Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"Quasi-Distributed"”.

  1. Quasi-distributed fibre-optic chemical sensing using telecom fibre

    … makes this approach particularly suited to quasidistributed sensing. Preliminary results for multi-point pH sensing incorporating an 850nm Optical Time Domain Reflectometer and a near-infra-red dye are presented. The characterisation of a new family of materials known as organically modified …

    dcu Download PDF for Quasi-distributed fibre-optic chemical sensing using telecom fibre (opens in a new tab)

  2. Application of the FMCW method to quasi-distributed absorption sensors

    We report on different addressing mechanisms for quasi-distributed absorption sensors based on the frequency modulated continuous wave (FMCW) method. The sensor units consist of open-path micro-optic cells constructed from GRIN lenses, each of differing lengths. Guided by initial simulations, two …

    strathclyde Repository record for Application of the FMCW method to quasi-distributed absorption sensors (opens in a new tab)

  3. Optical Frequency Domain Reflectometry Based Quasi-distributed High Temperature Sensor

    Temperature sensing in harsh environment is desired in many areas, such as coal gasification, aerospace, etc. Single crystal sapphire is an excellent candidate for construction of harsh environment sensors due to its superior mechanical and optical properties even at temperature beyond 1600°C. The …

    vt Repository record for Optical Frequency Domain Reflectometry Based Quasi-distributed High Temperature Sensor (opens in a new tab)

  4. Quasi-Distributed Intrinsic Fabry-Perot Interferometric Fiber Sensor for Temperature and Strain Sensing

    … resolution, attenuation insensitive and low-cost quasi-distributed temperature and strain sensors that can reliably work under harsh environment or in extended structures. There are two main drives for distributed fiber sensor research. The first is to lower cost-per-sensor so that the fiber …

    vt Repository record for Quasi-Distributed Intrinsic Fabry-Perot Interferometric Fiber Sensor for Temperature and Strain Sensing (opens in a new tab)

  5. High-Speed Quasi-Distributed Optical Fiber Sensing Based on Ultra-Weak Fiber Bragg Gratings

    … for many research areas. One example area is distributed optical fiber sensing, which has been attracting research interests for decades. Optical fiber sensors are immune to electromagnetic interference, and resistant to corrosion and can endure harsh environment so they have found …

    vt Repository record for High-Speed Quasi-Distributed Optical Fiber Sensing Based on Ultra-Weak Fiber Bragg Gratings (opens in a new tab)

  6. A Quasi-distributed Sensing Network Based on Wavelength-Scanning Time-division Multiplexed Fiber Bragg Gratings

    … multiplexing (WSTDM) of 1000 ultra-weak FBGs for distributed temperature sensing. In comparison with the OFDR method, the WSTDM method distinguishes the sensors by different time delays, and its maximum operation distance, which is limited by the transmission loss of the fiber, can be as high as …

    vt Repository record for A Quasi-distributed Sensing Network Based on Wavelength-Scanning Time-division Multiplexed Fiber Bragg Gratings (opens in a new tab)

  7. UV-Induced Intrinsic Fabry-Perot Interferometric Fiber Sensors and Their Multiplexing for Quasi-Distributed Temperature and Strain Sensing

    Distributed temperature and strain sensing is demanded for a wide range of applications including real-time monitoring of industrial processes, health monitoring of civil infrastructures, etc. Optical fiber distributed sensors have attracted tremendous research interests in the past decade to meet …

    vt Repository record for UV-Induced Intrinsic Fabry-Perot Interferometric Fiber Sensors and Their Multiplexing for Quasi-Distributed Temperature and Strain Sensing (opens in a new tab)

  8. Intrinsic Fabry-Perot Interferometric Fiber Sensor Based on Ultra-Short Bragg Gratings for Quasi-Distributed Strain and Temperature Measurements

    … life-cycle costs and improve reliability. The distributed strain and temperature sensing is highly desired in large structures where strain and temperature at over thousand points need to be measured simultaneously. It is difficult to carry out this task using conventional electrical strain …

    vt Repository record for Intrinsic Fabry-Perot Interferometric Fiber Sensor Based on Ultra-Short Bragg Gratings for Quasi-Distributed Strain and Temperature Measurements (opens in a new tab)

  9. Fluorescence-based fibre optic sensor systems for temperature and strain measurement

    … developed has been expanded to multi-point or quasi-distributed temperature sensing application by using Prony's method, which enables the exponential decays from either single material, two-material or even several element quasi-distributed sensors to be analyzed and thus data and associated …

    city-london Download PDF for Fluorescence-based fibre optic sensor systems for temperature and strain measurement (opens in a new tab)

  10. High resolution optical time domain methods for measuring strain

    … optical time-domain fiber sensor for measuring quasi-distributed strain along a cantilevered beam is experimentally demonstrated. This is accomplished by segmenting the sensor with air-gap sites, allowing reflections to be monitored. Physically looping these fiber segments many times over their …

    vt Repository record for High resolution optical time domain methods for measuring strain (opens in a new tab)

  11. Multi-point temperature sensing in gas turbines using fiber-based intrinsic Fabry-Perot interferometers

    … the foundation for future efforts in developing quasi-distributed temperature sensors by identifying potential obstacles and fundamental limitations for certain approaches.

    vt Repository record for Multi-point temperature sensing in gas turbines using fiber-based intrinsic Fabry-Perot interferometers (opens in a new tab)

  12. Simulation of interconnections in high speed integrated circuits.

    … using the well-known Telegrapher's equations. A quasi-distributed equivalent circuit model describing the behaviour of such microstrip lines is implemented into the SPICE circuit simulator. This allows an investigation into lossless and lossy line characteristics and illustrates the importance of …

    sheffield-hallam Download PDF for Simulation of interconnections in high speed integrated circuits. (opens in a new tab)

  13. Modeling and application of soil moisture at varying spatial scales with parameter scaling

    … and scaling characteristics of soil moisture, a quasi-distributed Soil-Vegetation-Atmosphere-Transfer (SVAT) modeling framework is developed to simulate the hydrological dynamics, i.e., the fluxes and the state variables within the satellite-based soil moisture footprint. The modeling framework …

    tamu Repository record for Modeling and application of soil moisture at varying spatial scales with parameter scaling (opens in a new tab)

  14. Design and fabrication of customized fiber gratings to improve the interrogation of optical fiber sensors

    … employed for implementing a large scale quasi-distributed sensor, based on an array of cascaded FBGs. The potentiality of LPGs as fiber optic sensors has also been investigated in a new fashion, exploiting the potentials of MWP filtering techniques. Besides, a novel approach for …

    upv Repository record for Design and fabrication of customized fiber gratings to improve the interrogation of optical fiber sensors (opens in a new tab)

  15. Optical pressure sensors using interferometric techniques

    … in this case, the light source employed was a "quasi-white light", short coherence light source, a light emitting diode (LED). Its output was coupled into a multimode fibre before entering the processing interferometer. With the use of the processing interferometer, the sensing element …

    city-london Download PDF for Optical pressure sensors using interferometric techniques (opens in a new tab)

  16. Digitally Enhanced Interferometry for Precision Metrology

    … in Part 1, we consider the application to quasi-distributed interferometric sensing in the form of a multi-point interferometric acoustic sensing array. Using Digitally Enhanced Heterodyne interferometry, we demonstrate simultaneous readout from four discrete in-line surfaces using a single …

    anu Repository record for Digitally Enhanced Interferometry for Precision Metrology (opens in a new tab)

  17. AN INNOVATIVE FIBRE BRAGG GRATING BASED SENSING SYSTEM

    … multiplexed along a single fiber to realize a quasi-distributed multipoint sensing system. Another advantage of FBGs is that the measurement signal is encoded into the wavelength, so it is very robust to intensity noise, a property highly appreciable in conditions that require long fiber spans …

    poli-torino Repository record for AN INNOVATIVE FIBRE BRAGG GRATING BASED SENSING SYSTEM (opens in a new tab)

  18. ARCHITECTURES FOR SOFT-SWITCHING AND POWER SCALING OF POWER CONVERTERS

    … in capacitive WPT systems. Using NiZn ferrite, quasi-distributed air gaps, and interleaved foil windings, a 13.56-MHz, 5-μH prototype inductor operating at 20 A peak achieves a quality factor of ~1190 with a 4× reduction in volume compared to air-core counterparts. To address power scaling …

    cornell Repository record for ARCHITECTURES FOR SOFT-SWITCHING AND POWER SCALING OF POWER CONVERTERS (opens in a new tab)

  19. High-level control algorithms for maximising energy efficiency of solar nano-grids designed for energy access

    … control algorithm, the second one was a quasi-consensus based distributed control algorithm and the third one was a distributed state-of-charge based droop control algorithm. Numerical and simulation results carried out in Python showed the effectiveness of the developed control …

    oxford Repository record for High-level control algorithms for maximising energy efficiency of solar nano-grids designed for energy access (opens in a new tab)

  20. Ολοκληρωμένο πλαίσιο μοντελοποίησης υδρολογίας, ποιότητας νερών και στερεοπαροχής σε λεκάνες απορροής ποταμών διαλείπουσας ροής

    … interactions is achieved by integrating the quasi-distributed watershed Soil and Water Assessment Tool (SWAT) model with the three-dimensional groundwater flow Princeton Transport Code (PTC) model. The combined models are applied to the alluvial plain (300 km2) of Evrotas watershed by …

    greece Repository record for Ολοκληρωμένο πλαίσιο μοντελοποίησης υδρολογίας, ποιότητας νερών και στερεοπαροχής σε λεκάνες απορροής ποταμών διαλείπουσας ροής (opens in a new tab)