Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"Pumping pressure"”.

  1. Minimally invasive assessment of lymphatic pumping pressure using near infrared imaging

    … collecting lymphatic vessels. In this study, a pressure cuff system was fabricated and coupled with an existing functional near infrared (NIR) imaging system to measure the overall pumping pressure of the lymphatic vessels of a rat tail. In addition to adapting the system for use on rodents, …

    gatech Repository record for Minimally invasive assessment of lymphatic pumping pressure using near infrared imaging (opens in a new tab)

  2. Study of the effects of pumping pressure on the properties of fresh concrete

    … the labaratory to simulate the effect of field pumping of concrete and two, to conduct some preliminary tests to investigate the feasibility of the testing apparatus.</p><p>Pumping of concrete has been practiced in the U.S.A. since 1930. The behaviour of concrete in a pipeline has not been …

    njit Repository record for Study of the effects of pumping pressure on the properties of fresh concrete (opens in a new tab)

  3. Low-Power, Low-Voltage Electroosmotic Actuator for an Implantable Micropumping System Intended for Drug Delivery Applications

    … liquid across a membrane to deflect the pumping diaphragms in a reciprocating manner. In the study, the membrane made of porous nanocrystalline silicon (pnc-Si) tens of nanometers in thickness was used as the promising EO generator with low power consumption and small package size. This …

    rit Repository record for Low-Power, Low-Voltage Electroosmotic Actuator for an Implantable Micropumping System Intended for Drug Delivery Applications (opens in a new tab)

  4. Experimental and Computational Investigation of the Effect of Swirling Flows on an Ejector With Cut Angled Entraining Diffuser

    … of predicting the overall ejector performance (pumping, pressure recovery, velocity and temperature distributions at the diffuser outlet). The experimental results showed that the inlet swirl had similar effect on the Ejector with Cut Angled Diffuser to the Ejector with Full Diffuser. In …

    queens Repository record for Experimental and Computational Investigation of the Effect of Swirling Flows on an Ejector With Cut Angled Entraining Diffuser (opens in a new tab)

  5. Microvascular composites as a multifunctional material for electric vehicles

    … offers optimal thermal performance at high pumping pressure (>100 kPa), while the bifurcating network and a computationally optimized parallel network offer slightly reduced thermal performance at much lower pumping pressure (<10 kPa). In a collaborative effort, gradient-based optimization …

    uiuc Repository record for Microvascular composites as a multifunctional material for electric vehicles (opens in a new tab)

  6. Water Demand in the Chicago Metropolitan Area

    … the ground water level has fallen due to pumping pressure. Together, these constraints on water supply could limit economic and population growth in the Chicago Metropolitan area. There are two alternatives to meet the area's growing demand: pumping water from distant sources, or using the …

    uiuc Repository record for Water Demand in the Chicago Metropolitan Area (opens in a new tab)

  7. Pipe Flow Characteristics of Bentonite Based Grouts : A Pumping Perspective

    … has always been an option, but the higher the pressure and flow rate a pump is capable of producing, the more the pump will cost. The loop installer will want to keep cost to a minimum in order to keep cost to the customer more competitive. Therefore, being able to properly size a grout pump …

    sdstate Repository record for Pipe Flow Characteristics of Bentonite Based Grouts : A Pumping Perspective (opens in a new tab)

  8. Performance of Air-Air Ejectors with Multi-ring Entraining Diffusers

    … Ejector performance was quantified in terms of pumping, pressure recovery, wall temperature and velocity and temperature distribution at the diffuser exit. The experiments were conducted on one cold flow wind tunnel and one hot gas wind tunnel. In total, eight ejector systems were tested for …

    queens Repository record for Performance of Air-Air Ejectors with Multi-ring Entraining Diffusers (opens in a new tab)

  9. Etude de l’effet de la couche limite sur les profils de vitesse du béton pompé

    … significantly influencing the relation between pumping pressure and discharge rate. The concrete rheology is often characterized by a rheological law in stationary conditions (time independent), giving the evolution of shear stresses as a function of shear rate. In case of traditional concrete, …

    ghent Repository record for Etude de l’effet de la couche limite sur les profils de vitesse du béton pompé (opens in a new tab)

  10. MINIATURE, SUBMERSIBLE ELECTROMAGNETIC PUMPS OF MOLTEN LEAD AND SODIUM FOR GEN-IV NUCLEAR REACTORS DEVELOPMENT

    … of hydrogen fuel. In addition, the low vapor pressure of these liquids eliminates the need for a pressure vessel and instead operates slightly below ambient pressure. A primary issue with the uses of these coolants is their compatibility with nuclear fuel, cladding and core structure materials …

    unm Repository record for MINIATURE, SUBMERSIBLE ELECTROMAGNETIC PUMPS OF MOLTEN LEAD AND SODIUM FOR GEN-IV NUCLEAR REACTORS DEVELOPMENT (opens in a new tab)

  11. A Study of Subsonic Air-Air Ejectors with Short Bent Mixing Tubes

    … the nozzle exit and at the exit of the ejector. Pumping, pressure rise and total efficiency of the ejector were studied with respect to the bend angle, swirl angle and the primary to secondary flow temperature ratio. A commercial CFD code was used to evaluate the effectiveness of commercial CFD …

    queens Repository record for A Study of Subsonic Air-Air Ejectors with Short Bent Mixing Tubes (opens in a new tab)

  12. Rheology of high performance shotcrete

    … were obtained between rheological properties and pumping pressure, build-up thickness and compaction of shotcrete. With a new parameter, the fresh concrete aging rate, these relationships are used in a model which predicts pumpability and shootability. Production of high performance shotcrete can …

    ubc Repository record for Rheology of high performance shotcrete (opens in a new tab) Download PDF for Rheology of high performance shotcrete (opens in a new tab)

  13. Pumping behaviour of modern concretes – Characterisation and prediction

    Pumping is the most efficient transportation and placing method for concrete. Despite the immense progress in the field of concrete technology in the last years, so far there are still neither official regulations nor verified theoretical foundations to be used for the assessment and accurate …

    qucosa-diss

  14. MICROCHANNEL COOLING OF FLIP CHIPS

    … are carried out on critical elements including pressure drop, hydraulic diameter, aspect ratio, ratio of wall thickness to channel width and coolant inlet temperature with the aid of a self-developed computer code which is finally validated on the adequate and effective estimation of the …

    nus Repository record for MICROCHANNEL COOLING OF FLIP CHIPS (opens in a new tab) Download file for MICROCHANNEL COOLING OF FLIP CHIPS (opens in a new tab)

  15. Resolving DNA Using A Bare Open Narrow Capillary without Sieving Matrix

    … open-capillary EOP units in series to boost the pressure, and a pumping pressure of up to 21.4 MPa was achieved. The performance of the constructed ten-unit EOP was evaluated by applying it to drive high performance liquid chromatography for separations of peptides or proteins. We then explored …

    oklahoma-thes Repository record for Resolving DNA Using A Bare Open Narrow Capillary without Sieving Matrix (opens in a new tab)

  16. Analysis of Emissions Profiles of Hydraulic Fracturing Engine Technologies

    … ran with five varying parameters: shale play, pumping pressure, fluid flow rate, and Tier 2 and Tier 4 Dual Fuel substitution ratios. Each case assumed the same amount of pumping hours per day at 17 and only the Marcellus case differed in stage length. Each of the cases are equivalent to one …

    wvu Repository record for Analysis of Emissions Profiles of Hydraulic Fracturing Engine Technologies (opens in a new tab)

  17. Geomechanical Coupled Modeling of Shear Fracturing in Non-Conventional Reservoirs

    … of the growing failed region require increasing pumping pressure with time for further failed zone growth, even though the injected fluid is of low viscosity (water). Further, under high injection pressure, an efficient fracture elasto-plastic constitutive model developed drives both maximum and …

    calgary Repository record for Geomechanical Coupled Modeling of Shear Fracturing in Non-Conventional Reservoirs (opens in a new tab)

  18. Ztráty v potrubí průtokem směsných substrátů.

    Úvodní část této práce je věnována teoretickému popisu, principu a stavbě bioplynových stanic, které vyžadují řešení celé řady rozdílných problémů. Jeden specifický blok těchto problémů je doprava směsných substrátů různých koncentrací, jak v areálu bioplynové stanice tak mimo něj. Převážná část …

    brno-tech Repository record for Ztráty v potrubí průtokem směsných substrátů. (opens in a new tab)

  19. Active rheology control of cementitious materials : numerical and experimental pumping investigation

    … different process stages. During transportation, pumping, formwork casting or extrusion the concrete requires to be highly flowable, contrary to directly after casting, 3D printing, shotcreting etc. requiring it to be as little flowable and to set as fast as possible. In order to overcome issues …

    ghent Repository record for Active rheology control of cementitious materials : numerical and experimental pumping investigation (opens in a new tab)

  20. Experimental and Numerical Investigations of Annular Swirling Primary Flow in a Short Subsonic Air-Air Ejector with Entraining Diffuser

    … profile. The core separation also changed the pressure recovery along the device axis and this leads to a rebalancing of the pumping at the mixing tube inlet and entraining diffuser. This affected overall ejector pumping, back pressure and film cooling effectiveness. Numerical studies were …

    queens Repository record for Experimental and Numerical Investigations of Annular Swirling Primary Flow in a Short Subsonic Air-Air Ejector with Entraining Diffuser (opens in a new tab)