport on deposit quality in copper electrowinning (opens in a new tab)

Page 1 of 2