Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 94 for “"Purlins"”.

  1. Strength evaluation of strut-purlins

    Diaphragm braced strut-purlins are commonly used in the roof systems of metal buildings. However, the design problem of combined uplift and axial loads on these members is not adequately addressed in the 1989 AISI specification. The objective of this thesis is to provide experimental evidence that …

    vt Repository record for Strength evaluation of strut-purlins (opens in a new tab)

  2. Behaviour, optimisation and design of cold-formed steel purlins

    Purlins are arguably the most widely used cold-formed steel members in construction. They are employed as secondary steelwork to support roof cladding, transfer loads and offer effective restraint to the primary steel members. Owing to their thin-walled nature, they are susceptible to a variety of …

    birmingham Download PDF for Behaviour, optimisation and design of cold-formed steel purlins (opens in a new tab)

  3. Structural analysis and design of cold formed steel sigma purlins

    … steel (CFS) sigma sections are commonly used as purlins in the construction of modern industrial and residential buildings due to their excellent strength-to-weight ratio. This thesis reports investigations on the structural behaviour of CFS sigma purlins in three different parts of modern roof …

    birmingham Download PDF for Structural analysis and design of cold formed steel sigma purlins (opens in a new tab)

  4. Optimum design of cold-formed steel purlins using genetic algorithms

    … carry out the optimization of cold-formed steel purlins, which are assumed to be continuous over two spans subjected to a gravity load. A genetic algorithm based optimum design method for cold-formed steel purlins is developed firstly. This method obtains the optimum dimensions for purlins with …

    aalto Repository record for Optimum design of cold-formed steel purlins using genetic algorithms (opens in a new tab)

  5. Sensitivity of Steel Purlins to Changes in Application of Wind Loads

    … the effects of wind tunnel test loads applied to purlins in low rise steel buildings compared to those determined with currently recognized wind loading provisions. The National Institute of Standards and Technology (NIST) database of low-rise building wind tunnel test data, which was collected at …

    vt Repository record for Sensitivity of Steel Purlins to Changes in Application of Wind Loads (opens in a new tab)

  6. Investigation of Single Span Z-Section Purlins Supporting Standing Seam Roof Systems Considering Distortional Buckling

    … the governing buckling strength for cold-formed purlins supporting a standing seam metal roof system is the 1996 AISI Specification for the Design of Cold-Formed Steel Structural Members, which contains provisions for local and lateral buckling. Previous research has determined that the AISI …

    vt Repository record for Investigation of Single Span Z-Section Purlins Supporting Standing Seam Roof Systems Considering Distortional Buckling (opens in a new tab)

  7. Structural behaviour of cold-formed steel purlin-sheeting systems under uplift loading

    … of cold-formed steel zed- and channel-section purlins when subjected to uplift loading in purlin-sheeting systems. In pre-buckling, an analytical model is presented to describe the bending and twisting behaviour of partially restrained zed- and channel-section purlins when subjected to uplift …

    birmingham Download PDF for Structural behaviour of cold-formed steel purlin-sheeting systems under uplift loading (opens in a new tab)

  8. Structural Behaviour of Lapped Cold-Formed Steel Z-Shaped Purlin Connections with Vertical Slotted Holes

    Lapped joints of cold-formed steel (CFS) Z-shaped purlins are extensively used in metal building roof systems. The research that has been carried out so far for these lapped connections is primarily focused on connections with round holes. However, the lapped connections with vertical slotted holes …

    waterloo Repository record for Structural Behaviour of Lapped Cold-Formed Steel Z-Shaped Purlin Connections with Vertical Slotted Holes (opens in a new tab)

  9. Base test method for gravity loaded standing seam roof systems

    … test must be conducted for each combination of purlins, deck panels, and clips that a manufacturer uses. The objective of this thesis is to investigate the possibility of eliminating the size of purlins, the orientation of purlins, length of span, and the presence or absence of insulation from a …

    vt Repository record for Base test method for gravity loaded standing seam roof systems (opens in a new tab)

  10. Effect of stressed skin action on the behaviour of cold-formed steel portal frames with non-linear flexible joints and top-hat purlins

    … yet recognized by design codes such as top-hat purlins, sheeting profiles fixed in the crest, profile thickness less than 0.5mm and composite panels were investigated in the test programme. 3) The difference in the structural behaviour of the bare and clad portal frames. A series of six …

    strathclyde Repository record for Effect of stressed skin action on the behaviour of cold-formed steel portal frames with non-linear flexible joints and top-hat purlins (opens in a new tab)

  11. Axial load capacity of cold-formed steel sections.

    Cold-formed steel strut purlins are important compression members in metal building wind bracing systems. They are generally located under the roof panel either in the braced bay or between the end wall and the first wind-braced bay in the building. Cold-formed Zee and Cee sections are typically …

    oklahoma-thes Repository record for Axial load capacity of cold-formed steel sections. (opens in a new tab)

  12. The Flexibility and Strength of Corrugated Diaphragms and Folded Plates

    … .ets taste edin every trough and in intermediate purlins which takes account of thelocalized distortion at the sheet ends by using an energy method analysisof assumed displacement functions to represent plate bending.For fastening in alternate or multiple of troughs, an additionalprofile …

    salford Download PDF for The Flexibility and Strength of Corrugated Diaphragms and Folded Plates (opens in a new tab)

  13. Cold-Formed Steel Behavior: Elastic Buckling Simplified Methods for Structural Members with Edge-Stiffened Holes and Purlin Distortional Buckling Strength Under Gravity Loading

    … determining capacity, in most loading conditions purlins are subjected to a downward uniform loading that provides additional resistance to distortional buckling in the top flange beyond the resistance of the steel roofing panel. This research describes an experimental study to explore and …

    vt Repository record for Cold-Formed Steel Behavior: Elastic Buckling Simplified Methods for Structural Members with Edge-Stiffened Holes and Purlin Distortional Buckling Strength Under Gravity Loading (opens in a new tab)

  14. Strength and Stiffness of Energy Panel Structures Wood-framed Metal-clad Diaphragms

    … Screws were used to fasten the sheeting to the purlins and the purlins were connected to the rafters using nails. The cantilever diaphragms were each tested twice, with the first being bending moment failure and the second being shear failure. The simple beam diaphragms were only tested once for …

    sdstate Repository record for Strength and Stiffness of Energy Panel Structures Wood-framed Metal-clad Diaphragms (opens in a new tab)

  15. A Study Rigid-Frame Design versus Truss-and-Column Design

    … of the building (sway bracing, lateral bracing, purlins, girts, roofing, siding, and bay spacing) was assumed to be the same for both designs. It is possible that this assumption cannot be made and the estimates of cost, therefore, are in error. In actual practice the complete redesign of the …

    u-pacific Repository record for A Study Rigid-Frame Design versus Truss-and-Column Design (opens in a new tab)

  16. Stability analysis of light gauge steel members using the finite element method and the generalized beam theory

    … light gauge steel members, namely rack columns, purlins and decks, have been analyzed using both FEM and GBT. The comparison of results from the numerical analyses and comprehensive tests agrees well. The author has risen to the challenge of complicated buckling problems and a pseudo-plastic …

    salford

  17. Implementación de criterios de sostenibilidad económica, social y medioambiental para la selección de la cubierta en edificios de luces medias

    … of the traditional Prefabricated concrete and purlins and Steel lattice and purlins options and other three applying technological innovations developed by the building industry: Prefabricated concrete and self-supporting curved system, Self-supporting curved system and Laminated wood and …

    upv Repository record for Implementación de criterios de sostenibilidad económica, social y medioambiental para la selección de la cubierta en edificios de luces medias (opens in a new tab)

  18. Evaluation of light-gauge metal diaphragm behavior and the diaphragms interaction with post frames

    … include openings in the sheeting, recessing of purlins in from the sheet ends, seams in the length of the sheet and placing the purlins flat;An analytical method and an empirical equation to be used in conjunction with testing are presented. The analytical method predicts the stiffness of the …

    iastate Repository record for Evaluation of light-gauge metal diaphragm behavior and the diaphragms interaction with post frames (opens in a new tab)

  19. Cost optimization of a structural roof system

    … composed of parallel chord, steel trusses, with purlins and decking. The variables considered are geometry, topology, and member size. The optimal values of the geometry and topology variables are determined by the application of Box's Complex Method. A fully stressed design criterion is used in …

    ubc Repository record for Cost optimization of a structural roof system (opens in a new tab) Download PDF for Cost optimization of a structural roof system (opens in a new tab)

Page 1 of 5