Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 31 for “"Pump/motor"”.

  1. Investigation of digital pump/motor control strategies

    A pump is the heart of fluid power systems, it has a significant impact on the efficiency of many fluid power systems. Motors are the most common rotary actuators in fluid power systems. State-of-the-art pump/motor units can achieve efficiencies higher than 90% when operating at maximum …

    purdue-thes Repository record for Investigation of digital pump/motor control strategies (opens in a new tab)

  2. Machinery Imbalance Failure Prediction Based on Pump – Motor Vibration Readings

    … in vibration analysis to detect imbalances in pump-motor units, a critical issue that accelerates equipment wear and increases maintenance costs. Traditional maintenance methods, such as scheduled inspections, often fail to identify faults early, leading to significant operational disruptions, …

    rit Repository record for Machinery Imbalance Failure Prediction Based on Pump – Motor Vibration Readings (opens in a new tab)

  3. The performance and efficiency of hydraulic pumps and motors.

    … the performance and efficiency of hydraulic pumps and motors, both with experiments and modeling. A pump and motor test stand is constructed to measure the efficiency of an axial piston swashplate pump/motor unit. A regenerative loop hydraulic system is used to reduce the power requirements …

    umn Repository record for The performance and efficiency of hydraulic pumps and motors. (opens in a new tab)

  4. Treatment-Specific Approaches for Analysis and Control of Left Ventricular Assist Devices

    … Ventricular Assist Device (LVAD) is a mechanical pump that helps patients with heart failure conditions. This rotary pump works in parallel to the ailing heart and provides an alternative path for blood flow from the weak left ventricle to the aorta. The LVAD is controlled by the power supplied to …

    ucf Repository record for Treatment-Specific Approaches for Analysis and Control of Left Ventricular Assist Devices (opens in a new tab)

  5. Microgrid Laboratory Wind Energy Integration

    … the islanded microgrid by turning on and off the pump motor load for one second and by adding a torque load. Without the wind energy system, the system frequency drops below 59.7Hz causing the microgrid to collapse. However, with the wind energy system, the microgrid frequency is kept above 59.7Hz …

    calpoly Repository record for Microgrid Laboratory Wind Energy Integration (opens in a new tab)

  6. Achieving Efficient Control of Hydraulic Systems Using On/Off Valves

    … due in part to inefficient components, such as pumps and motors, and partially due to the typical method of control, which uses throttling valves to place restrictions in the flow path to dissipate excess power as heat. Several approaches to reducing throttling losses have been studied, such as …

    umn Repository record for Achieving Efficient Control of Hydraulic Systems Using On/Off Valves (opens in a new tab)

  7. Modeling and experimental evaluation of a load-sensing and pressure compensated hydraulic system

    … their loads by way of valve adjustment in a pump-valve control configuration. Most of these systems have low energy efficiency as a consequence of pressure losses across throttle valves. Much of the energy is converted into heat energy which can have determinantal effects on component life …

    sask Repository record for Modeling and experimental evaluation of a load-sensing and pressure compensated hydraulic system (opens in a new tab)

  8. A Numerical Model That Predicts Lubrication Fluid Film Thickness and Friction in the Piston-Cylinder Interface of Hydraulic Piston Pumps/Motors

    Hydraulic piston pumps and motors are commonly used in low-speed-high-torque (LSHT) applications. Side load is always present in such piston-cylinder geometry which causes friction and wear. Sufficient lubrication in the piston-cylinder interface is essential to reduce wear and friction and …

    umn Repository record for A Numerical Model That Predicts Lubrication Fluid Film Thickness and Friction in the Piston-Cylinder Interface of Hydraulic Piston Pumps/Motors (opens in a new tab)

  9. Analysis of Large Synchronous Motors Used In Hydro Pump Storage Plants.

    … the past ten years, a widespread interest in pump storage peaking plants has developed in the United States. In particular during the past few years, The Southern Company has become very interested in this peaking method having one plant under construction and several others being studied. …

    uab Repository record for Analysis of Large Synchronous Motors Used In Hydro Pump Storage Plants. (opens in a new tab)

  10. The techno-economical impact of reducing chilled water usage on a deep level gold mine

    … operations. Operating these plants as well as pumping the used water back to surface result in significant costs. To reduce this operating cost of a deep level mine, an investigation into different areas of the operations was done to determine whether chilled water usage could be significantly …

    nwu-za Repository record for The techno-economical impact of reducing chilled water usage on a deep level gold mine (opens in a new tab)

  11. Improving performance of an energy efficient hydraulic circuit

    … high dynamic performance and high efficiency. A pump-controlled hydraulic motor system was used as the basis of the study because of its high circuit efficiency. This is primarily because there is no power loss between the pump and motor. To improve the dynamic response of the pump, a DC motor …

    sask Repository record for Improving performance of an energy efficient hydraulic circuit (opens in a new tab)

  12. Simulation of Aortic Valve Dynamics during Left Ventricular Support

    Implantable Rotary Blood Pumps (IRBPs) for the left ventricle (LV) have become a viable treatment and long-term option for heart failure (HF) patients. In addition, development of valve abnormalities after Left Ventricular Assist Device (LVAD) implantation is common among patients with advanced HF, …

    unsw Repository record for Simulation of Aortic Valve Dynamics during Left Ventricular Support (opens in a new tab)

  13. Experimental Wear Testing Of The Piston In An Offset Crank-Slider Hydraulic Pump

    Hydraulic piston pumps and motors are frequently utilized in low-speed-high-torque(LSHT) applications. In such piston-cylinder geometries, side load is a prevalent issue that leads to friction and wear. It’s crucial to ensure adequate lubrication at the pistoncylinder interface to minimize wear and …

    umn Repository record for Experimental Wear Testing Of The Piston In An Offset Crank-Slider Hydraulic Pump (opens in a new tab)

  14. An expert system for preliminary selection of hydrostatic transmission components

    … selection and sizing of the major components-- pump, motor, and final drive-- of a hydrostatic transmission. Four types of options were considered. For the first, output speed and torque are both constant. For the second, horsepower output is constant at different speeds. For the third type, the …

    vt Repository record for An expert system for preliminary selection of hydrostatic transmission components (opens in a new tab)

  15. Computational Investigation of Cavitation Performance and Heat Transfer in Cryogenic Centrifugal Pumps with Helical Inducers

    … and cooling mechanism of a cryogenic submerged pump motor, and cavitation behavior of a cryogenic pump are investigated. Cryogenic pumps for Liquefied Natural Gas (LNG) applications are unique in design with respect other industrial pump applications. The two distinct features of the cryogenic …

    unr Repository record for Computational Investigation of Cavitation Performance and Heat Transfer in Cryogenic Centrifugal Pumps with Helical Inducers (opens in a new tab)

  16. Modelling and control of a hydrostatic transmission for a load-haul-dump underground-mining machine

    … of Burlington, Ontario. The machine uses four pump-motor hydrostatic closed loops to power its four wheels. Speed regulation is required on such a machine in order to achieve the differential effect needed when the machine turns, as well as to maintain consistent wheel speeds and efficiency …

    ubc Repository record for Modelling and control of a hydrostatic transmission for a load-haul-dump underground-mining machine (opens in a new tab) Download PDF for Modelling and control of a hydrostatic transmission for a load-haul-dump underground-mining machine (opens in a new tab)

  17. An Inventory of Public Water Supply Wells Owned and Operated by Orange County, Florida

    … drilling of the well, static water level and pumping tests, chemical and bacteriological quality of the water, and most recent pump, motor and auxiliary engine. This information was recorded on a date form for each well, with the well geographically categorized into five areas throughout the …

    ucf Repository record for An Inventory of Public Water Supply Wells Owned and Operated by Orange County, Florida (opens in a new tab)

  18. An industrial programmable controller as a control and data acquisition development system for a research extruder and spinline

    … and spinline. Steps tests were made in take-up motor speed, screw speed, gear pump motor speed, and die inlet melt tempera ture set point. For each step test the fiber diameter and die inlet melt pressure responses were collected. The response data from these tests are presented.</p>

    ut-knoxville Repository record for An industrial programmable controller as a control and data acquisition development system for a research extruder and spinline (opens in a new tab)

  19. High Speed Rotary PWM On/Off Valves for Digital Control of Hydraulic Pumps and Motors

    … control of fixed displacement hydraulic pumps and motors. On/off valves, the hydro-mechanical equivalent of transistors, enable the application of digital control techniques found in electrical systems to hydraulics. These techniques, such as pulse-width-modulation (PWM), have the …

    umn Repository record for High Speed Rotary PWM On/Off Valves for Digital Control of Hydraulic Pumps and Motors (opens in a new tab)

Page 1 of 2