Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 7 of 7 for “"Pushout Test"”.

  1. Analysis of Single Fiber Pushout Test of Fiber Reinforced Composite with a Nonhomogeneous Interphase

    Fiber pushout test models are developed for a fiber-matrix-composite with a nonhomogeneous interphase. Using design of experiments, the effects of geometry, loading and material parameters on critical parameters of the pushout test such as the load-displacement curve and maximum interfacial shear …

    usf Repository record for Analysis of Single Fiber Pushout Test of Fiber Reinforced Composite with a Nonhomogeneous Interphase (opens in a new tab)

  2. Bonding an Dentin – Ein experimenteller Vergleich zur Verbesserung und Konservierung der Verbundfestigkeit mithilfe natürlicher Inhaltsstoffe

    … der Parameter Verbundfestigkeit im Scher- und Pushout-Test, Frakturmuster, Verbundmorphologie und Zytotoxizität ebendieser Werkstoffe im Vergleich zu einem etablierten Goldstandard in CSE. Bestandteil der ersten Publikation mit dem Titel „Enhancing dentin bonding through new adhesives …

    lmu-germany Repository record for Bonding an Dentin – Ein experimenteller Vergleich zur Verbesserung und Konservierung der Verbundfestigkeit mithilfe natürlicher Inhaltsstoffe (opens in a new tab)

  3. Standoff screws functioning as mechanical shear connectors in composite joists

    The results of sixty-five double-sided pushout tests utilizing the Elco grade 8, 5/16 in. diameter, standoff screw functioning as a mechanical shear connector are presented. In all tests, the base material, through which the screw was fastened, was fabricated out of back to back angle to simulate …

    vt Repository record for Standoff screws functioning as mechanical shear connectors in composite joists (opens in a new tab)

  4. Bone regeneration in novel porous titanium implants

    … the mechanical properties were evaluated by pushout test on a material testing machine. The samples were loaded at a loading rate of 1 mm/min. The pushout strength was measured and the apparent shear stiffness was calculated. The results were analyzed with a paired-t test. The histology shows …

    iupui Repository record for Bone regeneration in novel porous titanium implants (opens in a new tab)

  5. Effect of cast iron surface treatment on interfacial adhesion of Al/Fe compound cast structure

    … of the Al/Fe interface was assessed by the pushout test and the result was compared with microstructural changes at the interface. The correlation between the surface roughness of the inserts, their microstructure, and mechanical properties was also discussed. Based on the obtained result, a …

    chalmers Repository record for Effect of cast iron surface treatment on interfacial adhesion of Al/Fe compound cast structure (opens in a new tab)

  6. TORSION, SHEAR AND BENDING OF TIMBER COMPOSITE FLOORS

    … similar composite LVL hollow box beams were tested under three-point and four-point bending to assess composite interaction, shear and flexural performance, and failure modes following staged loading. Material characterisation tests, including embedment and push-out tests, were also conducted …

    unsw Repository record for TORSION, SHEAR AND BENDING OF TIMBER COMPOSITE FLOORS (opens in a new tab)

  7. Keramické transparentní materiály zpevněné vlákny

    Tato bakalářská práce shrnuje možnosti zhouževnatění keramických materiálů zejména pomocí různých typů vláken a popisuje principy umožňující přípravu transparentních kompozitních materiálů zpevněných vlákny. V této práci je dále vysvětlena úloha rozhraní mezi vláknem a matricí. Dále jsou popsány …

    brno-tech Repository record for Keramické transparentní materiály zpevněné vlákny (opens in a new tab)