Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"RANS Turbulence Modeling"”.
-
Influence of Molten Salt (Flinak) Thermophysical Properties on a Heated Tube Using CFD Rans Turbulence Modeling of an Experimental Testbed
… reactor designs, it is required that the heat transfer is well characterized. For this purpose, turbulence models used for FLiNaK flow must be valid, and its thermophysical properties must be accurately described. In the literature, several expressions for each material property can be found, …
-
Neural Operators for Learning Complex Nonlocal Mappings in Fluid Dynamics
Accurate physical modeling and accelerated numerical simulation of turbulent flows remain primary challenges in CFD for aerospace engineering and related fields. This dissertation tackles these challenges with a focus on Reynolds-Averaged Navier--Stokes (RANS) models, which will continue to serve …
-
A Near Field Lagrangian Particle Modeling for the Multiphase Flow of Reaction Control System Thrusters in Space Environments
… fidelity, but more computationally efficient, RANS turbulence modeling. Particle properties are compared against a regime-defining parameter to understand the trends in behavior. Finally, the work closes out on a preliminary look into implementing fully reacting flow chemistry for the …
-
Turbulence Closure Modeling Using Kolmogorov-Arnold Networks and Bayesian Optimization
… to improving Reynolds-averaged Navier–Stokes (RANS) turbulence modeling through machine learning and optimization. First, we introduce a realizability-informed framework for training stable and physically consistent machine learning-based anisotropy closures within the tensor basis neural …
-
Effects of Turbulence Modeling on RANS Simulations of Tip Vortices
… of this thesis is to quantify the effects of RANS turbulence modeling on the resolution of free shear vortical flows. The simulation of aerodynamic wing-tip vortices is used as a test bed. The primary configuration is flow over an isolated finite wing with aspect ratio, , and Reynolds number, …
-
Computational Investigation of Supercritical CO2 Single-Jet Impingement
… jet impingement with sCO2 is studied using RANS turbulence modeling to ascertain the reliability of these models as practical design guides as well as to explore potential avenues of future research. Benchmark cases using air are employed to develop a model with sCO2 that is as grounded in …
-
Age Effects on Iron-Based Pipes in Water Distribution Systems
… the importance of correcting pipe diameters when modeling water distribution systems containing aged pipes was investigated. Correcting the pipe diameters in the sample network reduced the modeled water age by up to 10% and changed the pattern of fluctuating water age that occurred as waters with …
-
Physics-Informed, Data-Driven Framework for Model-Form Uncertainty Estimation and Reduction in RANS Simulations
… flows, the Reynolds-Averaged Navier-Stokes (RANS) equations based models are still the dominant tools for industrial applications. However, the predictive capability of RANS models is limited by potential inaccuracies driven by hypotheses in the Reynolds stress closure. With the …
-
Modeling Mixing and Combustion of Opposed Fuel Jets with Experimental Validation
… breakup model, Reynolds-Averaged Navier-Stokes (RANS) turbulence modeling, Hiroyasu-NSC soot modeling, and detailed chemical models adapted to F-24 jet fuel. Simulations and experiments were conducted for multiple injector configurations, including BS10 single-jet, BS10-BS11 opposed-jets, and BD3 …
-
Unsteady data-driven and hybrid LES/RANS simulations of turbulent flows
… providing insights into complex flow structures, turbulence, and interactions at a much finer scale. In numerous engineering disciplines, turbulent flow simulations based on the unsteady Reynolds-averaged Navier-Stokes (URANS) equations are computationally affordable and widely applied to unsteady …
-
Compressible Corrections for Turbulence Models in High Speed Boundary Layer Flow
… because they have little to no reliance on turbulence models which may not accurately capture the physics driving the turbulent motion. The disadvantage of DNS and LES, especially in wall bounded, high Reynolds number flows, is the strict spatial and temporal resolution requirements that …
-
Experimental and Numerical Modeling of NOx Formation in Premixed Combustion of Pure and Renewable Liquid Fuels
… and methane. Reynolds Average Navier Stokes (RANS) turbulence modeling is initially used for each case to develop a solution that is later utilized to initialize the Large Eddy Simulation (LES) modeling of the flow. Modeling chemistry correctly is essential for this study, therefore, the …
-
On the Simulation of Supersonic Flame Holder Cavities with OpenFOAM
… Laboratory (AFRL). The effect of the type of turbulence model, size of the chemical mechanism, and geometry used for simulation are explored. These results collected are intended to help with the transition between high-fidelity research-level simulations and lower-fidelity design-level …
-
Data-driven models for turbulent separated flows
L'abstract è presente nell'allegato / the abstract is in the attachment
-
RANS-based aerodynamic optimization of a pickup truck: performance assessment and verification of add-on improvements
… the open and closed bed, using steady state RANS turbulence model and wind tunnel validation. Three turbulence models, Realizable k − ε, Lag EB k − ε, and SST k − ω were evaluated against experimental data to determine the most accurate approach for predicting drag trends across …
-
Computational Assessment of Flow through a High-Flow Nacelle Bypass for Low Supersonic Boom
… studies are conducted using traditional RANS-based methods. Three levels of geometric complexity are considered—including the full engine, only the aft vane sections, and only one channel from the aft section—to evaluate global and local flow characteristics and to evaluate the influence …