Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 34 for “"Pyrometers."”.

  1. An analysis of the feasibility of predictive process control of welding applications using infrared pyrometers and thermal metamodels

    Predictive process control (PPC) is the use of predictive, physical models as the basis for process control [1]. In contrast, conventional control algorithms utilize statistical models that are derived from repetitive process trials. PPC employs in-process monitoring and control of manufacturing …

    texas Repository record for An analysis of the feasibility of predictive process control of welding applications using infrared pyrometers and thermal metamodels (opens in a new tab)

  2. Heat treatment optimization of through-hardening bearing steels

    Non-contact infrared thermometers, such as pyrometers, are excellent for monitoring surface temperatures of objects that are moving, difficult to reach or extremely hot without damaging the object. Pyrometers are also easy to handle and often less expensive than contact temperature sensors. If …

    chalmers Repository record for Heat treatment optimization of through-hardening bearing steels (opens in a new tab)

  3. Temperature control and measurement in spike anneal

    … Different designs for the edge ring and the pyrometers have been tried and successfully implemented. This dilemma is resolved with the design of a spectral coating that maximizes reflectivity in the pyrometer band pass and maximizes absorptivity in the longer wavelengths.

    ttu Repository record for Temperature control and measurement in spike anneal (opens in a new tab)

  4. Characterization of heat transfer in the secondary cooling system of a continuous slab caster

    Air-purged radiation pyrometers have been installed at several locations below the mould of a continuous slab-casting machine. In each secondary cooling zone, slab surface temperatures have been measured under normal and modified water spray cooling practices. A one-dimensional heat-transfer model …

    ubc Repository record for Characterization of heat transfer in the secondary cooling system of a continuous slab caster (opens in a new tab) Download PDF for Characterization of heat transfer in the secondary cooling system of a continuous slab caster (opens in a new tab)

  5. Design and Analysis of Compressed Air Power Harvesting Systems

    … Limitations for the usage of infrared pyrometers is evaluated. A system of governing equations for thermoelectric generators is developed. A solution method for solving the system of equations is created in order to predict power output from the device. Payback analysis is proposed for …

    byu Repository record for Design and Analysis of Compressed Air Power Harvesting Systems (opens in a new tab) Download PDF for Design and Analysis of Compressed Air Power Harvesting Systems (opens in a new tab)

  6. Investigation into methods for the calculation and measurement of pulverised coal boiler flue gas furnace exit temperature

    … was explored. Already installed radiation pyrometers were also used as a reference for interpreting the acoustic measurements. The indications are that the acoustic pyrometer provides a more representative temperature measurement than the radiation pyrometers. The uncertainty of the …

    cape-town Repository record for Investigation into methods for the calculation and measurement of pulverised coal boiler flue gas furnace exit temperature (opens in a new tab)

  7. Multi-wavelength infrared imaging computer systems and applications

    … were developed for the multi-wavelength imaging pyrometers (M-WIPs) that yield non-contact temperature measurements by remotely sensing the surface of objects with unknown wavelength-dependent emissivity. These M-WIP computer systems represent the state-of-art development in remote temperature …

    njit Repository record for Multi-wavelength infrared imaging computer systems and applications (opens in a new tab)

  8. Temperature control and modeling of rapid thermal processing

    … of the wafer. Two narrow band gap infrared pyrometers (λ = 3.3µm) were installed at the top of the lamp housing with water circulating light pipes accessing the wafer temperature signal points. In RTP, accurate temperature control during ramp and hold with fast ramp rate and good uniformity …

    texas Repository record for Temperature control and modeling of rapid thermal processing (opens in a new tab)

  9. Design of a laser pyrometer for the measurement of unsteady temperature distribution during laser welding

    <p>Pyrometers using a single element detector, 3x1 linear array and 3x3 area array were designed for the purpose of measuring temperatures of a spot in a pulsed laser weld-pool. The design is predicated on sampling at rates sufficient to track weld-pool temperature changes introduced by a 5 kHz …

    ut-knoxville Repository record for Design of a laser pyrometer for the measurement of unsteady temperature distribution during laser welding (opens in a new tab)

  10. Detection and measurement of phase transformation in steel using electromagnetic sensors

    … and hence mechanical properties. Optical pyrometers are currently used by the steel industry to monitor temperature, and hence infer microstructure, however, their performance is imperfect due to the harsh environment that exists within the run out table. Methods for measuring micro …

    birmingham Download PDF for Detection and measurement of phase transformation in steel using electromagnetic sensors (opens in a new tab)

  11. Effects of chemical kinetics on sound propagation within high temperature hydrocarbon combustion products

    … of the method were also discussed. Acoustic pyrometers and other acoustic sensors will in general provide better results if the theoretical method is used for calculating sound speed propagating within chemically reacting gas mixtures.

    nebraska Repository record for Effects of chemical kinetics on sound propagation within high temperature hydrocarbon combustion products (opens in a new tab)

  12. Thermosensitive Phosphors As Optical Temperature Sensors In Extreme Environments

    … offer unique advantages over thermocouples and pyrometers for applications in extreme environments such as operando wall temperature mapping of combustion engines. A refractory oxide host doped with an optically active ion has the potential to afford a thermosensitive phosphor with a …

    wayne-thes Repository record for Thermosensitive Phosphors As Optical Temperature Sensors In Extreme Environments (opens in a new tab)

  13. Evaluation of environmental materials as thermal witness materials

    … traditional sensors like thermocouples, optical pyrometers struggle to describe the dynamic changes in the environment. The presented research focuses on the development of thermal witness materials that are injected into the combustion environment, where they travel with the expanding gases and …

    njit Repository record for Evaluation of environmental materials as thermal witness materials (opens in a new tab)

  14. Observer-Based Simultaneous States and Parameters Estimation Method with Application to System Heath Monitoring

    … crystal rod, obstructing the area between the pyrometers and the substrate. To overcome this challenge, a physics-based heating model for the substrate is developed and an augmented extended Kalman filter is implemented for the simultaneous estimation of the substrate temperature and heating …

    houston Repository record for Observer-Based Simultaneous States and Parameters Estimation Method with Application to System Heath Monitoring (opens in a new tab) Embargoed until 2026-12-01

  15. Design, construction and calibration of a photoelectric pyrometer

    The pyrometer described herein is a portable temperature measuring instrument that has no thermal capacity and which does not rely on the eye and judgment of the operator for brightness or color matches. This instrument can indicate the temperature of' a body practically instantaneously over a wide …

    vt Repository record for Design, construction and calibration of a photoelectric pyrometer (opens in a new tab)

  16. Changes in water infiltration capacities following burning of a ponderosa pine forest floor

    … during treatments were measured with fusion pyrometers. Surface soil temperatures for the light burns did not exceed 200°F. Maximum temperatures at the soil surface for heavy burns ranged from 350°F. to 550°F. An infiltrometer plot, one by four feet in size, was installed in the center of …

    arizona-thes Repository record for Changes in water infiltration capacities following burning of a ponderosa pine forest floor (opens in a new tab)

  17. The prediction of the evolution of microstructure during hot rolling of steel strips

    … temperature of the strip was monitored with pyrometers at several locations. To obtain an accurate prediction of the roll forces in the roll bite, Orowans' model, as formulated by Alexander, was modified to incorporate the temperature variation within the strip. This involved a force balance …

    ubc Repository record for The prediction of the evolution of microstructure during hot rolling of steel strips (opens in a new tab) Download PDF for The prediction of the evolution of microstructure during hot rolling of steel strips (opens in a new tab)

  18. Megahertz Rate Spectroscopic Investigation of Hypervelocity Impact Flash

    … cameras, photodiodes and photomultiplier tubes, pyrometers, laser interferometers, and spectrometers. Stop-motion or relatively low-rate spectral analysis systems have been employed to measure HVI-induced light emission, providing some spectral information related to the dynamic material behavior …

    tamu Repository record for Megahertz Rate Spectroscopic Investigation of Hypervelocity Impact Flash (opens in a new tab)

  19. The Study of Fire Spread on an Inclined Wooden Surface by Multiple Spectrum Imaging Systems and Diagnostical Techniques

    … first contribution of this work is the developed pyrometers which are based on two methods: the first one is the two-colour method, which relies on the response ratio between two selected wavelengths. This method is used for measuring the soot flame temperature. The second pyrometer is based on …

    whiterose Download PDF for The Study of Fire Spread on an Inclined Wooden Surface by Multiple Spectrum Imaging Systems and Diagnostical Techniques (opens in a new tab)

Page 1 of 2