Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 6 of 6 for “"Pyrex 7740"”.
-
Design and Fabrication of Nanofluidic Systems with Integrated Sensing Electrodes for Rapid Biomolecule Characterization
… the evaporation of chrome/gold (Cr/Au) onto a Pyrex 7740 wafer followed by photolithography and wet etching of the microchannels. The wafer was patterned a second time to form Au microelectrodes with 15-45 micrometer separation gaps in the nanochannel region. Sensing electrodes (up to one …
-
Ακριβής μέτρηση θερμικής αγωγιμότητας στερεών υλικών
… of the thermal conductivity of solid materials(Pyrex 7740, Pyroceram 9606, AISI 304L).
-
Continuous flow, submicro-liter scale PCR device for the analysis of plant genomes
… chip is achieved through thermally bonding two Pyrex 7740 glass wafers. One Pyrex wafer is etched to form the 20-cycle microchannel with 80 microns wide and 30 microns deep. Three independent thin film Pt heaters are fabricated on the bottom of the glass wafer to produce three different …
-
CRACK PATTERN SIMULATION OF PRESSURIZED BOROSILICATE GLASS TUBE UNDER PELLET IMPACT USING ALE METHOD
… consists of 0.22 caliber lead pellet impacting Pyrex 7740 borosilicate glass tube. Previous studies on the effect of the mesh pattern, size and cap geometry were carried out. One of the biggest factors which can help in mitigating the transformer component damage is internal pressure of bushing …
-
Simulation of Crack Pattern on Borosilicate Glass Cylinder on Pellet Impact
… on simulating the crack pattern developed on a Pyrex 7740 borosilicate glass cylinder which is under impact by a 0.22 caliber lead pellet. The crack pattern develops right after the pellet hits cylinder and leaves it by piercing through the other side, before shattering it into pieces. In the …
-
Measurement of the thermal conductivity of composite solid materials
… ofthe reference materials Pyroceram 9606 and Pyrex 7740 over a temperature rangefrom 315 K to 440 K. The sensor was also used for studying candidate referencematerials for thermal conductivity, Polymethyl Methacrylate (PMMA) andBorosilicate Crown Glass (BK7). The acquired thermal conductivity …