Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 74 for “"RANS/LES"”.
-
Hybrid RANS LES simulation of non-equilibrium boundary layers
… the Reynolds-Averaged Navier-Stokes equations (RANS) to Large-Eddy Simulations (LES) have the ability to apply the high accuracy of LES only in regions of the flow that demand it, while using the less expensive RANS approach in regions of the flow where standard turbulence models are expected to …
-
Assessment of Turbulence Length Scales in Hybrid RANS-LES Methods
… many scenarios of practical interest. Key examples of these scenarios include static stall over fixed wing aircraft and dynamic stall over rotorcraft blades. During rotor operation at high advance ratio, the stall events lead to loss in performance of the rotorcraft and may cause severe …
-
Advanced Turbulence Modeling Strategies Within the Hybrid RANS-LES Framework
Reynolds Averaged Navier-Stokes (RANS) models still represent the most common turbulence modeling technique used in Computational Fluid Dynamics (CFD) today. RANS models are preferred primarily due to their relatively low computational demand and ease of use. The general RANS framework utilizes the …
-
Hybrid RANS-LES simulations for separated flows using dynamic grids
A hybrid RANS-LES approach is used in this thesis to simulate the unsteady aerodynamic flows. Different cases are investigated such as high Reynolds number flows around a circular cylinder, flows over an Aerospatiale A-aerofoil at stall conditions and flows around a flapping wing with mesh …
-
A novel dynamic forcing scheme incorporating backscatter for hybrid RANS/LES
In hybrid RANS/LES, Reynolds-averaged Navier-Stokes (RANS) equations method is used to treat the near-wall region and large-eddy simulation (LES) is applied to the core turbulent region. Owing to the incompatibility of these two numerical modelling approaches, an artificial (i.e., non-physical) …
-
Hybrid RANS-LES closure for separated flows in the transitional regime
… such as massively separated boundary layers or transition to turbulence are common in engineering applications and need to be accurately captured in order to predict the vehicle performance. The recent advances in numerical methods and turbulence modeling have resolved each of these issues …
-
Modelling of active flow control devices using hybrid RANS/LES techniques
… against the richness of the time and spatial scales in a turbulent boundary layer. In order to carry out this investigation, computational fluid dynamics CFD simulations are performed. The turbulence modelling approach for the two dimensional initial cases is RANS and URANS and with regards to 3D …
-
Passive and active flow control studies using hybrid RANS/LES methods
… of flow is numerically studied using hybrid RANS/LES approaches. Flow control effect and control mechanisms are studied through both instantaneous and statistically-averaged flow properties. Behaviours of hybrid RANS/LES methods in these three types of flow are also investigated. Flow over a …
-
Hybrid RANS-LES Hemolytic Power Law Modeling of the FDA Blood Pump
This study applies the SBES and IDDES hybrid RANS-LES turbulence models along with the K-ω SST model to four flow conditions of the FDA blood pump. Validation of all three turbulence models show good agreement with experimental pressure and velocity fields. Evaluation of turbulent kinetic energy …
-
Hybrid RANS-LES modeling of high-speed shock turbulent boundary layer interactions
Three hybrid RANS/LES studies of supersonic and hypersonic shock turbulent boundary layer interactions (STBLIs) are considered. The first simulation studies an attached hypersonic turbulent boundary layer at Mach $7.2$ and $Re_\theta \approx 3300$ through $8^{\circ}$ compression corner with cold …
-
Subgrid and hybrid RANS/LES models for scalar transport and boundary layer transition
… scalar; (ii) on the formulation of a hybrid RANS/LES model for transitional flows; and (iii) on the large eddy simulation (LES) of passive scalar transport in transitional boundary layer over a flate plate and development toward an improved Higher Order Generalized Gradient Diffusion …
-
Adaptive Detached Eddy Simulation and Passive Scalar Transport Modeling for Hybrid RANS/LES
… Eddy Simulation model more like traditional LES in eddy simulation region. Work done by Reddy et al. (2014a) proposed the l^2w DDES model that shares a similar formulation with Smagorinsky model in eddy simulation region.</p> <p>In the present research, an adaptive procedure was devised (Yin …
-
CFD INVESTIGATION OF A PULSE JET MIXED VESSEL WITH RANS, LES, AND LBM SIMULATION MODELS
… for process design and operator training. Three transient simulation models, developed using Large Eddy Simulation (LES), unsteady Reynolds-Averaged Navier-Stokes (RANS), and Lattice Boltzmann Method (LBM) techniques, are compared to velocity measurements acquired for 3 test scenarios at 3 …
-
Simulations of injection, mixing, and combustion in supersonic flow using a hybrid RANS/LES approach.
There is a great need for accurate and reliable numerical simulation of injection, mixing, and combustion in supersonic combustion ramjet engines. This study seeks to improve the accuracy and reliability which these flow can be simulated with by investigating the use of recent improvements in …
-
Development of an advanced Hybrid (U)RANS/LES turbulence models using Scale Adaptive Simulation (SAS) method
… among Reynolds-Averaged Navier- Stokes (RANS) and Large Eddy Simulation (LES) models. The RANS models are de- vised to model all the length scales of the associated flow field and provides often inaccu- rate results in complex flows such as flow separation and reattachment. In contrast, …
-
Hybrid RANS-LES Analysis of Turbulent Flame under Near Blow-off Condition in a Multi-Stage Swirl Combustor
… swirl combustor using Ansys Fluent. The hybrid RANS-LES turbulence model, Stress Blended Eddy Simulation (SBES) coupled with Flamelet Generated Manifold (FGM) combustion model was selected to model the turbulence fluctuations. A reduction in swirl intensity prevented the formation of …
-
Development and Investigation of a Novel Near-Wall Methodology for Large-Eddy Simulation Based on Dynamic Hybrid RANS-LES
… flow over the entire range of length and time scales. Several different approaches have been introduced to address this computational cost issue, namely Reynolds-averaged Navier-Stokes (RANS) modeling and scale resolving methods. Reynolds averaging is the least computationally expensive approach, …
-
Validation Studies of a Dynamic Hybrid RANS-LES Turbulence Modeling Strategy for CFD Simulation of Gas Turbine Component Film Cooling
… is important for ensuring effective heat transfer design. These flow fields are highly turbulent and anisotropic, making the accuracy and efficiency of the chosen turbulence model an important aspect of performing high quality computational fluid dynamics (CFD) based analysis. Current …
-
Extending the active model split to compressible flows
Hybrid RANS/LES models have consistently shown superior accuracy over RANS in predictions of massively separated flows. However, these models have experienced difficulties with modeled stress depletion, smooth-wall separated flow, and shock-separated flows. The Active Model Split (AMS) …
-
Wall-models for large eddy simulation based on a generic additive-filter formulation
… are addressed by deriving the exact hybrid RANS/LES Navier-Stokes equations. These equations are derived by introducing an additive-filter, which linearly combines the RANS and LES operators with a blending function. The equations derived predict additional hybrid terms, which represent the …
Page 1 of 4