Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 160 for “"Pure shear"”.
-
Behavior of FRP Strengthened Concrete Panel Elements Subjected to Pure Shear
… a tremendous effort on studies related to FRP shear strengthening of RC structures, the state of knowledge shows that the problem is not fully resolved and there are still controversies in the prediction of shear behavior in the presence of FRP. To predict the increase in shear capacity due to …
-
The behaviour of granular material in pure shear, direct shear and simple shear
… leading to a significant overestimation of the shear strength. In direct shear tests, the shear strain becomes highly concentrated in the mid-plane of the sample during the test. Although the stress distribution within the specimen is heterogeneous, the evolution of the stress ratio inside the …
-
Theoretical analysis of channel type anchors subjected to pure tensile or pure shear loads
… is relatively new. Although the pullout or shear capacity of single short anchor bolts or welded studs can be reasonably predicted using the concrete failure cone method, a similar pullout or shear capacity prediction relationship has not been developed for channel anchors with more them one …
-
The magnetoelastic contributions to the pure shear wave elastic constants of single crystal dysprosium
The pure shear wave elastic constants, C and Cgg, was measured with echo overlap method as functions of the applied magnetic field. The elastic constants were measured in applied fields of to 17.5 KOe and temperatures between 18°K and 3°K. Different directions of applied field and polarization of …
-
An investigation of the static stability of corrugated rectangular plates loaded in pure shear
207 leaves : ill. ; 28 cm.
-
Mechanical and Architectural Characteristics of Plain-Weave Fabric under Bi-axial and Pure Shear Loading
… Coulomb's friction model, is proposed for the pure shear loading case. In developing the constitutive models, to understand the detailed deformation of the fabric unit-cell, non-linear finite element analysis has been extensively used in this work. Two truss models for the unit-cell have been …
-
Generalized Couette Flow of a Power-Law Fluid in an Annulus
… in an annulus is analyzed. Cases ranging from pure shear flow to flow through an annulus with stationary walls are considered. Since the fluid does not exhibit linear characteristics, superposition of the solutions for pure shear (drag) flow and flow through an annulus with stationary walls can …
-
Strain path partitioning during forceful emplacement of the Papoose Flat pluton, Inyo Mountains, CA
… units reveals large components of either pure shear or simple shear deformation. C-axis fabric analysis of quartz tectonites within veins in the gneissic border of the pluton, and quartzites within the pluton aureole, indicate that quartz tectonites deformed under approximately simple …
-
Structural analysis of a similar-type fold : Booster Lake, Manitoba
… of strain are considered possible: heterogeneous pure shear; homogeneous flattening superimposed on a flexural fold; flexural folding followed by heterogeneous or homogeneous pure shear and heterogeneous simple shear; and heterogeneous or homogeneous pure shear following by heterogeneous simple …
-
Investigation of magnetic and magnetoelastic properties of novel materials involving cobalt ferrite and terbium silicon germanium systems
<p>The effects of pure shear stress on magnetization in nickel have been studied with a view to developing a theoretical understanding of the Matteucci effect, which is of great technological interest in the search for viable magnetic torque sensors. The effects of pure shear stress on a planar …
-
Finite Opening of Propagating Shear Cracks
Molecular Dynamics (MD) simulations of shear-dominated crack propagation by Abraham and Gao (2000) showed that there was finite crack opening when the crack propagated at a sub-Rayleigh speed while the crack opening became negligible when the crack propagated faster than the shear wave speed. On …
-
Middle Crustal Ductile Deformation Patterns in Southern Tibet: Insights from Vorticity Studies in Mabja Dome
… structural depth from top-north and top-south shear to solely top-south shear. Along the northernmost transects, Wm in schists and orthogneisses range from 0.52–0.84 (63–36% pure shear). Wm for quartzites ranges from 0.9–0.99 (27–1% pure shear). Deformation temperatures increase from ~450 °C in …
-
The effect of residual thermal stresses on the viscoelastic behavior of adhesively bonded joints
… in-situ using properties obtained from a pure shear test geometry. Four candidate adhesive test geometries were studied both analytically and experimentally in terms of accurate shear property determination and realistic adhesive bond simulation. The thick adherend joint was chosen as the …
-
Design, manufacturing and testing of hoop wound tubular in-plane shear specimens.
… test methods used to determine in-plane shear properties. Many of these methods are criticized for their inability to produce a pure shear state in the test region. Tubular in-plane shear specimens, however, are generally accepted as the only specimens which do (at least theoretically) …
-
Behavior of web elements with openings subjected to bending, shear and the combination of bending and shear
… elements with or without openings subjected to pure bending, pure shear, and a combination of bending and shear. Industry standard C-sections were tested to gain an understanding of the effect of openings on web on the load-carrying capacity. The current design criteria for cold-formed steel …
-
Strain in Ordovician and Devonian shales from the Massanutten Synclinorium: implications for fold development and tectonic history
… minor folding involving both flexural slip and pure shear. Curved fringes, straight fringe segments separated by sharp curvatures and multiple sets of fringes indicate that increments of pure shear were interspersed with continuous to episodic limb rotations accommodated by flexural slip. …
-
Seismic Design Of Pipe-Pin Connections In Concrete Bridges
… bridges to eliminate moments while transferring shear and axial loads from integral bridge bent caps to reinforced concrete columns. The hinges consist of a steel pipe that is anchored in column with a protruded segment that extends into the bent cap. In the absence of experimental and analytical …
-
Improving flow-induced hemolysis prediction models.
… model. This model was developed only for laminar pure shear flow within a limited range of exposure time. Subsequently, modified versions of this model have been developed to be used for more complex flows. Many of these modified models assume that hemolysis scales with a resultant, scalar stress …
-
The deformational history of the south central portion of the Munro Lake greenstone belt, northern Manitoba
… parallel to the s1 foliation plane, and minor shear folds (f1') were developed in bedding (s0) with the s1 foliation axial planar to them. The deformation during D1 may have been the result of pure shear accompanied by recrystallization and followed by passive slip (simple shear) or it may have …
Page 1 of 8