Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"Push-off Tests"”.
-
Finite element modelling of shear connection for steel-concrete composite girders
… package ABAQUS was used to conduct the analysis. Push-off tests with both types of slabs were simulated taking into consideration all material nonlinearities of the components. The models are able to predict the headed shear stud capacity, the load-slip characteristic of the shear connection and …
-
Evaluation of deck fasteners functioning as shear connectors for composite steel joists
… steel joists is studied. Results of thirty-six push-off tests are evaluated in terms of strength and behavior. Six types of deck fasteners are considered. They are: 1. #12-24 Teks/5 self-drilling, self-tapping screws. 2. 1/4-14 Teks/3 with a 1 1/4 in. stand-off sleeve. 3. 1/4-14 Teks/3 with a 1 …
-
Behaviour of demountable shear connectors in composite structures
… shear connectors in composite structures through push off tests and composite beam tests. Push off tests were conducted to examine the shear strength, stiffness and ductility of demountable shear connectors in composite structures. The experimental results showed that demountable shear connectors …
-
Upgrading the push-off test to analyze the contribution of steel fiber on shear transfer mechanisms
… increasing ultimate resistance and ductility. Push-off tests had been used to study the mechanisms of concrete shear transfer. Shear strength of the specimen depends on the contribution of both concrete and reinforcement. Aggregate interlock has a significant contribution to the concrete shear …
-
Improvement of shear-bond in composite steel and concrete floor slabs
… transferring device was then studied using small tests developed by the author. These results were compared with those of standard slab tests. From the first computer programme it was found that most of the steel-deck-reinforced slab systems experience the shear-bond mode of failure under higher …
-
Shear Connections for the Development of a Full-Depth Precast Concrete Deck System
… girder via a pocket-haunch-connector system. Push-off tests are performed to investigate the effects of various pre- and post-installed shear connectors, haunch height, surface roughness, grouping effects, and grout composition as compared to cast-in-place specimens. The experimental results …
-
Horizontal Shear Transfer Between Ultra High Performance Concrete And Lightweight Concrete
… Ductal® and Lightweight concrete. Twenty-four push-off tests were performed to determine if the current horizontal shear design equations could accurately predict the horizontal shear strength of composite Ductal® and Lightweight concrete sections. Effects from various surface treatments, …
-
Interface Shear Strength in Lightweight Concrete Bridge Girders
… and normal weight concrete. Thirty-six push-off tests were performed to determine if the current code equations accurately predict the horizontal shear strength of precast girders and cast-in-place decks for both normal weight and lightweight concrete. The different test series …
-
Horizontal Shear Connectors for Precast Prestressed Bridge Decks
… the main impetus for this project. A total of 36 push-off tests were performed to develop a method for quantifying horizontal shear strength and to recommend the best practice for the system. Test parameters included different haunch heights, different grout types, different amount and different …
-
Horizontal Shear Transfer for Full-Depth Precast Concrete Bridge Deck Panels
… predicted by current equations. A total of 29 push off tests were performed to quantify peak and post-peak shear stresses at the failure interface. The different series of tests investigated the surface treatment of the bottom of the slab, the type and amount of shear connector and a viable …
-
Recommendations for Surface Treatment for Virginia Inverted T-Beam Bridge System
… ten different surface textures was tested using push-off tests to determine which interface roughening methods would prove adequate for use in the bridge system. The strength was found to depend on both the amplitude and the geometry of the undulations on the beam-to-slab interface. Using this …
-
Design of shear connectors for precast concrete decks in concrete girder bridges
… is studied. In addition, several pullout tests, push-off tests, and one full-scale test were conducted to evaluate the performance of discrete clustered shear connectors and validate the proposed equation. Test results have indicated that the proposed equation can predict the capacity of …
-
Design and behavior of seamless bridge-pavement systems
… interaction through unit-cell direct shear tests and cyclic large-scale push-off tests. The load (shear) versus displacement behavior at the concrete slab-base interface was evaluated for different interface materials (geotextiles, polyethylene sheets, felt paper) intended to break the bond …
-
Structural performance of CFRP composites in UHPC sandwich walls and shock absorbing prosthetic pylons
… to 65–84% of ambient capacity, whereas residual tests showed only minor degradation. Modified push-off tests evaluated shear transfer and crack stabilization in UHPC reinforced with straight and oblong CFRP stirrups under concentric and eccentric loading. CFRP stirrups enhanced shear capacity and …
-
Ultra-High Performance Concrete (UHPC) Deck-To-Girder Connection for Accelerated Bridge Construction
… shear reinforcement is terminated below the soffit of deck panels to eliminate any conflicts with deck reinforcement and relax production and erection tolerances. Shear pockets with loose bars are filled with UHPC to provide shear transfer mechanism between concrete deck panels and girders.To …
-
Design of Shear Pocket Connections in Full-Depth Precast Concrete Bridge Deck Systems
… tolerance. Experimental investigation (push-off testing) and finite element analysis (FEA) were performed to validate the developed design procedures/criteria. Analysis and testing results validated the adequacy of the developed design procedures/criteria for HSS-formed shear pocket …
-
Experimental Evaluation and Analytical Modeling of Shear Bond in Composite Slabs
… property derived from full scale performance tests. In numerical modeling, the interaction property is obtained from a variety of elemental push off tests which, for the most part, do not represent actual slab bending. This research comprises experimental, analytical and numerical …
-
Active Retrofit of Shear Critical RC Components Using Self-Prestressing Iron-Based Shape Memory Alloys
… phase of this study involved conducting push-off tests on RC specimens retrofitted with pre-deformed Fe-SMA strips. The goal was to assess the efficiency of active shear retrofitting. Additionally, finite element analysis (FEA) simulations were employed to model Fe SMA-retrofitted RC …
-
A generic mechanics approach for predicting shear strength of reinforced concrete beams.
… show good agreement with test data. A series of push-off tests are conducted to investigate the shear friction parameters for initially uncracked concrete under low levels of confinement. In addition, it is shown that the concrete shear friction properties can be extracted from simple confined …
-
Composite Action in Prestressed NU I-Girder Bridge Deck Systems Constructed with Bond Breakers to Facilitate Deck Removal
Results are reported from tests of small scale push-off and large-scale composite NU I-girder specimens conducted to establish an interface connection detail that 1) Facilitates in-situ removal of the bridge deck without damaging prestressed girders and 2) Maintains composite action between the …
Page 1 of 2