Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 30 for “"Purge Flow"”.

  1. The Effect of Mainstream Turbulence on Turbine Blade Platform Cooling with Simulated Swirl Purge Flow

    … injection hole plates produces swirl motion of purge flow, which makes three different swirl ratios of 0.4, 0.6 and 1.0. Pressure sensitive paint (PSP) technique is used to obtain detailed film cooling distribution on blade platform. The inlet Reynolds number is 250,000, and coolant to …

    tamu Repository record for The Effect of Mainstream Turbulence on Turbine Blade Platform Cooling with Simulated Swirl Purge Flow (opens in a new tab)

  2. Aerodynamics of a High-Speed Low-Pressure Turbine Cascade with Unsteady Wakes and Purge Flow

    … air system connected to a cavity slot injects purge flows upstream of the cascade. Time-averaged measurements of the midspan inlet and outlet flowfield and blade loading were performed to characterize the inlet boundary conditions and cascade performance. The blade aerodynamics were compared …

    liege Repository record for Aerodynamics of a High-Speed Low-Pressure Turbine Cascade with Unsteady Wakes and Purge Flow (opens in a new tab) Download PDF for Aerodynamics of a High-Speed Low-Pressure Turbine Cascade with Unsteady Wakes and Purge Flow (opens in a new tab)

  3. Influence of Purge Flow Swirl and Passage Discrete Hole Injection Angle on Turbine Blade Endwall Cooling

    … challenge due to the complex secondary flow structures within blade passages. Purge flow coolant, which passes through the gap between the stator and rotor, and discrete cooling holes, which are positioned strategically within the coolant passage, are often utilized together to provide …

    umn Repository record for Influence of Purge Flow Swirl and Passage Discrete Hole Injection Angle on Turbine Blade Endwall Cooling (opens in a new tab)

  4. The Influence of Simulated Purge Flow on the Secondary Flow of a Low-Speed Turbine Cascade

    … the understanding of turbine near endwall flows, termed secondary flows. Of particular interest were the loss generation and energy dissipation mechanisms present within the turbine blade row. Point measurements of the downstream pressure fields for different cascade configurations were …

    carleton Repository record for The Influence of Simulated Purge Flow on the Secondary Flow of a Low-Speed Turbine Cascade (opens in a new tab)

  5. Experimental Study of the Heat Transfer on a Squealer Tip Transonic Turbine Blade with Purge Flow

    The objective of this work is to examine the flow structure and heat transfer distribution of a squealer tip rotor blade with purge flow cooling and provide a comparison with a basic flat tip rotor blade without purge flow cooling, under transonic conditions and high inlet free stream turbulence …

    vt Repository record for Experimental Study of the Heat Transfer on a Squealer Tip Transonic Turbine Blade with Purge Flow (opens in a new tab)

  6. Aerodynamics of a Transonic Turbine Vane with a 3D Contoured Endwall, Upstream Purge Flow, and a Backward-Facing Step

    … a non-axisymmetric endwall contour and upstream purge flow on the secondary flow of an inlet guide vane. Three cases were tested in a transonic wind tunnel with an exit Mach number of 0.93-a flat endwall with no upstream purge flow, the same flat endwall with upstream purge flow, and a 3D …

    vt Repository record for Aerodynamics of a Transonic Turbine Vane with a 3D Contoured Endwall, Upstream Purge Flow, and a Backward-Facing Step (opens in a new tab)

  7. Turbine blade platform film cooling with simulated stator-rotor purge flow with varied seal width and upstream wake with vortex

    … the quantity of injected air, and the secondary flows near the platform. The purpose of this study was to measure the effect of the upstream vane or stator on this type of platform cooling, as well as the effect of changes in the width of the gap. Film cooling effectiveness distributions were …

    tamu Repository record for Turbine blade platform film cooling with simulated stator-rotor purge flow with varied seal width and upstream wake with vortex (opens in a new tab)

  8. Purge And Secondary Flow Interaction Control By Means Of Platform Circumferential Contouring

    … an attempt to reduce the losses produced by the purge flow in a turbine stage by incorporating circumferential platform contouring. Two contours are proposed and compared against a baseline at different levels of swirl. The computational simulations were performed using a RANS three-dimensional …

    ucf Repository record for Purge And Secondary Flow Interaction Control By Means Of Platform Circumferential Contouring (opens in a new tab)

  9. Investigation of Disc Cavity Sealing Efficiency Using CFD

    … Traditionally, pressurized cooling gas known as, Purge gas, is bled from compressor stage to seal the cavity. The influence of purge - mainstream density ratio (DR), plays a vital role in efficient sealing of the cavity and holds significant practical implications for future engine designers. …

    chalmers Repository record for Investigation of Disc Cavity Sealing Efficiency Using CFD (opens in a new tab)

  10. High pressure turbine blade platform cooling and feed architecture

    … systems to be tested and representative leakage flows to be reproduced.</p> <p>Two novel platform cooling systems were developed, using low-order numerical models, which utilise internal cooling features embedded directly into the platform surface. These systems are: a convective cooling passage …

    oxford Repository record for High pressure turbine blade platform cooling and feed architecture (opens in a new tab)

  11. Experimental investigation of film cooling effectiveness on gas turbine blades

    … film hole/slot configurations and mainstream flow conditions. The study consisted of four parts: 1) effect of upstream wake on blade surface film cooling, 2) effect of upstream vortex on platform purge flow cooling, 3) influence of hole shape and angle on leading edge film cooling and 4) slot …

    tamu Repository record for Experimental investigation of film cooling effectiveness on gas turbine blades (opens in a new tab)

  12. Turbine Platform Film Cooling Effectiveness and Rotational Effect on Internal Cooling Passages with a Converging Tip Turn

    … linear rotor cascade platform with upstream purge flow, slashface leakage flow, and discrete film cooling using both cylindrical and fan-shaped holes. Detailed film cooling effectiveness distributions were obtained using the pressure sensitive paint (PSP) technique. Parametric studies on the …

    tamu Repository record for Turbine Platform Film Cooling Effectiveness and Rotational Effect on Internal Cooling Passages with a Converging Tip Turn (opens in a new tab)

  13. Experimental Study of Gas Turbine Blade Film Cooling and Heat Transfer

    … a detailed and systematic study of the various flow and geometrical parameters that may have a bearing on the cooling pattern. In the present study, experiments were performed in three regions of a non-rotating gas turbine blade cascade: blade platform, blade span, and blade tip. The blade …

    tamu Repository record for Experimental Study of Gas Turbine Blade Film Cooling and Heat Transfer (opens in a new tab)

  14. DEVELOPMENT AND TESTING OF A NEW AIR-ASSISTED FLARE SYSTEM FOR LOW FLOW CONDITIONS

    … combustion efficiency falls below 96.5%. Low flowrates of waste gases (purge flow conditions) results in flares with combustion efficiency less than 96.5%. During normal operating conditions, these flares process much lower flows of flare gas than they are optimally designed to process. This …

    must-thes Repository record for DEVELOPMENT AND TESTING OF A NEW AIR-ASSISTED FLARE SYSTEM FOR LOW FLOW CONDITIONS (opens in a new tab)

  15. Heat Transfer and Flow Characteristics on the Rotor Tip and Endwall Platform Regions in a Transonic Turbine Cascade

    … endwall regions. The heat transfer and secondary flow characteristics were analyzed for different engine relevant configurations and exit Mach/Reynolds number conditions. The experiments were conducted in a linear blowdown cascade at transonic high turbulence conditions of Mexit ~ 0.85, 0.60 and …

    vt Repository record for Heat Transfer and Flow Characteristics on the Rotor Tip and Endwall Platform Regions in a Transonic Turbine Cascade (opens in a new tab)

  16. Aerodynamic performance of turbine rim sealing flows

    … major modifications to allow different annulus flow configurations, higher resolution in the low and high bandwidth pressure instrumentation and the installation of a new system to quantify the sealing effective- ness using the tracer gas technique (±0.0068 uncertainty). Rotationally-driven …

    oxford Repository record for Aerodynamic performance of turbine rim sealing flows (opens in a new tab)

  17. Non-Noble Metal Cathodic Electrocatalysts for PEM Fuel Cells and Direct Methanol Fuel Cells

    … of the purging procedure, purging time, and purge flow. By opportunely modifications of the purging procedure, the performance of single DMFCs remained almost constant after 25 F/Ts.

    poli-torino Repository record for Non-Noble Metal Cathodic Electrocatalysts for PEM Fuel Cells and Direct Methanol Fuel Cells (opens in a new tab)

  18. Thermal desorption of hazardous and toxic organic compounds from soil matrices

    … from soil by thermal desorption and gas purge. Applying heat and a flow of inert gas to the soil increases the volatilization and effects removal of organic compounds from soil. The work was done in two parts: First, organic solvents were injected into columns containing real and …

    njit Repository record for Thermal desorption of hazardous and toxic organic compounds from soil matrices (opens in a new tab)

Page 1 of 2