Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"Punching Shear Capacity"”.

  1. Characterization of Punching Shear Capacity of Thin Uhpc Plates

    … and contained no reinforcing steel to resist shear. The lack of steel reinforcement allowed for the possibility of a punching shear failure to occur from the application of a point load such as a wheel tire patch load. The model and optimized section served as the foundation for this research, …

    vt Repository record for Characterization of Punching Shear Capacity of Thin Uhpc Plates (opens in a new tab)

  2. Flexural, Shear, and Punching Shear Capacity of Three 48-Year-Old Prestressed Lightweight Concrete Double-Tee Bridge Girders

    … prestressing of the strands, the flexural and shear capacities of the girders, and the punching shear capacity of the reinforced concrete deck. The results of these tests were compared to the values calculated using methods outlined in the 2012 American Association of State Highway and …

    utahstate Repository record for Flexural, Shear, and Punching Shear Capacity of Three 48-Year-Old Prestressed Lightweight Concrete Double-Tee Bridge Girders (opens in a new tab)

  3. Punching shear capacity of flat slab-column junctions (a study by 3-D non-linear finite element analysis)

    This thesis presents a study of punching shear capacity of flat slab-column junctions. A three dimensional non-linear finite element program based on 20 node isoparametric solid element was used for the investigation. The non-linear 3-D elastic isotropic model proposed by Motsovos was used to …

    glasgow Download PDF for Punching shear capacity of flat slab-column junctions (a study by 3-D non-linear finite element analysis) (opens in a new tab)

  4. Response Characterization And Prediction Of Uhpc Flat Plates Subjected To Perpendicular Axisymmetric Concentrated Loads

    … prediction of the complete flexural response and punching shear capacity of UHPC flat plates thus addressing two fundamental limit states related to the design of UHPC flat plates. Guidance is provided for how to convert continuous flat plates supported by discrete columns into isolated plates …

    wayne-thes Repository record for Response Characterization And Prediction Of Uhpc Flat Plates Subjected To Perpendicular Axisymmetric Concentrated Loads (opens in a new tab)

  5. Behaviour of GFRP-RC slab-column edge connections with openings

    … However, these systems are vulnerable to brittle punching shear failure, particularly in edge connections subjected to combined shear and unbalanced moment. The presence of slab openings near the column further disrupts load transfer, reduces the effective shear-resisting area and increases stress …

    manitoba Repository record for Behaviour of GFRP-RC slab-column edge connections with openings (opens in a new tab)

  6. Flexure And Punching Shear Behavior Of Uhpc Elements Post-Tensioned With Unbonded Tendons

    ABSTRACTFLEXURE AND PUNCHING SHEAR BEHAVIOR OF UHPC ELEMENTS POST-TENSIONED WITH UNBONDED TENDONS by Mehmet Dogu August 2021 Advisor: Dr. Fatmir Menkulasi Major: Civil and Environmental Engineering (Structural Engineering) Degree: Doctor of Philosophy Procedures for predicting the flexural …

    wayne-thes Repository record for Flexure And Punching Shear Behavior Of Uhpc Elements Post-Tensioned With Unbonded Tendons (opens in a new tab)

  7. Destructive Testing of Composite Precast Concrete Deck Panels and Built-Up Steel Plate Girders

    … steel plate girders through the use of Nelson shear studs. Additionally, the precast panels span the transverse direction and as such have a transverse joint. Historic data has shown the transverse joint to be an area of concern for the functionality of the structural system. Flexure, beam …

    utahstate Repository record for Destructive Testing of Composite Precast Concrete Deck Panels and Built-Up Steel Plate Girders (opens in a new tab)

  8. Evaluation of the effects of in-plane lateral restraint and reinforcement ratio on the punching capacity of flat slab column specimens

    … progressive collapses normally resulting from punching shear failures at the slab column connections. The goal of this research is to investigate the behavior of slab column specimens in a setup that more closely resembles a complete structure by applying in-plane lateral restraints. In a …

    missouri Repository record for Evaluation of the effects of in-plane lateral restraint and reinforcement ratio on the punching capacity of flat slab column specimens (opens in a new tab)

  9. Punching shear strength of reinforced concrete slab.

    This thesis presents the results of punching shear tests performed on a 2 x 2 bay continuous slab with/and without supplementary supports. On the basis of these tests, the code method of calculating the ultimate strength of interior, edge and corner column connections of flat slab were …

    ottawa-retro Repository record for Punching shear strength of reinforced concrete slab. (opens in a new tab)

  10. An investigation into the punching shear failure in R.C. waffle slabs subjected to concentrated load

    … when subjected to concentrated loads. The punching shear failure inside waffle slabs has not been thoroughly investigated and this is also reflected in the current code of practice, which, in the main, relates the design of punching shear in waffle slabs to that in solid slabs. In this …

    abertay Repository record for An investigation into the punching shear failure in R.C. waffle slabs subjected to concentrated load (opens in a new tab) Download PDF for An investigation into the punching shear failure in R.C. waffle slabs subjected to concentrated load (opens in a new tab)

  11. Experimental and analytical evaluation of disproportionate collapse flat-plate buildings

    … portion of it. This progression can occur if the punching shear strength of the surrounding connections is not sufficient. In order to make the most accurate determination of the potential for disproportionate collapse of flat plate structures, this research seeks to accurately evaluation the …

    missouri Repository record for Experimental and analytical evaluation of disproportionate collapse flat-plate buildings (opens in a new tab)

  12. Punching Shear and Flexural Capacity Modeling and Experimental Testing of Bridge Slab Segments

    Punch-through shear failure is a common bridge deck damage mode in which a high concentrated load, typically from the wheel of a heavy vehicle, induces a localized shear failure conducted through the full-depth of the slab. This research project discussed hereafter investigated the structural …

    tamu Repository record for Punching Shear and Flexural Capacity Modeling and Experimental Testing of Bridge Slab Segments (opens in a new tab) Embargoed until 2027-12-01

  13. Punching Shear and Flexural Capacity Modeling and Experimental Testing of Bridge Slab Segments

    Punch-through shear failure is a common bridge deck damage mode in which a high concentrated load, typically from the wheel of a heavy vehicle, induces a localized shear failure conducted through the full-depth of the slab. This research project discussed hereafter investigated the structural …

    tamu Repository record for Punching Shear and Flexural Capacity Modeling and Experimental Testing of Bridge Slab Segments (opens in a new tab) Embargoed until 2027-12-01

  14. Punching Shear and Flexural Capacity Modeling and Experimental Testing of Bridge Slab Segments

    Punch-through shear failure is a common bridge deck damage mode in which a high concentrated load, typically from the wheel of a heavy vehicle, induces a localized shear failure conducted through the full-depth of the slab. This research project discussed hereafter investigated the structural …

    tamu Repository record for Punching Shear and Flexural Capacity Modeling and Experimental Testing of Bridge Slab Segments (opens in a new tab) Embargoed until 2027-12-01

  15. Punching Shear and Flexural Capacity Modeling and Experimental Testing of Bridge Slab Segments

    Punch-through shear failure is a common bridge deck damage mode in which a high concentrated load, typically from the wheel of a heavy vehicle, induces a localized shear failure conducted through the full-depth of the slab. This research project discussed hereafter investigated the structural …

    tamu Repository record for Punching Shear and Flexural Capacity Modeling and Experimental Testing of Bridge Slab Segments (opens in a new tab) Embargoed until 2027-12-01

  16. An experimental study and finite analysis of punching shear failure in steel fibre-reinforced concrete ground -suspended floor slabs

    … effect of using steel fibre-reinforcement on the punching shear behaviour of ground-suspended slabs with internal columns. The main objectives of this research were to develop a constitutive model for steel fibre-reinforcement (SFRC), to study experimentally the punching shear behaviour of SFRC …

    liverpool-jm Repository record for An experimental study and finite analysis of punching shear failure in steel fibre-reinforced concrete ground -suspended floor slabs (opens in a new tab) Download PDF for An experimental study and finite analysis of punching shear failure in steel fibre-reinforced concrete ground -suspended floor slabs (opens in a new tab)

  17. Punching Shear Retrofit Method Using Shear Bolts for Reinforced Concrete Slabs under Seismic Loading

    … this type of structures can be subject to punching-shear failure in the slab-column connections. Without shear reinforcement, the slab-column connection can undergo brittle punching failure, especially when the structure is subject to lateral loading in seismic zones. The shear bolts are a …

    waterloo Repository record for Punching Shear Retrofit Method Using Shear Bolts for Reinforced Concrete Slabs under Seismic Loading (opens in a new tab)

  18. Performance evaluation of FRP bridge deck under shear loads

    Shear behavior of glass fiber reinforced polymer (FRP) composite coupons, components, and systems is studied under torsional shear, in-plane shear, racking shear, out-of-plane shear, punching shear, and shear of web-flange junction. In addition, local deflection including web buckling of different …

    wvu Repository record for Performance evaluation of FRP bridge deck under shear loads (opens in a new tab)

  19. Experimental and analytical investigations of concrete bridge decks with structural FRP Stay-in-Place forms

    … a numerical model was developed to predict punching shear failure based on the theory of plates and shells. Experimental testing was conducted on two FRP SIP form configurations, namely flat plates with T-shape stiffeners and corrugated plates, and used a variety of different detailing and …

    queens Repository record for Experimental and analytical investigations of concrete bridge decks with structural FRP Stay-in-Place forms (opens in a new tab)

Page 1 of 2