Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 37 for “"R phase"”.
-
U(R) PHASE RETRIEVAL, LOCAL NORMALIZING FLOWS, AND HIGHER ORDER FOURIER TRANSFORMS
The classical phase retrieval problem arises in contexts ranging from speech recognition to x-ray crystallography and quantum state tomography. The generalization to matrix frames is natural in the sense that it corresponds to quantum tomography of impure states. Chapter 1 provides computable …
-
Low Temperature And Reduced Length Scale Behavior Of Shape Memory And Superelastic Niti And Nitife Alloys
… at low temperatures in the context of the R-phase transformation in NiTiFe alloys by recourse to arc-melting, differential scanning calorimetry (DSC), transmission electron microscopy (TEM) and mechanical testing at low temperatures; and second, to investigate superelasticity and two-way …
-
Influence of Aging and Severe Plastic Deformation on the Shape Memory Behavior of Ti-50.6at%Ni
Martensitic phase transformations were investigated for Ti -50.6 at % Ni processed via severe plastic deformation (SPD) and subsequent aging for temperatures between 400 and 550C and times ranging from 1hr to 100hrs. Phase transformations of the SPD material were compared to material processed via …
-
Directional crystallization in the bismuth-strontium-calcium-copper-oxygen system: Effect of phase separation
… microstructures. Some evidence of liquid-liquid phase separations on cooling melts of Bi₂Sr₂Ca₁Cu₂Oₓ and Pb₀ͺ₃₂Bi₁ͺ₆₈Sr₁ͺ₇₅Ca₂Cu₃Oₓ is found for the first time from Differential Thermal Analysis (DTA), X-ray Diffraction (XRD), and Transmission Electron Microscope (TEM). This made it difficult to …
-
Effects of Constrained Aging on the Shape Memory Response of Nickel Rich Niti Shape Memory Alloys
… strain, hysteresis, dimensional stability, and R-phase formation were investigated. This was accomplished through the use of isobaric thermal cycling and superelasticity experiments and various microscopy techniques that included transmission electron microscopy (TEM), scanning electron …
-
Low Temperature Nitife Shape Memory Alloys: Actuator Engineering And Investigation Of Deformation Mechanisms Using In Situ Neutr
… change as a result of a temperature-induced phase transformation. The cubic so-called austenite to the trigonal so-called R-phase transformation in NiTiFe shape memory alloys offers a practical temperature range for actuator operation at low temperatures, as it exhibits a narrow …
-
An experimental investigation of the behavior of Nitinol
… material are determined. Phenomena such as the R-phase and stress induced martensite serration are investigated. A one-dimensional constitutive model is presented that quantitatively predicts stress-strain and shape memory effect behavior and was developed with the intention of being an …
-
Transmission Electron Microscopy Studies In Shape Memory Alloys
… or stress between a cubic (B2) austenite phase and a monoclinic (B19') martensite phase. Ni-rich binary compositions are cubic at room temperature (requiring stress or cooling to transform to the monoclinic phase), while Ti-rich binary compositions are monoclinic at room temperature …
-
A Code Division Multiple Access Communication System for the Low Frequency Band
… CDMA schemes in that K users share a channel by phase modulating their transmissions with signature sequences. Our LF/CDMA scheme is different in that each user's signature sequence set consists of M orthogonal sequences and thus log(,2)M bits of information are transmitted by choosing among the …
-
Design, Fabrication And Testing Of A Low Temperature Heat Pipe Thermal Switch With Shape Memory Helical Actuators
… and actuating elements. Iron (Fe) lowers the phase transformation temperatures to cryogenic regimes of operation while introducing an intermediate, low hysteretic, trigonal R-phase in addition to the usual cubic and monoclinic phases typically observed in binary NiTi. The R-phase to cubic …
-
Commissioning Of A Dynamic Mechanical Analyzerfor The Characterization Of Low Temperature Nitife Shape Memory Alloys
… between cubic, trigonal and monoclinic phases at low temperatures. The low hysteresis associated with the trigonal R-phase transformation make them candidates for actuator applications at low temperatures. However, the literature available on these alloys is limited and there is a need …
-
Mechanische Eigenschaften und Transformationsverhalten von kieferorthopädischen Multiforce-Ni-Ti-Bögen
… geben Aufschluss über die jeweiligen Umwandlungsphasen. Ergebnisse: Die DSC Messungen zeigten in allen 4 Produkten neben Martensit und Austenit die Existenz einer R-Phase. Alle Produkte wiesen Afinish-Temperaturen <37°C auf, wobei Hersteller-spezifische Unterschiede in den 3 untersuchten …
-
Multi-axial Thermomechanical Characterization of Shape Memory Alloys for Improved Stability
… means of a reversible thermoelastic solid state phase transformation typically between so-called austenite, martensite and R-phases. The ability to do work enables their use as high-force actuators in automotive and aerospace applications while superelastic NiTi is of interest in biomedical …
-
Effect of Annealing on the Tensile Properties and Transformation Behavior of a 50.8 at.% Ni - 49.2 at.% Ti Alloy
… some or all of the cold worked martensite and R phase in the cold drawn wires to austenite, and with the variation of the austenite finish Af temperature of the reverted austenite with annealing temperature. This variation of Af is related in a complicated way with the residual stresses left in …
-
A Computational Study of Twisted Bilayer MoS2 with Intercalated Lithium
… two primary superlattices: twistedhexagonal (H-phase) and rhombohedral (R-phase) MoS2. To study these materials, we use lithium(Li) as an intercalant atom to probe induced effects at high-symmetry positions within the moirésuperlattices, based on calculated energy minimizations using density …
-
Cryogenic Shape Memory Alloy Actuators For Spaceport Technologies: Materials Characterization And Prototype Testing
… change their shape by undergoing a solid-state phase transformation at a particular temperature. The shape change is associated with a large strain recovery as the material returns to its "remembered" shape. Their ability to act as both sensor and actuator has made them an attractive subject of …
-
A Thermal, Mechanical, and Materials Framework for a Shape Memory Alloy Heat Engine for Thermal Management and Energy Recovery
… effect resulting from a temperature-induced phase transformation. This work presents a framework for the design and implementation of an SMA-based Stirling heat engine for maximum power or speed incorporating and combining mechanical, thermal, and material aspects. The motivation for this …
-
Study of piezocatalytic activities of lead-free oxide perovskite nanostructures
… In contrast, BNKT nanoparticles of morphotropic phase boundary (MPB) compositions demonstrated superior piezocatalytic performance. Bi0.5(Na1-xKx)0.5TiO3 (x = 0.15 - 0.20) nanoparticles were proven to possess the co-existence of rhombohedral (R) and tetragonal (T) phases, as suggested by the …
-
Ductilization of single phase TiAI via ternary and quaternary additions
… goal of this research was to expand the single phase γ-TiAI phase field to lower Al contents by microalloying TiAI with ternary and quaternary additions. This was done to examine whether or not lower Al single phase alloys would have improved ambient ductility. To this end, a series of ternary …
-
Laser Processing and Modelling of Multiple Memory Shape Memory Alloys
… incompressible behavior of the austenite to R-phase transformation.
Page 1 of 2