Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 229 for “"R-value"”.

  1. Prediction of Soil Layer R-Value Dependence on Moisture Content

    This study focuses on how green roof thermal performance is affected by the soil moisture in summer condition. It aims to determine whether moist soil is a better insulator during the summer months than dry soil. A soil model is developed to predict simultaneous conduction, convection, and surface …

    portland-state Repository record for Prediction of Soil Layer R-Value Dependence on Moisture Content (opens in a new tab)

  2. IMPROVING R-VALUE IN BRICK SYSTEMS USING VARIOUS PORE-FORMING AGENTS

    … have been ongoing to increase the insulation value of brick systems to hinder the conductive heat transfer through the material. The use of pore-forming agents (PFA’s) have been studied to increase the porosity within a ceramic system, through sacrificial burnout or place–holder method, which …

    clemson Repository record for IMPROVING R-VALUE IN BRICK SYSTEMS USING VARIOUS PORE-FORMING AGENTS (opens in a new tab)

  3. Correlation of resistance value (R-value) with California Bearing Ratio (CBR) for use in the design of flexible pavements

    The Resistance Value (R-value) is commonly used by the Hawaii Department of Transportation engineers to design the thickness of flexible pavements. Direct measurements of the R-value require equipment that is not readily available to most practicing engineers in the State of Hawaii. Typically, the …

    hawaii Repository record for Correlation of resistance value (R-value) with California Bearing Ratio (CBR) for use in the design of flexible pavements (opens in a new tab)

  4. The Influence of Ambient Temperature on Green Roof R-values

    … that is conducted through the green roof. The R-value, or thermal resistance, of a green roof is an effective measurement of thermal performance because it can be easily included in building energy calculations applicable to many different buildings and situations. The purpose of this study was …

    portland-state Repository record for The Influence of Ambient Temperature on Green Roof R-values (opens in a new tab)

  5. The preparation of a polyurethane elastomer and evaluation of the mechanical properties

    … material were prepared. In the first group the R value was varied from 1.0 to 4.5, (the ratio of 33’ Bitolyene 44’ diisocyanate to polyester) and fixed amounts of excess diisocyanate were used. Ethylene glycol was used as the cross-linking agent. In the second and third groups the R value was …

    vt Repository record for The preparation of a polyurethane elastomer and evaluation of the mechanical properties (opens in a new tab)

  6. The influence of matrix stoichiometry on interfacial adhesion in composites for wind turbine applications

    … of the matrix. Overall it was shown that the R value had a major influence over all of the thermomechanical properties studied. The glass transition temperature (Tg) was shown to change significantly depending on the R value, with a maximum of 87.3 °C observed at a value (R [approx. equal to] …

    strathclyde Repository record for The influence of matrix stoichiometry on interfacial adhesion in composites for wind turbine applications (opens in a new tab)

  7. Design and Construction of a Guarded Hot Box Facility for Evaluating the Thermal Performance of Building Wall Materials

    … design and build a guarded hot box to test the R-Value of building materials. The Riverside Energy Efficiency Laboratory is looking to expand their testing capabilities by including this service. Eventually, the laboratory will become energy star certified. A guarded hot box facility consists of …

    tamu Repository record for Design and Construction of a Guarded Hot Box Facility for Evaluating the Thermal Performance of Building Wall Materials (opens in a new tab)

  8. Strain hardening and anisotropic behavior of aluminum alloy 5182 subject to preform annealing

    … of material anisotropy, captured by the R-value parameter. Refinement of both of these areas will further enable the incorporation of lightweight materials, such as aluminum alloy 5182-O in automobiles, despite their traditionally lower formability than mild steel sheet. Therefore, improved …

    hawaii Repository record for Strain hardening and anisotropic behavior of aluminum alloy 5182 subject to preform annealing (opens in a new tab)

  9. Thermal performance of closed-cell foam insulation board under different temperature conditions

    … insulation materials, thermal resistance (R-value) of polyisocyanurate (polyiso) foam insulation with ‘captive blowing agent’ varies non-linearly with temperature. Building designers consider constant R-value of different insulating materials for building design and energy calculations, and …

    uvic Repository record for Thermal performance of closed-cell foam insulation board under different temperature conditions (opens in a new tab)

  10. The Relationship Between Mechanical Properties, Preferred Orientation and Press Forming Behaviour of Copper and 70/30 Brass

    … annealing. The mechanical properties and R values at 0°, 45°and 90° to the rolling direction were determined by tensile testing, while the stretch forming, deep drawing and redrawing properties were assessed using the respective Erichsen tests. An attempt was made to relate the earing …

    aston Repository record for The Relationship Between Mechanical Properties, Preferred Orientation and Press Forming Behaviour of Copper and 70/30 Brass (opens in a new tab) Download PDF for The Relationship Between Mechanical Properties, Preferred Orientation and Press Forming Behaviour of Copper and 70/30 Brass (opens in a new tab)

  11. Methodology for Determining the Variance of the Taylor Factor: Application in Fe-3%Si

    … The connection between the variance of the R-value and variance of the Taylor factor is considered. Although only a weak connection was found, it was observed that relatively small variations in the Taylor factor yield large variances in the R-value.

    byu Repository record for Methodology for Determining the Variance of the Taylor Factor: Application in Fe-3%Si (opens in a new tab) Download PDF for Methodology for Determining the Variance of the Taylor Factor: Application in Fe-3%Si (opens in a new tab)

  12. Development of machine learning models for improving and achieving target fiber diameter of electrospun nanofibers

    … achieving a coefficient of determination (R²) value of 0.93 and root mean square error (RMSE) of 127.76 nm on polyacrylonitrile (PAN) nanofibers and an R² value of 0.94 with an RMSE of 79.89 nm on polyvinyl alcohol (PVA) nanofibrous scaffolds for tissue engineering applications. In addition, a …

    wichita-thes Repository record for Development of machine learning models for improving and achieving target fiber diameter of electrospun nanofibers (opens in a new tab)

  13. Estimation of the melting points, enthalpies of melting, and entropies of melting of organic compounds

    Values for the melting points, total enthalpies of melting, and total entropies of melting of organic compounds are required in order to accurately estimate properties such as aqueous solubility and vapor pressure. These measurements, therefore, are critical to predicting how a chemical will behave …

    arizona-thes Repository record for Estimation of the melting points, enthalpies of melting, and entropies of melting of organic compounds (opens in a new tab)

  14. Determining the Validity of a New Cycle Ergometer Protocol for Estimating VO(2) Max

    … Reserve method of VO2max estimation showed an r-value of 0.89, and an SEE of 3.97 ml·min−1.kg−1. The mean value of actual VO2max was 36.9 ± 8.8 ml·min−1. kg−1, while that for the VO2R estimated VO2max was 36.7 ± 8.4 ml·min−1.kg −1. A regression performed on actual VO2max vs. the Astrand estimate …

    odu Repository record for Determining the Validity of a New Cycle Ergometer Protocol for Estimating VO(2) Max (opens in a new tab)

  15. Investigation of Applicable Seismic Response Modification Factor For Three-Hinge Glulam Tudor Arches Using FEMA P-695

    … to be evaluated for each of seven design R-values within two gravity load cases. With the performance groups evaluated, it was determined that only groups within the low gravity load level designs were successfully able to pass, none of the groups designed for high gravity loads passed the …

    vt Repository record for Investigation of Applicable Seismic Response Modification Factor For Three-Hinge Glulam Tudor Arches Using FEMA P-695 (opens in a new tab)

  16. Thermal-Mechanical Precast Concrete Panels Comprised Of Hybrid-Polymerized Sandwich Interfaces For High-Impact Projectile Resistance

    … for thermal conductivity and resistivity (R-Value); and nine concrete panels were impact-tested, engendering enhanced mechanical and thermal behavior relative to conventional fiber-reinforced composites (FRP) and also to current industry-standard expanded polystyrene (EPS) and extruded …

    uab Repository record for Thermal-Mechanical Precast Concrete Panels Comprised Of Hybrid-Polymerized Sandwich Interfaces For High-Impact Projectile Resistance (opens in a new tab)

  17. Optimisation of Embodied Carbon, Thermal Resistance and Thermal Mass of Roof Material Selections for Australian Class 1 Housing

    … of roofs, including thermal resistance (R-value) and thermal mass, plays a dominant role in energy usage for these purposes. While recent sustainable development policy changes in the Building Sustainability Index (BASIX) mandate a minimum R6.0 for roof insulation, current optimisation …

    unsw Repository record for Optimisation of Embodied Carbon, Thermal Resistance and Thermal Mass of Roof Material Selections for Australian Class 1 Housing (opens in a new tab)

  18. Predicting Diesel Engine Performance From Fuel Injector Needle Lift Duration

    … The engine torque model was found to have an R* value of 0.997, mean of 389 lbf-ft, and standard error of estimate of 7.75, indicating exceptional fit and minimal error. The fuel consumption model was found to have an R* value of 0.964, mean of 21.29 L/h, and standard error of the estimate of …

    texas-state Repository record for Predicting Diesel Engine Performance From Fuel Injector Needle Lift Duration (opens in a new tab)

Page 1 of 12