Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 92 for “"Quarter Car"”.

  1. Investigation of a non-linear suspension in a quarter car model

    This thesis presents the study of a quarter car model which consists of a two-degree-of-freedom (2 DOF) with a linear spring and a nonlinear spring configuration. In this thesis, the use of non-linear vibration attachments is briefly explained, and a survey of the research done in this area is also …

    aston Download PDF for Investigation of a non-linear suspension in a quarter car model (opens in a new tab)

  2. Calibration of IRI-based PSI Equation using Updated Quarter-Car Parameters

    … was comparing the IRI values calculated from the quarter car parameters of the golden car used to develop the current PSI equation and modern passenger cars found from an extensive discovery search. The approach was driven by the hypothesis that there has been improvement in the suspension systems …

    wvu Repository record for Calibration of IRI-based PSI Equation using Updated Quarter-Car Parameters (opens in a new tab)

  3. Neural network identification of quarter-car passive and active suspension systems

    … design of active suspension systems based on a quarter-car model with both full-state feedback and incomplete state feedback controllers to optimize the passenger ride comfort, road handling and car controlling. Linear stochastic optimal control will be employed to design an active controller in …

    vt Repository record for Neural network identification of quarter-car passive and active suspension systems (opens in a new tab)

  4. Estimation of Disturbance Inputs to a Tire Coupled Quarter-car Suspension Test Rig

    … forces, acting on the sprung mass of a quarter-car suspension test rig was generated. This information is intended for use in active control methods applied to vehicle suspensions. This estimate is achieved with two acceleration measurements as inputs to the estimator; one each on the …

    vt Repository record for Estimation of Disturbance Inputs to a Tire Coupled Quarter-car Suspension Test Rig (opens in a new tab)

  5. Quarter car rig for software function development of fully active suspension and continuously controlled dampers

    … of FAS in the early development phase of the car will be helpful to achieve the right balance between ride comfort and handling. Early in the vehicle development projects, real vehicle prototypes are missing or lacking correct suspension geometry and/or FAS and CCD actuators. Virtual …

    chalmers Repository record for Quarter car rig for software function development of fully active suspension and continuously controlled dampers (opens in a new tab)

  6. Design of active suspension control based upon use of tubular linear motor and quarter-car model

    The design, fabrication, and testing of a quarter-car facility coupled with various control algorithms are presented in this thesis. An experimental linear tubular motor, capable of producing a 52-N force, provides control actuation to the model. Controllers consisting of two designs were …

    tamu Repository record for Design of active suspension control based upon use of tubular linear motor and quarter-car model (opens in a new tab)

  7. Multibody Dynamics Modeling and System Identification for a Quarter-Car Test Rig with McPherson Strut Suspension

    … dynamic response and joint reaction forces of a quarter-car suspension. This need is addressed by this study through development and system identification of both a linear and a non-linear multibody dynamics McPherson strut quarter-car suspension model. Both models are developed using a method …

    vt Repository record for Multibody Dynamics Modeling and System Identification for a Quarter-Car Test Rig with McPherson Strut Suspension (opens in a new tab)

  8. Experimental Validation of a Numerical Controller Using Convex Optimization with Linear Matrix Inequalities on a Quarter-Car Suspension System

    … effort with the change in the sprung mass of the quarter-car system. The quarter-car system makes use of a linear brushless permanent magnet motor (LBPMM) as an actuator, a linear variable differential transformer (LVDT) and two accelerometers as sensors for feedback control and forms a platform …

    tamu Repository record for Experimental Validation of a Numerical Controller Using Convex Optimization with Linear Matrix Inequalities on a Quarter-Car Suspension System (opens in a new tab)

  9. Design and Adaptive Control of a Lab-based, Tire-coupled, Quarter-car Suspension Test Rig for the Accurate Re-creation of Vehicle Response

    … toward a common goal. First, a state-ofthe-art quarter-car test platform has been designed and constructed to offer increased testing flexibility at a reasonable cost not found commercially. With this new test rig completed, the second objective is a proof-of-concept evaluation of a well known …

    vt Repository record for Design and Adaptive Control of a Lab-based, Tire-coupled, Quarter-car Suspension Test Rig for the Accurate Re-creation of Vehicle Response (opens in a new tab)

  10. Experimental Evaluation of Semiactive Magneto-Rheological Suspensions for Passenger Vehicles

    … A full-scale two-degree-of-freedom (2DOF) quarter-car test apparatus has been constructed at the Advanced Vehicle Dynamics Lab at Virginia Tech to evaluate the response of a vehicle suspension under the different control schemes of skyhook, groundhook, and hybrid semiactive control. The …

    vt Repository record for Experimental Evaluation of Semiactive Magneto-Rheological Suspensions for Passenger Vehicles (opens in a new tab)

  11. Nonlinear and adaptive control algorithms for electrohydraulic active suspension systems

    … for automobile active suspension systems. The car electrohydraulic active suspension modeling systems were characterized by several phenomena, such as nonlinear dynamics, parametric uncertainties, and uncertain nonlinearities. Therefore, the control laws were developed in this thesis for a SISO …

    ets-quebec Download PDF for Nonlinear and adaptive control algorithms for electrohydraulic active suspension systems (opens in a new tab)

  12. Combined Time and Frequency Domain Approaches to the Operational Identification of Vehicle Suspension Systems

    … experimental testing and simulation. A quarter car suspension test rig is designed and built to facilitate experimental suspension system testing. A novel shock absorber force measurement set–up is developed allowing the measurement of shock absorber force under both isolated and …

    dcu Download PDF for Combined Time and Frequency Domain Approaches to the Operational Identification of Vehicle Suspension Systems (opens in a new tab)

  13. On the Control Aspects of Semiactive Suspensions for Automobile Applications

    … characteristics of a two-degree-of freedom quarter-car model, using passive and semi-active dampers, along with a seven-degree-of-freedom full vehicle model. The behaviors of the semi-actively suspended vehicles have been evaluated using skyhook, groundhook, and hybrid control policies, and …

    vt Repository record for On the Control Aspects of Semiactive Suspensions for Automobile Applications (opens in a new tab)

  14. ACTIVE SUSPENSION CONTROL WITH DIRECT-DRIVE TUBULAR LINEAR BRUSHLESS PERMANENT-MAGNET MOTOR

    … the control algorithm for active suspension, a quarter-car test bed was built by using a direct-drive tubular linear brushless permanent-magnet motor (LBPMM) as a force-generating component. Two accelerometers and a linear variable differential transformer (LVDT) are used in this quarter-car …

    tamu Repository record for ACTIVE SUSPENSION CONTROL WITH DIRECT-DRIVE TUBULAR LINEAR BRUSHLESS PERMANENT-MAGNET MOTOR (opens in a new tab)

  15. Vehicle Sprung Mass Parameter Estimation Using an Adaptive Polynomial-Chaos Method

    … the polynomial-chaos representation of a general quarter-car model is presented. Because the uncertainty was assumed to be concentrated in the sprung mass parameter, a novel pseudo mass matrix was developed for generating the state-space PCE model. In order to implement the PCE model in a …

    vt Repository record for Vehicle Sprung Mass Parameter Estimation Using an Adaptive Polynomial-Chaos Method (opens in a new tab)

  16. Elastodynamic Analysis of Vehicle Suspension Uprights

    The ability of a Formula SAE sports car to negotiate a turn in a race is influenced by many parameters which include car's overall geometry, its shape, weight distribution, type of suspension used, spring and shock absorber characteristics that are used in the tire properties, static and dynamic …

    vt Repository record for Elastodynamic Analysis of Vehicle Suspension Uprights (opens in a new tab)

  17. Dynamic Analysis of Semi-Active Control Techniques for Vehicle Applications

    … policies as tested on a single suspension quarter-car system. Incorporating a magneto-rheological damper, the full-scale 2DOF quarter-car system was used to evaluate skyhook, groundhook, and hybrid control. Two alternative skyhook policies were also considered, namely displacement skyhook …

    vt Repository record for Dynamic Analysis of Semi-Active Control Techniques for Vehicle Applications (opens in a new tab)

  18. A Discrete Roughness Index for Longitudinal Road Profiles

    … and using parameters other than the Golden Quarter-Car on which the IRI is based. The development of the DRI begins with a consistent discretization of the terrain surface, vehicle response, and the IRI. Next the Fractional Response Coefficient is developed, the properties of which are …

    vt Repository record for A Discrete Roughness Index for Longitudinal Road Profiles (opens in a new tab)

Page 1 of 5