Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"RANS simulation"”.
-
Flow uniformity characterization in catalytic converters under turbulent inlet conditions
… evaluate the added value of using Detached Eddy Simulation (DES) simulation over Reynolds-Averaged Navier-Stokes (RANS) simulation for analysis of turbulent flow inside catalytic converters. The meshing and simulation of the domain was carried out using ANSYS FLUENT and ANSYS Workbench. Initially …
-
Numerical simulation of the aerodynamic performance of an H-rotor.
… in this study. One is based on direct numerical simulation (DNS) method and another is based on Reynolds averaged Navier-Stoke (RANS) model. For DNS study we solve the incompressible Navier-Stokes equations with a CFD package, OVERTURE. An overlapping moving grids technique is employed to handle …
-
Large eddy simulation of flow in water and wastewater disinfection reactors
… less accurate Reynolds-Averaged Navier-Stokes (RANS) simulation. In order to provide a deep understanding of the hydrodynamics and solute transport phenomena in these reactors, high resolution numerical studies using the Large Eddy Simulation (LES) method are performed. The reactor geometries …
-
CFD investigation of a generic vehicle side-view mirror
… and unsteady Reynolds-Averaged Navier Stokes (RANS) simulation models is used. Three cases at different freestream speeds of 20, 30 and 40 m/s are simulated. To ensure accurate results, a mesh independence study is carried out for the 40 m/s case with steady RANS simulation. The final mesh is …
-
Experimental and numerical study of Taylor-Couette flow
… by means of Reynolds-average Navier-Stokes (RANS) simulations and stereo-PIV. Two main turbulence models of Reynolds-average Navier-Stokes simulations are used in the investigation and verified with the PIV experimental data. The investigations provide in-depth evaluation of the simulation …
-
Large Eddy Simulation of dispersed multiphase flow
… between the Reynoldsaveraged Navier-Stokes (RANS) simulation and the Large Eddy Simulation (LES) of high injection pressure diesel sprays under non-evaporating or evaporating conditions. The second topic is the comparison of the fuel behavior in the spray process between the hydrotreated …
-
Numerical Modeling of the Effects of a Free Surface on the Operating Characteristics of Marine Hydrokinetic Turbines
… scale. We use a Reynolds Averaged Navier Stokes (RANS) simulation with a Blade Element Theory (BET) model of the turbine and with a Volume of Fluid model, which is used to track the free surface dynamics, to understand the physics of the wake-free surface interactions. Pressure and flow rate …
-
Numerical study of the steady/unsteady multibody interaction in ship propulsion systems
… the computational cost of a fully unsteady RANS simulation for the multibody interaction problems in the ship propulsion system. To achieve this, the boundary element method (BEM) can be coupled with a RANS solver. The rapid-changing propeller-induced flow is first decoupled from the …
-
Reynolds-averaged Navier-Stokes simulation of turbulent flow in a circular pipe using OpenFOAM®
A RANS simulation of flow through a pipe is performed and validated against experimental data and previous DNS results. A mesh refinement study is performed to illustrate the near wall mesh size needed to correctly predict mean flow characteristics. In addition, aspects of the model are changed to …
-
Model Studies of Slag Metal Entrainment in Gas Stirred Ladles
… has been shown to abruptly increase the mass transfer rates of refining reactions through high temperature and water modeling studies of the past. However such an effect has not been correlated with the degree of entrainment, since the latter has not been quantified in terms of operating …
-
Combustion modeling with conditional source-term estimation and laminar flamelet decomposition
… the mean chemical source term in a predictive RANS simulation of two different problems. With this model, integral equations relating the unconditional mean temperature and species fields to the conditional means are used to determine the flame structure as a combination of basis functions …
-
Conditional source-term estimation methods for turbulent reacting flows
… obtain chemical closure in turbulent combustion simulation. A Laminar Flamelet Decomposition (LFD) and then a Trajectory Generated Low-Dimensional Manifold (TGLDM) method are combined with CSE in Reynolds-Averaged Navier Stokes (RANS) simulation of non-premixed autoigniting jets. Despite the …
-
A new methodology for sizing and performance predictions of a rotary wing ejector
… steady-state, Reynolds-averaged Navier-Stokes (RANS) models are implemented for sectional lift and drag predictions required for the rotor aerodynamic model associated with both the rotary wing ejector sizing and performance procedures. A three-dimensional, unsteady, RANS simulation of the …
-
Development and Verification of a Navier-Stokes Solver with Vorticity Confinement Using OpenFOAM
… methods. VC shares similarities with large eddy simulation (LES), but its behavior is based on a stable negative dissipation of vortical structures controlled by the automatic balance between two parameters, <em>μ</em> [mu] and ε [epsilon].</p> <p>In this thesis, three-dimensional, …
-
Mathematical Modeling of Nonpremixed Turbulent Methane-Air Flameless Combustion in a Strong-Jet/Weak-Jet Burner
… steady-state Reynolds-Averaged Navier-Stokes (RANS) simulation was conducted for the turbulent flameless combustion in the SJ/WJ furnace, based on the Probability Density Function (PDF)/Mixing approach. The set of 2-D manifolds and Conditional Source-term Estimate (CSE) method were used for the …
-
Experimental and Numerical Study of Multi- Phase Flow in a Coaxial Air Jet
… field were compared to the results of numerical simulations using different Reynolds Average Navier Stokes (RANS) models. The k-ε realizable model provided the best agreement with the axial velocity measurements, but all the RANS models predicted a recirculation zone immediately downstream of the …
-
Experimental examination of new separated turbulent flow validation test geometry
… tool for aeronautic design, however current simulations are challenged by turbulent separated flows due to their complexity. A new series of experiments are required to provide insights into the simulation challenges of this flow and to assist with the validation of future turbulence models. …
-
OPTIMIZATION OF TWISTED RUDDER (With Bulb and Hub Cap)
… coupling Reynolds-Averaged Navier-Stokes RANS method and Boundary Element method BEM. Solvers are the stationary OpenFOAM RANS simpleFoam and the unsteady BEM PROCAL. The use of this coupled method will reduce the computational time requirements compared to a fully RANS simulation. Thus …
-
Assessment of tip planform effects on the hover characteristics of helicopter rotors
A distinguishing feature of helicopters compared to other flight vehicles is their reliance on the main rotor for all forces and moments needed to operate the vehicle. With the use of cyclic and collective pitch variations, pilots can readily vary and control the thrust, propulsive and side forces. …
-
Investigation of Turbulent Spray Flames Using the Conditional Source-term Estimation (CSE) Approach
… accounted for. Reynolds-Averaged Navier-Stokes (RANS) and Large Eddy Simulation (LES) equations for gas combustion are solved along with the Lagrangian equations to determine the liquid phase source terms. The mass, momentum, enthalpy, and species equations are solved with adequate closures for …
Page 1 of 2