Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 12 of 12 for “"RADIOSS"”.

  1. Drop Test Simulation of a Conformable CNG Tank by Finite Element Analysis using HyperMesh/RADIOSS

    … for simulating a drop test using HyperMesh/RADIOSS, by analyzing the various simulation parameters and their effect on the drop test results. The material model used for representing the Aluminum alloy tank is Johnson Cook (LAW2 in RADIOSS). This report explains the process of obtaining the …

    mtu Repository record for Drop Test Simulation of a Conformable CNG Tank by Finite Element Analysis using HyperMesh/RADIOSS (opens in a new tab)

  2. A 3 D- FEM Study on the Stress Distributions in Pediatric Skull due to Impact from Free Fall

    … was meshed and refined using Hypermesh software. RADIOSS solver of the Hyperworks package was used to analyze and draw results for the simulation process. Various types of stresses and strains were extracted and plotted against respective drop heights.

    mtu Repository record for A 3 D- FEM Study on the Stress Distributions in Pediatric Skull due to Impact from Free Fall (opens in a new tab)

  3. Concept Tool Integration and Vehicle Model Development

    … with ANSA and performing CAE calculations in Radioss. SFE Concept is a very useful software tool to compare several concept proposals in early project phases to achieve a robust body design. It supports easy to change models but new test methods for body evaluation should be created to gain …

    chalmers Repository record for Concept Tool Integration and Vehicle Model Development (opens in a new tab)

  4. FINITE ELEMENT ANALYSIS OF CONFORMABLE CNG TANK – TOPOLOGY OPTIMIZATION AND DROP TEST SIMULATION

    … using the software packages Hypermesh and Radioss. The results show that the stresses in the tank are above the ultimate tensile strength of 55,000 psi. These results do not match with the experimental observations which show very minor plastic deformation in the tank. This discrepancy can …

    mtu Repository record for FINITE ELEMENT ANALYSIS OF CONFORMABLE CNG TANK – TOPOLOGY OPTIMIZATION AND DROP TEST SIMULATION (opens in a new tab)

  5. Frontal Crash Analysis of a Conformable CNG tank using Finite Element Analysis

    … chassis, brackets and tanks using HYPERMESH and RADIOSS. The frontal crash analysis is simulated according to FMVSS 208 standard for two impact velocities of 35 mph and 55 mph. CAD models of the brackets have been developed for this study. Material models of the truck chassis and bracket are …

    mtu Repository record for Frontal Crash Analysis of a Conformable CNG tank using Finite Element Analysis (opens in a new tab)

  6. A 3D FEM COMPARATIVE STUDY ON THE IMPACT RESPONSE BETWEEN HUMAN HEAD AND NOCSAE HEAD DUE TO FREE FALL

    … simulations. The impacts were simulated using RADIOSS solver in Hypermesh. Various parameters like contact force, linear acceleration and its components along each of the co-ordinate axes were extracted from the FE analysis. These values were utilized to calculate linear and angular …

    mtu Repository record for A 3D FEM COMPARATIVE STUDY ON THE IMPACT RESPONSE BETWEEN HUMAN HEAD AND NOCSAE HEAD DUE TO FREE FALL (opens in a new tab)

  7. Drop Test Simulation of a Conformable CNG Tank by Finite Element Analysis using ANSYS

    … criteria. These tests simulated in HyperMesh/RADIOSS by Sumit Bongir and in Abaqus by Paul Roehm have shown little discrepancies in results compared with physical test results. This report discusses the same experimental drop tests simulated using ANSYS and check for how good ANSYS is in …

    mtu Repository record for Drop Test Simulation of a Conformable CNG Tank by Finite Element Analysis using ANSYS (opens in a new tab)

  8. Development of a finite element dummy model for improved lying-occupant safety evaluation

    … simulations of a truck frontal impact using the Radioss finite element solver. The work began with a literature study in order to find out which kind of occupant model would be useful for the purpose. An available FE model of the US SID, a crash test dummy used as an occupant substitute in car …

    chalmers Repository record for Development of a finite element dummy model for improved lying-occupant safety evaluation (opens in a new tab)

  9. A Study of Knee Injury Mechanisms in Car-to-Pedestrian Impacts Using

    … by using MADYMO MBS-FEM coupling technique and RADIOSS program respectively. One was the EEVC legform model, another the human lower limb model (LLMS) developed by MECALOG in France. The knee and leg injury mechanisms were first investigated using EEVC legform model. The influence of car front …

    chalmers Repository record for A Study of Knee Injury Mechanisms in Car-to-Pedestrian Impacts Using (opens in a new tab)

  10. Sahraei failure criteria for detection of short circuit in lithium-ion batteries

    … commercial simulation software, including Altair RADIOSS and Ansys LS-DYNA. The failure model is validated under various loading conditions, such as hemispherical and rod indentations, in-plane loading, and three-point bending. By defining the jellyroll’s failure strain based on the interaction of …

    temple Repository record for Sahraei failure criteria for detection of short circuit in lithium-ion batteries (opens in a new tab)

  11. Arbitrary Lagrangian-Eulerian Method Investigation On Fuel Tank Strap Simulation Under Proving Ground Condition

    … the nonlinear large rotation dynamic method with RADIOSS, a commercial code. After the stress distribution of the fuel tank strap is achieved, a commercial fatigue code, nCode DesignLife, is used to predict the fatigue life of the fuel tank straps. In this research, the stress distribution of the …

    wayne-thes Repository record for Arbitrary Lagrangian-Eulerian Method Investigation On Fuel Tank Strap Simulation Under Proving Ground Condition (opens in a new tab)

  12. A NOCSAE DROP TEST/ 3D-FEM STUDY ON THE RELATIONSHIP BETWEEN KINEMATIC RESPONSE OF THE HEAD, HEAD IMPACT CONTACT PRESSURE (HICP) AND KINETIC RESPONSE OF THE BRAIN TO DELINEATE THE RISK OF TRAUMATIC BRAIN INJURIES (TBI).

    … as an input for finite element (FE) analysis in Radioss module from Hypermesh, using a 3-D FE model of a 50th percentile human male from the National Library of Medicine (NLM) Visible Human Project (VHP), to study the response of brain during these impacts. Various entities like resultant …

    mtu Repository record for A NOCSAE DROP TEST/ 3D-FEM STUDY ON THE RELATIONSHIP BETWEEN KINEMATIC RESPONSE OF THE HEAD, HEAD IMPACT CONTACT PRESSURE (HICP) AND KINETIC RESPONSE OF THE BRAIN TO DELINEATE THE RISK OF TRAUMATIC BRAIN INJURIES (TBI). (opens in a new tab)