Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 1100 for “"RANS"”.

  1. Boussinesq-equation and rans hybrid wave model

    … Reynolds Averaged Navier-Stokes (RANS) wave models. The two constituents are two-way coupled with the interface placed at a location where turbulence is relatively small. Boundary conditions on the interfacing side of each model is provided by its counterpart model through data …

    tamu Repository record for Boussinesq-equation and rans hybrid wave model (opens in a new tab)

  2. Experimental and RANS-CFD Study of Nacelle Drag

    … guidance and insight into the capabilities of RANS-based CFD. The research goal was to determine whether industry constrained CFD could participate in the aerodynamic design of nacelle bodies. Grid refinement level, turbulence model and near wall treatment settings, to predict drag to the …

    queens Repository record for Experimental and RANS-CFD Study of Nacelle Drag (opens in a new tab)

  3. RANS turbulence models for FENE-P viscoelastic fluids

    … is to develop Reynolds Averaged Navier-Stokes (RANS) models based on the Finitely Extensible Nonlinear Elastic Peterlin (FENE-P) rheological constitutive model for the polymer chains, to predict mean features of drag reducing flows. A DNS database from multiple literature sources is collated to …

    whiterose Download PDF for RANS turbulence models for FENE-P viscoelastic fluids (opens in a new tab)

  4. Hybrid RANS LES simulation of non-equilibrium boundary layers

    … the Reynolds-Averaged Navier-Stokes equations (RANS) to Large-Eddy Simulations (LES) have the ability to apply the high accuracy of LES only in regions of the flow that demand it, while using the less expensive RANS approach in regions of the flow where standard turbulence models are expected to …

    maryland Repository record for Hybrid RANS LES simulation of non-equilibrium boundary layers (opens in a new tab)

  5. RANS CFD Methodologies for a PWR Fuel Rod Assembly

    … (CFD) to examine fluid dynamics and heat transfer characteristics for turbulent flows around pressurized water reactor (PWR) fuel rod bundles with support grids. The NESTOR experiment performed by CEA-EDF-EPRI provided accurate data for various variables (mean and RMS axial velocities, …

    tamu Repository record for RANS CFD Methodologies for a PWR Fuel Rod Assembly (opens in a new tab)

  6. Machine learning techniques for accuracy improvement of RANS simulations

    … the use of Reynolds Average Navier-Stokes (RANS) models is a necessity. However, the obtained models from this approach have low accuracy. This fact justifies the high demand for better models. In this work, a technique that uses machine learning, by means of neural networks, is used to …

    brazil-uerj Repository record for Machine learning techniques for accuracy improvement of RANS simulations (opens in a new tab)

  7. Assessment of RANS Turbulence Models for Strut-Wing Junctions

    … in these studies have not been validated for transonic, high Reynolds number, junction flows. This study intends to assess turbulence models by comparing drag and surface streamlines obtained from experiment and CFD. The test model is a NACA 0012 fin at Mach number of 0.75 and a Reynolds number …

    vt Repository record for Assessment of RANS Turbulence Models for Strut-Wing Junctions (opens in a new tab)

  8. Assessment of RANS Turbulence Models for Hypersonic Flat Plates

    … the performance of the Menter Shear Stress Transport (SST) and Spalart–Allmaras (SA) models on a group of hypersonic flat plate cases from a recent direct numerical simulation (DNS) database. Quantities of interest examined include velocity, temperature, turbulent kinetic energy, modeled …

    vt Repository record for Assessment of RANS Turbulence Models for Hypersonic Flat Plates (opens in a new tab)

  9. RANS STUDY OF FULLY DEVELOPED WIND TURBINE ARRAY BOUNDARY LAYERS

    … farms using Reynolds Averaged Navier Stokes (RANS) simulations. RANS is a less expensive method compared to LES; however, no studies concentrate on the accuracy of RANS in modeling the fully developed asymptotic flow in wind farms. In this work, we conduct RANS simulations with a periodic …

    jhu Repository record for RANS STUDY OF FULLY DEVELOPED WIND TURBINE ARRAY BOUNDARY LAYERS (opens in a new tab)

  10. RANS-Based mixing noise predictions of installed asymmetric jet flows

    As the world’s dependency on air travel and transportation increases, the public’s concern over noise pollution around airports grows. Engine manufacturers must meet increasingly stringent noise certification targets while designing new products. Traditional noise analysis techniques often assume …

    soton Download PDF for RANS-Based mixing noise predictions of installed asymmetric jet flows (opens in a new tab)

  11. Assessment of Turbulence Length Scales in Hybrid RANS-LES Methods

    … be numerically predicted reliably by classical RANS model. At the other end, using high-fidelity approaches such as DNS and LES to resolve the rotor flow-field at practical Reynolds number is beyond the current computational capabilities. Therefore, the main objective of this work is to develop …

    maryland Repository record for Assessment of Turbulence Length Scales in Hybrid RANS-LES Methods (opens in a new tab)

  12. Advanced Turbulence Modeling Strategies Within the Hybrid RANS-LES Framework

    Reynolds Averaged Navier-Stokes (RANS) models still represent the most common turbulence modeling technique used in Computational Fluid Dynamics (CFD) today. RANS models are preferred primarily due to their relatively low computational demand and ease of use. The general RANS framework utilizes the …

    oklahoma-thes Repository record for Advanced Turbulence Modeling Strategies Within the Hybrid RANS-LES Framework (opens in a new tab) Restricted access

  13. Level-set RANS method for sloshing and green water simulations

    … into the Reynolds- Averaged Navier-Stokes (RANS) numerical method for the time-domain simulation of green water effects. This generalized method can be used to evaluate two- and three-dimensional, laminar and turbulent, free surface flows in moving non-orthogonal grids. In the method, free …

    tamu Repository record for Level-set RANS method for sloshing and green water simulations (opens in a new tab)

  14. Hybrid RANS-LES simulations for separated flows using dynamic grids

    A hybrid RANS-LES approach is used in this thesis to simulate the unsteady aerodynamic flows. Different cases are investigated such as high Reynolds number flows around a circular cylinder, flows over an Aerospatiale A-aerofoil at stall conditions and flows around a flapping wing with mesh …

    whiterose Download PDF for Hybrid RANS-LES simulations for separated flows using dynamic grids (opens in a new tab)

  15. Effects of Turbulence Modeling on RANS Simulations of Tip Vortices

    … of this thesis is to quantify the effects of RANS turbulence modeling on the resolution of free shear vortical flows. The simulation of aerodynamic wing-tip vortices is used as a test bed. The primary configuration is flow over an isolated finite wing with aspect ratio, , and Reynolds number, …

    vt Repository record for Effects of Turbulence Modeling on RANS Simulations of Tip Vortices (opens in a new tab)

  16. Trailing Edge Noise Prediction Using a RANS-based Statistical Method (RSNM)

    … of this research is to investigate and develop a RANS-based Statistical Noise Model (RSNM) for trailing edge noise. The method combines Reynolds-averaged Navier-Stokes (RANS) turbulent ow solutions with statistical models of the turbulent ow field, namely the turbulent velocity cross-spectrum. Hot …

    adelaide Repository record for Trailing Edge Noise Prediction Using a RANS-based Statistical Method (RSNM) (opens in a new tab)

  17. A RANS-based jet noise prediction method using ray tracing method

    … tools based on Reynolds Averaged Navier-Stokes (RANS) and Computational Aero-Acoustics (CAA) methods have been the current focus of industries to aid the design and development of quieter nozzles with novel configurations for future aircraft. In the current work, improvements to a RANS-based jet …

    soton Download PDF for A RANS-based jet noise prediction method using ray tracing method (opens in a new tab)

  18. RANS-based prediction of noise from isothermal and hot subsonic jets

    … acoustic analogy and information from a steady RANS solution of the flow to compute turbulence two-point statistics. RANS-based methods rely on empirical modelling but may provide the optimum balance between computational cost and generality needed by the industry to design the next generation …

    soton Download PDF for RANS-based prediction of noise from isothermal and hot subsonic jets (opens in a new tab)

Page 1 of 55