Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"Quicklime"”.
-
The effects of quicklime on the decomposition process in a tropical climate
… the effect of calcium oxide (CaO), known as “quicklime”, on the decomposition process of human remains in a tropical climate. Quicklime has been used since the Early Iron Age, in wars, mass graves and today by criminals, as there is a belief or social myth that it can speed up the process of …
-
Flash calcination of limestone in a bench-scale sorbent activation process (SAP) unit
… mercury and calcium-based sorbents such as quicklime (CaO) and hydrated lime (Ca(OH)2) are suitable sorbents to capture SOx and HCl. This research addresses producing quicklime by a novel process to remove SOx and HCl from flue gas streams. Quicklime is commercially prepared by thermal …
-
Διερεύνηση των κριτηρίων καταλληλότητας ασβεστόλιθων για παραγωγή βιομηχανικού ασβέστη
… was initially determined that the reactivity of quicklime constitute the main measure of the suitability of a carbonate rock. The most active samples, were those containing higher calcium contents. Additionally, the presence of magnesium hardens the sample, due to the early breakup of MgCO3. This …
-
Geopolymer composites based on fly Ash from co-combustion of coal and biomass
… with single activators (sodium hydroxide, quicklime) or combined activators (sodium hydroxide with quicklime, sodium hydroxide with sodium silicate and quicklime with sodium silicate) to obtain pastes and mortars. To analyze the influence of calcium compound on mortar performances, CaO and …
-
Rapid Soil Stabilization of Soft Clay Soils for Contingency Airfields
… achieved by treating clay with 2%-4% pelletized quicklime for the underlying subbase layer, and treating clay with 2%-4% pelletized quicklime, 1% RSC15 fibers, and 11% Type III cement for the top base layer. While the base layer requires a minimum thickness of six inches, the required subbase …
-
Stabilization of Soft Clay Subgrades in Virginia Phase I Laboratory Study
… in service. The selected stabilizers were: quicklime, hydrated lime, pelletized lime, cement, lignosulfonate, synthetic polymer, magnesium chloride, and a proprietary cementitious stabilizer. A laboratory procedure was developed and applied to three Virginia soils obtained from Northern …
-
Soil stabilization utilising wastepaper sludge ash
… soil stabilizer with or without blending it with quicklime (CaO), Portland Cement (PC) or with Ground Granulated Blastfurnace Slag (GGBS). The engineering behaviour (plasticity characteristics, compaction, unconfined compressive strength (UCS), linear expansion and California Bearing Ratio (CBR)) …
-
Influence of Ocean Alkalinity Enhancement on the Stability of Phytoplankton and Microzooplankton Communities
… study explored CO₂-non-equilibrated OAE with quicklime and olivine additions, revealing that, under oligotrophic conditions, phytoplankton remained unaffected. However, after nutrient enrichment, diatoms thrived, particularly in silicate-based OAE, while coccolithophores declined, highlighting …
-
Characterizing the Influence of Set-Control Admixtures on Rapid Hardening Hydraulic Cements
… and calcium carbonate (CaCO3) to produce quicklime resulting in less CO2 emissions. Despite the potential advantages of RSHCs, concerns about their long-term performance in the field along with the limited understanding of the scalability have prevented a wider implementation of the …
-
The effects of lime on the decomposition of buried human remains. A field and laboratory based study for forensic and archaeological application.
… evidence in the literature, hydrated lime and quicklime both delay the initial stages of the decay process but do not arrest it completely. The end result is ultimately the same: skeletonisation. Furthermore this study stresses the importance of the specific microenvironment in taphonomic …
-
Lime stabilization of lacustrine clays in the Canadian Prairies
… percentages of commercially available calcitic quicklime between 2% and 10% and observe the effect of lime on such engineering properties of the clays as plasticity, compaction and strength. This was primarily to confirm previous test results and to add to the existing data. 2.) To study the …
-
Life cycle assessment of lithium processing from hard-rock and spent battery materials
… as sulfuric acid, soda ash, sodium hydroxide and quicklime, are also among the significant sources of impacts. Lithium produced from battery recycling has a lower environmental burden than production from primary sources. Process modelling has been suggested as the recommended way to acquire …
-
Designing and evaluating repointing lime mortar for the conservation of historic buildings in highly exposed environments
… as the use of wood ash, porous aggregates and quicklime, qualifying them as suitable materials to optimise repointing mortar. Wood ash contributes to increase the capillary absorption capacity of mortar while giving a potential pozzolanic activity, a positive outcome when applied under humid …
-
Physicohemical and Geotechnical Evaluation of Lime Treated Soils in New and Existing Industrial Applications
Lime products (quicklime, hydrated lime and quick or hydrated lime slurry) have been widely studied and effectively used for chemical stabilization of expansive subgrade soils beneath roadways. However, several unanswered questions remain regarding the long-term durability of lime treatment and the …
-
Activated hybrid cementitious system using Portland cement and high volume Colombian fly ash with sodium sulfate
… different activators; sodium sulfate, lime and quicklime at different dosages. The mortar and concrete studies were carried out for a period of up to one year. The concrete study evaluates the performance of a 50/50 Termopaipa fly ash/PC system with 1% sodium sulfate by weight of cementitious …
-
Investigating the use of concentrated solar energy to thermally decompose limestone.
… requirements for the efficient manufacture of quicklime using solar thermal energy. To achieve these aims, the energy requirements for an industrial scale solar lime manufacturing system were first evaluated. The main conclusion from this analysis is that the thermal efficiency of a solar …
-
Evaluating reactivity and sorptivity of fly ash for use in concrete construction
… on oxide/mineralogical analysis); and (v) a quicklime slaking test. The test results were validated by strength tests with 100 mm concrete cube. Results of the above indicated good correlations between fly ash fineness, mortar flow/water requirement and (pozzolanic) activity index (standard …
-
Removal of Boron from Produced Water by Co-precipitation / Adsorption for Reverse Osmosis Concentrate
… also out-performed treatment with slaked quicklime, which was tested previously by others. Two important limitations of boron removal with magnesium chloride are the high chemical requirements (5 g/L MgCl2) and sludge production (1 g/g MgCl2 used). These are greatly mitigated by treatment …
-
Produção de olefinas leves via oxidação parcial do metano utilizando catalisadores de baixo custo
O aumento da demanda por olefinas leves, aliado à necessidade de diversificação das matérias-primas e à mitigação das emissões de gases de efeito estufa, tem impulsionado a busca por rotas alternativas e mais sustentáveis para a conversão do metano em produtos de maior valor agregado. Nesse …